Bisell HealthyHome Pet Clean 37E3E User Manual

							w w w . b i s s e l l . \f o m 11
operations
Ready Tools™ continued 
9.  Clean by press\bng the tr\bgger to spray 
solu t\bon onto the area to be cleaned. Slowly 
move the tool back and forth over the so\bled 
surface. Release the tr\bgger to suct\bon d\brty 
water. Cont\bnue to clean \bn the area, work -
\bng \bn small sect\bons, unt\bl d\brt \bs removed.   
Caution: Do Not Overwet.
10.  When f\bn\bshed clean\bng, remove and r\bnse 
tool(s) \bn clean, runn\bng water.  
11.  It \bs recommended that you suct\bon clean 
water from a bowl to r\bnse out the hose. 
12.  Before wrapp\bng hose onto tool rack, l\bft  end 
of hose and stretch out to ensure all water \bs 
cleared from hose.
13.  Wrap flex hose around tool rack. 
14.  Empty 2-\bn-1 water tank and r\bnse out, 
follow\bng \bnstruct\bons on pages 9 through 
10.
15.  If the ReadyTools d\bal becomes d\bff\bcult to 
turn, the d\bverter assembly that holds the 
d\bal may need to be cleaned. To clean, 
f\brst remove nozzle and locate screw that 
holds the d\bverter assembly \bn place. W\bth a 
Ph\bll\bps screwdr\bver, remove the screw and 
set as\bde.
1\b.  Remove d\bverter assembly; hold under  run-
n\bng water mak\bng sure water flows through 
and around the d\bal. Turn the d\bal about 10 
t\bmes clockw\bse and 10 more t\bmes counter 
clockw\bse. Th\bs should free up any debr\bs.
17.  W\bpe d\bverter assembly w\bth a soft cloth and 
replace back on mach\bne. Replace nozzle.
1 8.  Return ReadyTools d\bal to 
FLOOR CLEANING sett\bng.
15. 12.
1\b.
S\brew Run water through here
11.    
						

							w w w . b i s s e l l . \f o m 12
Maintenance and care
Machine care
For best results, a few simple steps can 
assure your machine is well maintained 
after your cleaning is complete.
1. Turn power sw\btch OFF. \fnplug the mach\bne 
and wrap the power cord. 
2.   After empty\bng the 2-\bn-1 water tank, r\bnse 
\bt w\bth runn\bng hot tap water, tak\bng care 
to clean underneath and around the heavy 
duty bladder. Clean out red l\bnt screen. 
Removable nozzle may be r\bnsed \bf neces -
sary. Refer to page 9.
3.   Replace the 2-\bn-1 water tank on the mach\bne.
4.   Any loose ha\br or debr\bs can be pulled from 
the brush roll and thrown away.  
5.   To clean attachments, remove from hose and 
r\bnse \bn clean, runn\bng water. Dry before 
stor\bng. Clean the hose by suct\bon\bng clean 
water from a bowl. Before wrapp\bng back 
on mach\bne, l\bft end of hose and stretch out 
to ensure all water \bs cleared from hose. 
Refer to page 11, \bllustrat\bons 11 and 12.  
\b.   W\bpe the mach\bne’s exter\bor w\bth a soft cloth.
7.   After carpet \bs dry, vacuum aga\bn to remove 
ha\br and fuzz.
Machine storage
Put the unit away in a closet or base -
ment for the next use. Store cleaner in 
a protected, dry area. Since this product 
uses water, it must not be stored where 
there is a danger of freezing. Freezing 
will damage internal components and 
void the warranty.  
						

							w w w . b i s s e l l . \f o m 13
TroubleshootingWARNING: To reduce the r\bsk of f\bre, electr\bc shock or \bnjury, unplug from the outlet before serv\bc\bng.Reduced Spray OR No Spray
Possible causes  Remedies
1.	 Bladder	may	be	empty	 1.	 Turn	power 	\fwitch 	\bFF; 	Refill 	bladder	 	
		 	 with	clean 	hot	tap	water.
2.	 2-in-1 	tank	may	not	be	\feated 	properly.	 2.	 Turn	power	\fwitch	\bFF;	remove 	tank		
		 	 and	re\feat	tank\f.	
3.	 	Pump 	may	have 	lo\ft	prime.	 3.	 Turn	power	\fwitch	\bFF;	after 	1	minute	 	
		 	 turn	\bN 	and 	depre\f\f 	\fpray 	relea\fe 	trigger.
4.	 The 	pump	belt	may 	be	broken.	 4.	 Turn	power	\fwitch	\bFF	and 	unplug 	from	the	outlet. 	To 		
		 	 check	if 	a 	pump 	belt 	ha\f 	broken, 	you	will	need 	a	flat 			
		 	 head	\fcrewdriver.	 	 	
	 		 	A. In\fert 	the	blade 	end	into 	the	\flot 	of	the 	belt 	acce\f\f 		
		 	 door	to	relea\fe. 	Examine 	the	belt 	for	breakage. 	You		
		 	 \fhould	be 	able 	to 	\fee 	the 	pump 	belt 	looped 	around 	the 		
		 	 motor	\fhaft. 	If	it	i\f 	broken 	or	mi\f\fing, 	plea\fe 	refer 	to	 	
		 	 Replacement	Part\f 	on 	page 	14. 		A 	replacement 	belt 	may 		
		 	 be	ordered 	by 	calling 	BISSELL 	Con\fumer 	Service\f	 	
		 	 Complete	in\ftallation	in\ftruction\f 	will 	accompany 	the		
		 	 replacement	belt.		
		 	B.	When 	replacing 	belt 	acce\f\f 	door 	be 	\fure 	to 	line 	up 			
		 	 \flot\f	of 	belt 	acce\f\f 	door 	with 	\flot\f 	in 	machine,	 	
		 	 \flide	door 	into 	place 	and 	\fnap 	\fhut.
DirtLifter PowerBrush Does Not Turn
Possible causes   Remedies1.	 The	bru\fh	belt	or	pump 	belt	i\f	off 	or	broken.	 1.	 Refer	to	Remedy 	4	above 	to	check 	if	bru\fh	
		 	 belt	or	pump 	belt	i\f	broken.
Cleaner Not Picking Up Solution
Possible cause   Remedies1.	 ReadyTool\f	dial	may	 be	on	 the	 wrong	 \fetting	 1.	 Set	ReadyTool\f 	dial 	to 	either 	FL\b\bR 	CLEANING	 or	
	 	 	 T\b\bLS.for	the	cleaning	 job.	
2.	 Poor 	tool 	po\fition. 	(Hand 	held 	attachment\f 	only).	 2.	 Adju\ft	angle; 	apply 	more 	downward 	pre\f\fure.
3.	 Removable 	nozzle	may	not	be	properly 	attached.	 3.	 Make	\fure	nozzle	 i\f	on	 correctly	 by	\flightly	 rai\fing	
	 	 	 front	of	machine	 to	line	 up	\flot\f	 on	the	 ba\fe	 of		
	 	 	 the	machine	 with	the	hook\f	 on	nozzle.	 Attach	at		
	 	 	 ba\fe	fir\ft	and	then	 click	nozzle	 into	place.	 Refer	to		
	 	 	 image	5	on	 page	 9.
4.	 2-in-1 	tank	lid	i\f	not 	properly 	in\ftalled.	 4.	 Re-in\ftall	lid;	refer 	to	the 	image 	on	page 	8.	
5.	 2-in-1 	tank	i\f	not 	properly 	\feated.	 5.	 2-in-1	tank 	mu\ft 	be 	firmly 	\feated 	to 	function;	
	 	 		remove 	and	re\feat 	2-in-1 	tank.	
6.	 2-in-1 	tank	ha\f	picked 	up	maximum 	dirty	water.	 6.	 Empty	2-in-1	tank	and	refill, 	refer	to	the	 	
	 	 	 \bperation	\fection.
7.	 The 	lint	\fcreen 	may	be	clogged	 7.	 Clean	out	lint	\fcreen. 	Refer	to	page 	9.
Other maintenance or service not included in the manual should be   
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.             
Slots
B.
Pump Belt
A.    
						

							w w w . b i s s e l l . \f o m 14
Replacement parts
accessories
\btem Part no.  Part name
 1  203-0104  Tank Assembly Complete
 2  203-0102  Tank Base
 3  203-0124  Removable Nozzle
 4  215-0628  Replacement Pump Belt (w\bth \bnstruct\bons)
 5  015-0621  Replacement Brush Belt (w\bth \bnstruct\bons)
 6  203-0105  L\bnt Screen
\f 5
2 6
\b 4
While not all of these parts may not have come with your machine, all are 
available to you for purchase, if desired.
\btem  Part no.  Part name
 1  203-0149  Hard Floor Tool
 2  203-6651  3" Tough Sta\bn Tool
 3  203-6653  4" \fpholstery Tool
 4  203-6654  6" Sta\br Tool
 5  203-6652  Powered TurboBrush Hand Tool
 6  203-0116  Spray\bng, Sl\bd\bng Crev\bce tool w/ Brush
 7  203-6655  Spray\bng Crev\bce Tool
 8  210-3040  Mesh Tool Storage Bag
 9  62E5-E  709 mL BISSELL 2X F\bbre Cleans\bng Advanced Formula
10  89Q5-E  709 mL BISSELL 2X Mult\b-Allergen Advanced Formula
11  99K5-E  709 mL BISSELL 2X Pet Sta\bn & Odor  Advanced Formula
12  83P3-E  709 mL BISSELL 2X Natural Orange  Advanced Formula
13  34B5-E  709 mL BISSELL 2X Lavender Essence  Advanced Formula
14  56L9-E  473 mL BISSELL 2X Hard Floor Solut\bons 
15  0400-E  651 mL Tough Sta\bn Precleaner   
56
2
\f \b
7 4
8
11 12
13 9
14 10
15  
						

							w w w . b i s s e l l . \f o m 15
Warrant\f - B\bSSELL Health\f Home Pet Clean™
 Th\bs warranty g\bves you spec\bf\bc legal r\bghts, and you may also have other r\bghts wh\bch may 
vary from country to country. If you need add\bt\bonal \bnstruct\bon regard\bng th\bs warranty or have 
quest\bons regard\bng what \bt may cover, please contact BISSELL Consumer Serv\bces by   
telephone, or regular post as descr\bbed below, or contact your local \bn country d\bstr\bbutor.
Limited Two Year Warranty
  Subject to the *EXCEPTIONS AND EXCL\fSIONS \bdent\bf\bed below,  BISSELL Homecare, Inc., 
w\bll replace (w\bth new or remanufactured components), at BISSELL’s opt\bon, free of charge 
from the date of purchase by the or\bg\bnal purchaser, for two years any defect\bve or   
malfunct\bon\bng part do to manufacturers defect. 
  Th\bs warranty appl\bes to product used for personal, and not commerc\bal or rental serv\bce. Th\bs 
warranty does not apply to fans or rout\bne ma\bntenance components such as f\blters, belts, or 
brushes. Damage or malfunct\bon caused by negl\bgence, abuse, or use not \bn accordance w\bth 
the \fser’s Gu\bde \bs not covered.
BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQ\fENTIAL   
DAMAGES OF ANY NAT\fRE ASSOCIATED WITH THE \fSE OF THIS PROD\fCT.   
BISSELL’S LIABILITY WILL NOT EXCEED THE P\fRCHASE PRICE OF THE PROD\fCT. 
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCL\fSIVE AND IN LIE\f OF ANY OTHER WARRANTIES EITHER ORAL OR 
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCL\fDING 
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTIC\fLAR P\fRPOSE, ARE 
LIMITED TO THE TWO YEAR D\fRATION FROM THE DATE OF P\fRCHASE AS DESCRIBED ABOVE.
For UK inquiries:
Monday - Thursday     9 am — 5 pm 
Fr\bday      9 am — 4 pm 
BISSELL Homecare (Overseas)
The Boat Yard 
105 Stra\bght Road 
Old W\bndsor 
Berksh\bre, SL4 2SE 
\fn\bted K\bngdom 
Telephone: 0844-888-6644  For all other inquiries:
Monday - Fr\bday 
   8 am — 4 pm 
BISSELL Homecare, Inc.
PO Box 1888
Grand Rap\bds, M\bch\bgan 49501 \fSA
Telephone: 01-616-453-4451   
Fax: 01-616-453-1383    
						

							w w w . b i s s e l l . \f o m 16
If your BISSELL product should require service:Call BISSELL Consumer Serv\bces at the numbers below and we w\bll g\bve you the locat\bon of a 
BISSELL Author\bzed Serv\bce Center \bn your area. If you have quest\bons about your warranty or 
need replacement parts please contact the numbers below.
Or visit the BISSELL website -  www.bissell.com
When \bonta\bting BISSELL, have model number of \bleaner available.
Please re\bord your Model Number: __________________\2_
Please re\bord your Pur\bhase Date:  __________________\2_
NOTE: Please keep your original sales receipt. It   
provides proof of purchase date in the event of a   
warranty claim. See Warranty on page 15 for details.  
For UK inquiries:
Monday - Thursday     9 am — 5 pm 
Fr\bday      9 am — 4 pm 
BISSELL Homecare (Overseas)
The Boat Yard 
105 Stra\bght Road 
Old W\bndsor 
Berksh\bre, SL4 2SE 
\fn\bted K\bngdom 
Telephone: 0844-888-6644  For all other inquiries:
Monday - Fr\bday 
   8 am — 4 pm 
BISSELL Homecare, Inc.
PO Box 1888
Grand Rap\bds, M\bch\bgan 49501 \fSA
Telephone: 01-616-453-4451   
Fax: 01-616-453-1383
B\bSSELL consumer services
©2010 BISSELL Homecare, Inc
Grand Rap\bds, M\bch\bgan
All r\bghts reserved. Pr\bnted \bn Ch\bna
Part Number 120-4290
Rev 10/10
V\bs\bt our webs\bte at:
www.b\bssell.com
Scotchgard \bs a trademark of 3M
M\bcroban
® \bs a reg\bstered trademark 
of M\bcroban Products Company