Home > Bissell > Cleaner > Bisell Pet Hair Eraser 42H5 User Manual

Bisell Pet Hair Eraser 42H5 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Bisell Pet Hair Eraser 42H5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 201 Bissell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							2Thank You
    USER'S GUIDE
    42H5 SERIES 220-240V
    Safety Instructions
    Product View
    Assembly
    Operations
    Maintenance and Care
    TroubleshootingReplacement Parts3
    4
    5
    6-8
    9-12 13
    14
    Warranty
    Consumer Services15
    16 
    						
    							www.bissell.com 
    Thanks for buying a BISSELL Vacuum 
    We’re glad you purchased a BISSELL Pet Hair Eraser vacuum.  
    Everything we know about floor care went into the design and  
    construction of this complete, high-tech home cleaning system.
    Your BISSELL Pet Hair Eraser cylinder vacuum is well made, and we 
    back it with a limited one year warranty. We also stand behind it 
    with a knowledgeable, dedicated Consumer Services department, 
    so, should you ever have a problem, you’ll receive fast, considerate 
    assistance.
    My great-grandfather invented the floor sweeper in 1876. Today, 
    BISSELL is a global leader in the design, manufacture, and service  
    of high quality homecare products like your   
    BISSELL Pet Hair Eraser cylinder vacuum.
    Thanks again, from all of us at BISSELL.
    Mark J. Bissell 
    Chairman, President & CEO
     2  
    						
    							www.bissell.com 
    IMPORTANT SAFETY INSTRUCTIONS
     3
    When using an electrical appliance, 
    basic precautions should be observed, 
    including the following: 
    REAd ALL   
    INSTRUCTIONS  
    BEFORE USIN g YOUR  
    CYLINdER VACUUM. 
     
       WARNIN g: To  
    reduce the risk of fire, 
    electric shock, or injury:
     ■  Unplug from outlet when not in use 
    ■ Use indoors only.
    ■ For dry pick up only.
    ■ Do not leave machine when it is plugged in.
    ■ Do not use with damaged cord or plug.
    ■ If appliance is not working as it should, has 
    been dropped, damaged, left outdoors, or 
    dropped into water, return it to a service agent.
    ■ Do not handle unit with wet hands.
    ■ Do not pull or carry by cord, use cord as a 
    handle, close door on cord, pull cord around 
    sharp corners or edges, run appliance over 
    cord, or expose cord to heated surfaces.
    ■ Do not unplug by pulling on cord. Unplug 
    by grasping plug.
    ■ Do not run appliance over cord.
    ■ Do not handle plug or appliance with wet hands.
    ■ Do not expose hair, loose clothing, fingers 
    or body parts to openings or moving parts.
    ■ Do not pick up hot or burning objects such 
    as cigarettes, matches, or hot ashes.
    ■ Do not pick up flammable or combustible 
    materials (lighter fluid, petrol, kerosene, etc.) or 
    use in the presence of explosive liquids or vapour.
    ■ Do not use appliance in an enclosed space filled 
    with vapours given off by oil base paint, paint 
    thinner, some moth proofing substances,   
    flammable dust, or other explosive or toxic 
    vapours.
    ■  Not intended for use by persons (including 
    children) with reduced physical, sensory or 
    mental capabilities, or lack of experience 
    and knowledge, unless they have been 
    given supervision or instruction concerning 
    use of the appliance by a person  
    responsible for their safety
    ■ Young children should be supervised to ensure 
    that they do not play with the appliance.
     
    ■  Remove plug from electrical outlet before 
    cleaning or maintaining the appliance.
    ■  If the supply cord is damaged, it must be 
    replaced by the manufacturer or its service 
    agent in order to avoid a hazard.
    ■ Do not pick up toxic material (chlorine 
    bleach, ammonia, drain cleaner, petrol, etc.).
    ■ Do not use for any purpose other than 
    described in this User’s Guide.
    ■ Use only manufacturer’s recommended 
    attachments.
    ■ Do not use with any opening blocked; keep 
    free of dust, lint, hair, and anything that 
    may reduce air flow.
    ■ Keep appliance on a level surface.
    ■ Turn off all controls before unplugging.
    ■ Be extra careful when cleaning stairs.
    ■ This appliance is provided with double 
    insulation. Use only identical replacement 
    parts.
    ■ Do not use without the dirt cup and filters 
    in place.
    ■ Pay close attention when working   
    around children.
    SAVE THESE   
    INSTRUCTIONS 
    FOR FUTURE USE
    This model is for household use only.
    IMPORTANT FOR OPERATION ON A 220-240 VOLT 
    A.C. 50 Hz POWER SUPPLY ONLY. 
    If your appliance is fitted with a   
    nonrewireable BS 1363 plug it must not be 
    used unless a 13 amp (ASTA approved to BS 
    1362) fuse is fitted in the carrier contained 
    in the plug. (Spares may be obtained from 
    your BISSELL supplier). If for any reason the 
    plug is cut off, it must be disposed of, as it is 
    an electric shock hazard should it be inserted 
    into a mains socket.   
    						
    							www.bissell.com 4
    Telescoping 
    Extension WandHandle
    Air Flow Regulator
    Easy Empty™ 
    Dirt Cotainer
    Product view
    Flex Hose
    CAUTION:   Do not plug in your  
    vacuum until you 
    are familiar with all 
    instructions and  
    operating procedures.
    Upholstery ToolCrevice Tool Wide Pet 
    TurboBrush™ Tool
    Dusting Brush
    Pet Contour Tool
    ™
    Hose Connector
    Multi Surface 
    Floor Nozzle
    Brush Switch  
    						
    							www.bissell.com 
    Assembly 
    1. Connect the hose to the vacuum by 
    inserting the hose connector into the 
    suction opening on the bottom front 
    of the vacuum.  Push in until it clicks 
    into the locked position.
    2. Connect the telescoping extension 
    wand to the handle end of the hose.
    3. Connect the floor nozzle foot onto 
    the telescoping extension wand.
    4. Attach the tool holder onto the top 
    portion of the extension wand.  
    Place the tools onto the tool holder 
    for storage.
    5. To extend the telescoping extension 
    wand, push the black release button 
    and then pull the bottom of the wand 
    to the desired length.
    6. Once assembled, you can store your 
    vacuum by inserting the storage clip 
    (located on the back of the floor 
    nozzle) into the storage slot on the 
    rear of the vacuum.
    NOTE: Shorten the length of the 
    telescoping extension wand for 
    storage.
    WARNING:  Plastic film can be   
    dangerous.  To avoid danger 
    of suffocation, keep away 
    from babies and children.
    1.
    4.2.
    3.
    5  
    						
    							www.bissell.com 
    Operations
    6
    Power cord
    The power cord is located at the rear of 
    the vacuum. Gently pull out the power 
    cord, watching for the yellow line. Stop 
    pulling the power cord once the yellow 
    line is visible. There is also a red line, 
    which indicates the end of the usable 
    cord. Do not pull the power cord out 
    beyond the red line. 
    Automatic cord rewind
    Your vacuum is equipped with an 
    automatic cord rewind. When cleaning 
    is finished, press the power button 
    OFF (    ) and grasp the plug to  
    disconnect from the electrical outlet. 
    Hold the plug and press the  
    automatic cord rewind button to 
    rewind the cord automatically.
    Automatic Cord 
    Rewind Button
    CAUTION:   Be careful to avoid injury as 
    cord retracts very quickly.  
    						
    							Power button
    Turn the power ON or OFF by pressing 
    lightly downward on the power button 
    (   ).
    Variable suction power control
    The variable suction power control is 
    located on the back of the vacuum. 
    Turn the control toward the larger dots 
    for maximum suction. Turn the control 
    toward the smaller dots to minimize 
    suction for lightly soiled areas or  
    delicate fabrics.
    Air flow regulator
    Open the air flow regulator by sliding the 
    regulator back towards the handle to an 
    open position. This will reduce the suction 
    power for vacuuming delicate fabrics.
    For full suction power, close the air  
    flow regulator by sliding the regulator 
    forward to the closed position. 
    www.bissell.com 7
    Operations
    CAUTION:   Before using your vacuum, 
    make sure that the dirt   
    container and all filters   
    (pre-motor and post-motor) 
    are in place. Do not operate 
    your vacuum without the dirt 
    container and filters.
    Variable Suction 
    Control Power 
     
    Button
    Tip:
    Use the variable 
    suction power 
    control and the 
    air flow regulator 
    to reduce air flow 
    as needed when 
    using the tools.
    Air Flow  
    Regulator  
    						
    							www.bissell.com 
    Operations
    8
    Special tools
    Your BISSELL Pet Hair Eraser™ is 
    not only a powerful carpet and rug 
    vacuum cleaner, it’s also a versatile 
    bare floor and above floor vacuum 
    cleaner when you select one of the 
    special tools.
    1. Floor Nozzle:
      Use to vacuum carpets, rugs and bare 
    floors.  Swivel head turns to get into 
    tight spaces and fits under cabinets.
    A.  To vacuum carpets and rugs, push the brush 
    switch to the carpet position.  This will pull 
    the brushes up into the floor nozzle.
    B.  To vacuum bare floors, push the brush  switch to the bare floor position.  This 
    will extend the brushes down from the 
    floor nozzle.
    2.  Upholstery tool: To vacuum rugs and 
    carpet surfaces, flip down the Pet Hair 
    Lifter until it clicks into place on the front 
    of the Pet Hair Eraser Floor Nozzle.  
    Then push the brush switch to the carpet 
    position to pull the brushes up into the 
    Pet Hair Eraser Floor Nozzle.
    3.  Crevice tool: Use the crevice tool in tight, 
    narrow spaces. 
    4.  Dusting brush: Use the dusting brush to 
    dust furniture, blinds, books, lamps, shelves 
    and baseboards.
    5.  Wide Pet TurborBrush
    ™ Tool: Use 
    rotating brush action for small, flat areas 
    such as cushions and beds.
    NOTE: 
    Press down gently and pull 
    toward you in a raking motion. To o  
    mush pressure will cause the brush 
    to stop rotating.
    6.  Pet Contour Tool
    ™ Use to reach into 
    corners and edges on stairs, plus arm-
    rests and other curved surfaces.  The 
    tool can be flipped to use in any direction.
    1A.
    1B.
    2.
    3.
    4. 5.
    Brush Down
    Brush Up
     NOTICE: This tool is designed 
    to remove pet hair from 
    upholstery or carpeted  
    surfaces. It should not  
    be used on pets.
    6.  
    						
    							www.bissell.com 9
    Maintenance and care
    Emptying the dirt container
    Empty the dirt container as soon as 
    the dirt reaches the “FULL” lines on 
    the sides of the dirt container.
    1. Unplug the vacuum from the electrical 
    outlet.
    2.  Press the dirt container release button 
    located on the back of the carry handle 
    and lift up to remove.
    3.  Choose an emptying method. Method 
    #2 is recommended for allergy sufferers.
    Method #1 – Hold the dirt container over  a trash can and push the emptying  
    button located on the back bottom of 
    the dirt container to open the bottom 
    door. Close the door after the dirt  
    empties and make sure it clicks back 
    into the locked position.
    Method #2 – Place a plastic bag over   the bottom of the dirt container. Push  
    the emptying button, located on the 
    back bottom of the dirt container, 
    through the plastic to open the bottom 
    door. After the dust settles, remove the 
    plastic bag to discard. Close the door 
    and make sure it clicks back into the 
    locked position.  
     
    Filters protect the motor from 
    dirt and dust particles. Use only 
    BISSELL replacement filters in your 
    Pet Hair Eraser.
    1. Unplug the vacuum from the electrical outlet.
    2.  Remove the dirt container from the vacuum.
    3.  Remove the top portion of the dirt   
    container by grasping the carry handle 
    and turning counter clockwise and pull-
    ing up and out of the dirt container.
    WARNING:   
    To reduce the risk of electric  
    shock, turn power switch OFF and 
    disconnect plug from electrical  
    outlet before performing  
    maintenance or troubleshooting 
    checks.
    2.
    3.
    Dirt Container 
    Release Button
    Emptying 
    Button
    Cleaning the inner cyclone & screen  
    3.  
    						
    							www.bissell.com 
    Maintenance and care
    10
     
    4. Remove the inner cyclone by grasping the 
    bottom of the cyclone and turning clockwise 
    to unlock. Pull straight down to remove. Clean 
    with a cloth to remove dust and debris
    5.  Remove the screen by pulling straight 
    down. Clean with a cloth or a soft brush to 
    remove dust and debris.
    6.  The tank may also be wiped clean with a 
    damp cloth. Make sure the tank is   
    completely dry before reassembling.
    7.  To reassemble, hold the carry handle and 
    place the screen back onto the top portion 
    of the dirt container. Be sure to align the 
    notch on the top with the insert on the flat 
    edge of the screen. Then place the inner 
    cyclone back into the screen by aligning 
    the notches at the top of the inner cyclone 
    with the inserts inside the screen and turning 
    counter clockwise to lock into place. 
    8.  Place the top portion back onto the dirt 
    container by grasping the carry handle 
    and turning clockwise to lock into place. 
    Be sure that the dirt container release   
    button is aligned with the emptying button 
    when locked into place.
    Cleaning the pre-motor filter
    The pre-motor filter protects the motor 
    from dirt and dust particles. Use only 
    BISSELL replacement filters in your   
    Pet Hair Eraser.
    1.  Turn the power OFF. Unplug the vacuum 
    from the electrical outlet.
    2.  Remove the dirt container from the vacuum.
    3.  The pre-motor filter is located behind the 
    door labeled “FILTER” on the main body 
    of the vacuum. Open the door by pushing 
    up on the tab at the bottom of the door 
    and pulling out to remove.
    4.  Remove the filter tray by pulling up on the 
    tab of the tray. Remove the pre-motor filter 
    and set aside. Tap the tray gently over a 
    trash can to remove any dirt or debris.
     NOTICE: This product is intended for household 
    use only and not for commercial or 
    industrial use. Vacuuming of dust from 
    products like plaster, concrete or ashes 
    will damage the motor and void the  
    warranty.
    Filter Tray Pre-Motor Filter
    3.
    4.
    Cleaning the inner cyclone & screen continued
    4.
    5.  
    						
    All Bissell manuals Comments (0)

    Related Manuals for Bisell Pet Hair Eraser 42H5 User Manual