Bisell CleanView Reach Carpet Cleaner 37Y8E User Manual

2Thank You
USER'S GUIDE
14U6, 37Y8 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
WarrantyTroubleshooting
Consumer Services3
4
5
6-10 11
15 12
16
Replacement Parts
Accessories13
14    

www.bissell.com 
Thanks for buying a BISSELL CleanView® Reach 
We’re glad you purchased a BISSELL CleanView® Reach. Everything 
we know about floor care went into the design and construction of 
this complete, high-tech home cleaning system.
Your BISSELL CleanView
® Reach is well made, and we back it with a   
limited two year warranty. We also stand behind it with a  
knowledgeable, dedicated Consumer Services department, so, 
should you ever have a problem, you’ll receive fast, considerate...

www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
REAd ALL INSTRUCTIONS  
BEFORE USIN g YOUR  
dEEP CLEANER. 
Always connect to a properly Earthed   
outlet. Unplug from outlet when not in use 
and before conducting maintenance or 
troubleshooting.  
   WARNIN g: To  
reduce the risk of fire, 
electric shock, or injury:
 ■  Use indoors only
■ Do not immerse; use only on surfaces 
moistened by cleaning...

Removable 
Nozzle
www.bissell.com 4
Product view
WARNING: To reduce the risk of fire and 
electric shock due to internal 
component damage, use only 
BISSELL cleaning formulas 
intended for use with the   
deep cleaner. 
Tough Stain 
Tool
Spray Trigger
Power Cord Hose 
 
Wrap
Hose   
Collection 
Tank Latch
Cleaning formula:
Note: Additional BISSELL formula options may be available at your local \
retailer.
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protect 
whenever...

www.bissell.com 
Assembly 5
Your CleanView® Reach assembles 
quickly and easily. The only tool you 
will need for assembly is a Phillips 
head screwdriver.
1.  Slide upper body onto lower body.
2.  Secure with screws.
3.  Attach hose wrap to upper handle by 
sliding it up the bottom of the handle 
until it snaps firmly in place.
4.  Slide upper handle into upper body,  
until it will not go any further and  
secure with screw.
5.  Place solution tank on back of unit.
6.  Wrap power cord and flex hose.
7....

www.bissell.com 
Operations 
6
Special features
Your BISSELL CleanView® Reach is a 
home cleaning system that uses a 
combination of hand hot tap water, 
BISSELL cleaning formula, brush  
agitation and suction to safely clean 
carpets.
DirtLifter
™ Powerbrush
The DirtLifter PowerBrush is designed to 
enhance cleaning performance. The bristle pat-
tern safely lifts out the deep down dirt while 
gently grooming carpet fibers. The floating 
suspension self-adjusts to all carpet heights. 
When the power is...

www.bissell.com 7
Operations
4. Pre-Treating (optional) Pre-treat stub-
born stains and highly soiled carpet in 
hallways and other high-traffic areas.
4a.  Generously spray BISSELL Tough Stain 
Precleaner evenly over soiled area.  
Caution: DO NOT OVER WET CARPET
4b.  Wait 3-5 minutes before deep cleaning.
Fill the tank
1. Remove the solution tank by lifting it straight 
up, then away from the lower body.
2.  Unscrew the black cap at the bottom of 
the solution tank.
3.  Fill with hand hot tap water to...

www.bissell.com 
Operations
8
 2a. Release collection tank latches (on 
each side) by pulling up from the bottom 
of latch and then out. 
 2b.  Carefully remove the top of the tank 
by lifting up on the tank handle.  
3.  Carry collection tank to a toilet or sink. To 
empty, pour out contents using opening at 
back of tank.
4.  Rinse collection tank thoroughly and replace 
on unit.
5.  Refill solution tank and continue cleaning.
Cleaning with Attachments 
Your CleanView Reach is equipped with 
a hose and...

www.bissell.com 9
Operations
6. Clean by pressing the spray trigger 
to spray solution onto the area to be 
cleaned. Slowly move the tool back and 
forth over the soiled surface. Release 
the spray trigger to suction dirty water. 
Continue to clean in the area, working 
in small sections, until dirt is removed.
  Caution: Do Not Overwet.
7.  When finished cleaning, remove and 
rinse tool(s) in clean, running water.
8.  It is recommended that you suction clean 
water from a bowl to rinse out the hose.
9....

www.bissell.com 
Operations
10
Hard floor cleaning
(Select models only)
1. Remove the collection tank (refer to steps 
2a and 2b on page 8).
2.  Attach the hard floor tool by hooking it 
into the front of the removable nozzle and 
rotate until it snaps firmly in place.
3.  Replace the collection tank. Be sure to 
attach the two latches.
4.  Fill the solution tank with warm tap water 
to the WATER fill line. Fill the rest with 
BISSELL 2X Hard Floor Solutions™ to 
FORMULA fill line. 
5.  Follow steps 1-8...