Bisell CleanView Ultimate Pet 59M5E User Manual
Have a look at the manual Bisell CleanView Ultimate Pet 59M5E User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 201 Bissell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2Thank You USER'S GUIDE 59M5 SERIES 220-240V Safety Instructions Product View Assembly Operations Maintenance and Care TroubleshootingReplacement Parts3 4 5 6-9 10-12 13 14 Warranty Consumer Services15 16
www.bissell.com Thanks for buying a BISSELL Cleanview™ Pet Ultimate We’re glad you purchased a BISSELL bagged cylinder vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL bagged cylinder vacuum is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL bagged cylinder vacuum. Thanks again, from all of us at BISSELL. Mark J. Bissell Chairman, President & CEO 2
www.bissell.com IMPORTANT SAFETY INSTRUCTIONS 3 When using an electrical appliance, basic precautions should be observed, including the following: REAd ALL INSTRUCTIONS BEFORE USIN g YOUR CYLINdER VACUUM. WARNIN g: To reduce the risk of fire, electric shock, or injury: ■ Unplug from outlet when not in use ■ Use indoors only. ■ For dry pick up only. ■ Do not leave machine when it is plugged in. ■ Do not use with damaged cord or plug. ■ If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service agent. ■ Do not handle unit with wet hands. ■ Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces. ■ Do not unplug by pulling on cord. Unplug by grasping plug. ■ Do not run appliance over cord. ■ Do not handle plug or appliance with wet hands. ■ Do not expose hair, loose clothing, fingers or body parts to openings or moving parts. ■ Do not pick up hot or burning objects such as cigarettes, matches, or hot ashes. ■ Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapour. ■ Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours. ■ Not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety ■ Young children should be supervised to ensure that they do not play with the appliance. ■ Remove plug from electrical outlet before cleaning or maintaining the appliance. ■ If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard. ■ Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.). ■ Do not use for any purpose other than described in this User’s Guide. ■ Use only manufacturer’s recommended attachments. ■ Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. ■ Keep appliance on a level surface. ■ Turn off all controls before unplugging. ■ Be extra careful when cleaning stairs. ■ This appliance is provided with double insulation. Use only identical replacement parts. ■ Do not use without the dirt cup and filters in place. ■ Pay close attention when working around children. ■ Unplug before attaching TurboBrush™ tool SAVE THESE INSTRUCTIONS FOR FUTURE USE This model is for household use only. IMPORTANT FOR OPERATION ON A 220-240 VOLT A.C. 50 Hz POWER SUPPLY ONLY. If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. (Spares may be obtained from your BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a mains socket.
www.bissell.com 4 Product view CAUTION: Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. *The Filter Media, not the vacuum as a whole, complies with the High Efficiency Particulate Air (HEPA) filter specification (EN 1822-1:2009). Handle Telescoping Extension Wand Air Flow Regulator Automatic Cord Rewind Butto n Brush SwitchPet Hair Lifter Power Button Bag Change Indicato r Variable Suction Power Control Post-Motor HEPA Media Filter* Carry Handle Multi-Surface Floor Nozzle Swivel Hose Flex Hose Pet Tool Adaptor Combination Crevice Tool/ Dusting Brush Pet TurboBrush ™ Tool Pet Contour Tool ™Accessory Bag
www.bissell.com Assembly Assembling your vacuum 1. Connect swivel hose by squeezing both locking buttons and inserting it into the suction opening on the canister. Once the swivel hose is inserted in the suction opening, release the locking buttons. 2. Connect telescoping extension wand to the handle end of the flex hose. Twist slightly to tighten. 3. Attach the tool holder to the telescoping extension wand and insert the tools into the holder. 4. Connect floor nozzle to the end of the telescoping extension wand. Twist slightly to tighten. 5. Once assembled, you can store your vacuum in one of two positions: Storing in the in-use position 1. To store with the floor nozzle attached, insert the storage clip (located on the back of the floor nozzle) into the storage slot on the rear of the vacuum. 2. To store without the floor nozzle attached, insert the storage clip (located on the bottom of the telescoping extension wand) into the storage slot on the rear of the vacuum. Storing in the upright position 1. To store with the floor nozzle attached, stand the vacuum in the upright position and insert the storage clip (located on the back of the floor nozzle) into the storage slot on the bottom of the vacuum. 2. To store without the floor nozzle attached, stand the vacuum in the upright position and insert the storage clip (located on the bottom of the telescoping extension wand) into the stor - age slot on the bottom of the vacuum. WARNING: Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children. 5 1. 3. 2. B2. A1. Storing in the in-use position Storing in the upright position B1. A2.
www.bissell.com Operations 6 Power cord The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indi- cates the end of the usable cord. Do not pull the power cord out beyond the red line. Automatic cord rewind Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF and grasp the plug to disconnect from the electri- cal outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically. Power button Turn the power on or off by pressing lightly downward on the power button. Power Button CAUTION: Be careful to avoid injury as cord retracts very quickly. CAUTION: Before using your vacuum, make sure that the dust bag and all filters (pre-motor and post-motor) are in place. Do not operate your vacuum without the dust bag and filters. Automatic Cord Rewind Button
www.bissell.com 7 Operations Your BISSELL Cleanview Pet Ultimate is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools. Pet Tool Adapter: The Pet Tool Adapter must be attached to the handle end of the flex hose to use the Pet Contour Tool and the Wide Pet TurboBrush. The narrow end of the adapter attaches to the handle end of the flex hose and the wide end of the adapter attaches to the pet tool of your choice. The adapter should fit snugly to the hose and pet tool without using excessive force. Pet Contour Tool: Use to reach into corners and edges on stairs, as well as armrests and other curved surfaces. The tool can be flipped to use in any direction. TurboBrush Pet tool: Use rotating brush action for small areas such as stairs, upholstery and pet beds. NOTE: Press gently when using the TurboBrush Pet tool to gain maximum cleaning. Too much pressure will cause the brush to stop rotating. Two types of cleaning tools in one attachment. 1. Rotate brush portion up to use as a crevice tool to vacuum in tight, narrow spaces. 2. Rotate brush portion down to use as a dusting brush to dust furniture, blinds, books, lamps, shelves and baseboards Tip Before cleaning under low furniture, check area first for objects that might harm the unit or block the hose . Combination Crevice Tool/Dusting Brush:
www.bissell.com Operations 8 Pet Hair Eraser Floor Nozzle Use to pick up pet hair from rugs and carpeted surfaces. Just vacuum like you normally would. The Pet Hair Lifter will grab pet hair when you pull back and it will release the hair and suction it up when you push forward. NOTE: Turn the vacuum off before you flip up or flip down the Pet Hair Lifter. 1. To vacuum rugs and carpeted surfaces, flip down the Pet Hair Lifter until it clicks into place on the front of the Pet Hair Eraser Floor Nozzle. Then push the brush switch to the carpet position to pull the brushes up into the Pet Hair Eraser Floor Nozzle. 2. To vacuum bare floors, push the brush switch to the bare floor position to extend the brushes down from the Pet Hair Eraser Floor Nozzle. Then flip up the Pet Hair Lifter by pushing the yellow release button. This will flip the Pet Hair Lifter up and out of the way. 1. Brush Up Tip: Hair, string and small objects can block the hose and tools. Check them occasionally for obstructions. Notice: These tools are designed to remove pet hair from upholstered or carpeted surfaces. They should not be used on pets. 2. Brush Down Release Button
www.bissell.com 9 Operations Variable suction power control The variable suction power control is located on the top of the vacuum. Slide the control toward the larger dots for maximum suction. Slide the control toward the smaller dots to minimize suction for lightly soiled areas or delicate fabrics. Air flow regulator Open the air flow regulator by sliding the regulator back towards the handle to an open position to reduce suction for delicate fabrics. Close the air flow regulator by sliding the regulator down to the closed position for full suction. High filtration dust bag The BISSELL Cleanview Pet Ultimate features a non-woven, high filtration dust bag that captures more fine dust than traditional paper dust bags, giving off less dust emissions. It also holds more fine dust particles, giving you longer lasting suction power. Bag change indicator The bag change indicator is located between the power button and the automatic cord rewind button. If the bag change indicator turns orange while you are vacuuming, the dust bag needs to be replaced. The dust bag may appear to be full or only partially full depending upon the type of debris picked up. Fine particles can block the airflow in the dust bag and reduce suction before the dust bag is full. If the bag change indicator remains orange, even after changing the dust bag, turn the vacuum off and check for a clog in the hose or tools. NOTE: The indicator may turn orange when using the tools due to the restricted airflow. This does not necessarily mean that the dust bag is full. If the indicator does not turn off once the tool is removed, check for a clog in the hose/tools or replace the dust bag.
www.bissell.com Maintenance and care 10 WARNING: To reduce the risk of injury from moving parts, turn the power switch OFF and disconnect plug from electrical outletbefore performing maintenance or troubleshooting checks. Dust bag replacement 1. Unplug the vacuum from electrical outlet. 2. Open the dust bag compartment by lifting up on the latch on the door on the front of the vacuum. 3. Lift out the dust bag holder and dust bag. 4. Release the dust bag from the holder by pressing the dust bag holder clip and pulling the dust bag out of the holder. Discard the used dust bag. 5. Slide the new dust bag into the holder by inserting the dust bag into the tabs located at the bottom of the holder. Then press the dust bag holder clip, insert the dust bag and release the dust bag holder clip to hold the dust bag in place. 6. Place holder and new dust bag back into the dust bag compartment, mak- ing sure the entire bag is tucked in below the seal gasket. 7. Close dust bag compartment door and press down gently until it locks into place. NOTE: The dust bag compartment door will not close without the dust bag in place. 2. 3. 4.