Bisell CleanView QuickWash Carpet Cleaner 90D3E User Manual

							USER'S GUIDE
90D3 SERIES 220-240V
2Thank You
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingReplacement Parts
3
4
5
5-7
8
9
10
Warranty
Consumer Services11
12    
						

							www.bissell.com 
Thanks for buying a BISSELL CleanView® QuickWash 
We’re glad you purchased a BISSELL CleanView® QuickWash. 
Everything we know about floor care went into the design and  
construction of this complete, high-tech home cleaning system.
Your BISSELL CleanView® QuickWash is well made, and we back 
it with a limited two year warranty. We also stand behind it with 
a knowledgeable, dedicated Consumer Services department, so, 
should you ever have a problem, you’ll receive fast, considerate 
assistance.
My great-grandfather invented the floor sweeper in 1876. Today, 
BISSELL is a global leader in the design, manufacture, and   
service of high quality homecare products like your BISSELL   
CleanView® QuickWash.
Thanks again, from all of us at BISSELL.
Mark J. Bissell 
Chairman, President & CEO
 2  
						

							When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
Read all instRuctions 
befoRe using youR deep 
cleaneR.
   WaRning  - 
to reduce the risk of 
fire, electric shock, or 
injury:
  
■  Use indoors only.
■ Do not immerse
■  Use only on surfaces moistened by  
cleaning process
■ Do not leave machine when it is 
plugged in
■ Do not service machine when it is 
plugged in
■ If the supply cord is damaged, it must 
be replaced by the manufacturer or its 
service agent in order to avoid a hazard
■ Do not use machine if it has been 
dropped, damaged, left outdoors or 
dropped into water
■ Do not expose to rain, store indoors 
■ Do not pull or carry by cord, use cord as 
a handle, close door on cord, pull cord 
around sharp corners or edges, run 
appliance over cord, or expose cord to 
heated surfaces
■ Do not carry the appliance while in use
■ Do not unplug by pulling on cord. 
Unplug by grasping plug not the cord
■ Do not handle plug or appliance with 
wet hands
■ Do not put any object into appliance 
openings, use with blocked opening, or 
restrict air flow
■ Do not expose hair, loose clothing, fingers 
or body parts to openings or moving parts
■ Do not pick up hot or burning objects
■ Do not pick up flammable or com-
bustible materials (lighter fluid, petrol, 
kerosene, etc.) or use in the presence of 
explosive liquids or vapour
■ Do not use appliance in an enclosed space 
filled with vapours given off by oil base 
paint, paint thinner, some moth proofing 
substances, flammable dust, or other   
explosive or toxic vapours
■  Remove plug from electrical outlet before 
cleaning or maintaining the appliance
■  Not intended for use by persons (including 
children) with reduced physical, sensory or 
mental capabilities, or lack of experience 
and knowledge,unless they have been 
given supervision or instruction concerning 
use of the appliance by a person respon-
sible for their safety.
■ Young children should be supervised 
to ensure that they do not play with the 
appliance
■ Do not pick up toxic material (chlorine 
bleach, ammonia, drain cleaner, petrol, etc.)
■ Do not modify the Earthed plug
■ Do not allow to be used as a toy
■ Do not use for any purpose other than 
described in this User’s Guide
■ Use only manufacturer’s recommended  
attachments
■ Use only cleaning products formulated 
by BISSELL for use in this appliance to 
prevent internal component damage
■ Keep openings free of dust, lint, hair, etc.
■ Keep appliance on a level surface
■ Turn off all controls before unplugging
■ Be extra careful when cleaning stairs
■ Pay close attention when working  
around children
sa Ve tHese   
instRuctions  
ThIS moDEL IS foR hoUSEhoLD USE oNLY .
 W aRning:  This appliance must be earthed.
iMpoRtant foR 
oPERATIoN oN A 220/240 VoLT A.C. 
50/60 hz PoWER SUPPLY oNLY. 
If your appliance is fitted with a nonrewireable 
BS 1363 plug it must not be used unless a 13 
amp (ASTA approved to BS 1362) fuse is fit-
ted in the carrier contained in the plug. Spares 
may be obtained from your BISSELL supplier. 
If for any reason the plug is cut off, it must be 
disposed of, as it is an electric shock hazard 
should it be inserted into a 13 amp socket. 
www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3  
						

							www.bissell.com 4
Product view
Spray TriggerClean Water/
Solution Tank Large Easy 
Rolling 
Wheels
Power 
Switch
Detent Lever Quick Release 
Cord Wrap
™Power 
Cord
Lower Cord 
Wrap
Handle 
Assembly
Upper 
Body Lower 
Body Vent Cover 
(Containing 
Foam Filter)
Collection 
Tank Collection 
Tank Latch
Removable 
Nozzle
W aRning:   To reduce the risk of fire and electric shock due to internal compo-
nent damage, use only BISSELL cleaning formlas intended for use 
with the deep cleaner. Non-BISSELL cleaning formulas may harm 
the machine and void the warranty.
cleaning formula 
note: additional bissell formula options may be available at your local retailer.
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protect 
whenever it fits your schedule. Always use genuine BISSELL deep cleaning\
   
formulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty.
651 mL  
Tough 
Stain 
Precleaner
#0400-e
473 mL 
 
2X Hard 
Floor 
Solutions
#56l9-e1.5 L 
2X Wash & 
Protect Pet 
Stain & Odour 
Formula w/ 
Scotchgard
™
Protector  
#66W9-E
1.5 L 
2X Wash 
& Protect 
Professional 
Formula w/ 
Scotchgard
™ 
 
Protector
#81L5-E 1.5 L 
2X Wash & 
Protect Fresh 
Fragrance 
Formula w/ 
Scotchgard™
Protector
 
#92F4-E  1.5 L 
 
2X Wash 
& Protect 
Spring Breeze 
Fragrance 
Formula w/ 
Scotchgard™
Protector  
#12W4-E 1.5 L 
 
2X Wash 
& Protect 
Lavender 
Fragrance 
Formula w/ 
Scotchgard
™
Protector  
#33D2-E     
						

							www.bissell.com 
Assembly 
1. Slide upper body into lower body. 
2. 
Secure with screws.
3. Slide handle assembly down into upper body 
until it will go no further. Align screw slots.
4. Secure with screw.
5. Place clean water/solution tank on back of unit.
special features
Microban™ antibacterial protection
Microban antibacterial protection helps prevent 
the growth of harmful common household   
bacteria including E. coli,  Salmonella and 
Staph. a. It helps to keep the unit fresher and 
cleaner between uses.
scotchgard™ protector
Carpet protection applied at the mill typically 
wears down over time from heavy foot traffic  
and everyday cleaning, including deep  
cleaning. To help restore this important  
protection, only BISSELL offers cleaning  
formulas with Scotchgard protector. This offers 
extra protection against dirt and tough stains 
to keep your carpets looking good longer. 
before you clean
1.  Remove easily moved furniture (chairs, 
lamps, coffee/cocktail tables, etc.) from 
room if needed.
2.  Vacuum carpet thoroughly.
3.  Decide where to begin. Plan to leave 
a path open to empty soiled water and 
refill cleaner.
note: carpeting will dry in three 
to four hours, depending on carpet 
style and air circulation in room. a 
floor fan speeds drying
5
0perations
1.
5.
3. 2.
4.
Tip:
Always vacuum 
thoroughly before 
you deep clean. 
If possible, move 
large furniture to 
an area you will 
not be cleaning.  
						

							www.bissell.com 
0perations
6
fill the tank
1. Remove the clean water/solution tank by 
lifting it straight up, then away from the 
lower body.
2.  Unscrew the black cap at the bottom of 
the clean water/solution tank.
3.  fill to the foRmULA line with BISSELL 2X  
cleaning formula. fill the rest of the tank 
with hand hot (not boiling) tap water to 
the water fill line. Replace and tighten the 
black cap.  
4.  Place clean water/solution tank on lower 
body.
5.  Rotate Quick Release Cord Wrap™ to 
release the power cord and plug into an 
outlet.
carpet cleaning
1. With your foot, press the red power 
switch [located in foot of unit] oN  .
2.  With foot, press the detent lever on left 
side of lower body.
3.  Depress spray trigger to spray cleaning 
solution.  do not overwet.
4.  To suction up water, repeat motion over same 
area without pressing the spray trigger.
5.  Repeat steps 3 and 4 until no more dirt 
can be removed.
6.  Continue to clean entire carpet, working 
in 1m x 1m sections.
7.  Empty the collection tank when dirty water 
reaches the full line, or when the clean 
water/solution tank is empty. 
8.  If floor nozzle stops spraying, turn power 
switch  off and check water and cleaning 
solution levels. Refill if needed.
Tip:
It is recommended  
that every time your 
clean water/solution 
tank needs refilling, 
that you empty the 
contents of the collec-
tion tank. If the collec-
tion tank gets too full, 
you may begin to see 
foam spitting out of 
the vent cover. If this 
happens empty the  
collection tank.
WaRning:
To reduce the risk of fire, use only 
BISSELL cleaning formulas for full 
size machines in your deep cleaner. 
Use of cleaning formulas that con-
tain lemon or pine oil may damage 
this appliance and void warranty. 
Chemical spot cleaners or solvent-
based soil removers should not be 
used. These products may react with 
the plastic materials used in your 
deep cleaner, causing cracking or 
pitting.
2.
Tip:
Deep cleaning spots, spills and high 
traffic areas on a regular basis can 
prolong carpet life.  
						

							www.bissell.com 7
0perations
empty collection tank
1. Turn power switch off and unplug power 
cord from outlet.
2.  Remove and empty collection tank.
a. Release collection tank latches [1 each 
side] by pulling up from bottom of latch 
and then out. 
b. Carefully remove collection tank from 
lower body by lifting handle. 
c. Carry collection tank to a toilet or sink. To 
empty, pour out contents using opening at 
back of tank.
d. Rinse collection tank thoroughly. 
e. Remove vent cover from top of collection 
tank by pulling the tab on top and pulling 
up.  Remove foam filter from vent cover.  
Rinse filter thoroughly and replace back 
into vent cover. Replace vent cover back 
into collection tank, making sure the tab 
clicks back into the locked position.
3. Remove lint and hair from red gasket in 
base of unit. (do not remove gasket)
4.  Clean nozzle window by lifting latch   
and removing from machine. Rinse under 
running water. When finished replace 
nozzle and secure with latch.
5.  Replace collection tank on base of unit and 
secure with latches.
3 4
2c. 2b.
2e.
2a.  
						

							www.bissell.com 
Maintenance and care
8
When your done
1. Turn power switch off .
2.  Unplug power cord from outlet.
3.  Remove and empty collection tank.
a. Release collection tank latches [1 each 
side] by pulling up from bottom of latch 
and then out. 
b. Carefully remove collection tank from 
lower body by lifting handle. 
c. Carry collection tank to a toilet or sink. 
To empty, pour out contents using open-
ing at back of tank.
d. Rinse collection tank thoroughly. 
e. Remove vent cover from top of collec-
tion tank by pulling the tab on top and 
pulling up.  Remove foam filter from 
vent cover.  Rinse filter thoroughly and 
replace back into vent cover. Replace 
vent cover back into collection tank, 
making sure the tab clicks back into the 
locked position.
4. Remove lint and hair from red gasket in 
base of unit. (do not remove gasket)
5.  Clean nozzle window by lifting latch and 
removing from machine. Rinse under run-
ning water. When finished replace nozzle 
and secure with latch.
6.  Replace collection tank on lower body 
and secure with latches.
7.  Wrap power cord around Quick Release 
Cord Wrap
™ on side of deep cleaner.
8.  Wipe all surfaces with a soft cloth. Store 
cleaner upright in a protected, dry area.
note: y ou may have cleaning solu-
tion remaining in the clean water/
solution tank. y ou may store your 
deep cleaner this way for the next 
cleaning task, but never keep soiled 
solution in the collection tank.
WARNING:   
To reduce the risk of injury 
from moving parts and/or   
electrical shock, turn power 
switch OFF and disconnect 
plug from electrical outlet 
before performing mainte-
nance or troubleshooting 
checks.
caution:   Do not store unit where 
freezing may occur. 
Damage to internal com-
ponents may result.  
						

							www.bissell.com 9
Troubleshooting
Reduced spray or no spray
possible cause Remedy
1. Clean water/solution tank empty  1. Refill tank with water  
      and formula
2.  Clean water/solution    2. Soak tank cap in warm   
  tank cap clogged    water and then rinse under   
       running water
deep cleaner not picking up cleaning solution
possible cause Remedy
1. Collection tank not aligned/secured  1. Check tank for proper alignment  
      and secure with side latches
2.  Collection tank full  2. Empty tank
3.  Removable nozzle installed improperly   3. Align four "hooks" into bottom  
      first, then snap into place on top
4.  Removable nozzle full of debris  4. Remove nozzle and rinse under  
      running water
5.  Red lint screen under collection tank clogged  5. Remove debris from lint screen
other maintenance or service not included in the manual should be   
performed by an authorized service representative.
thank you for selecting a bissell product.
please do not return this product to the store.
W aRning:   To reduce the risk of electric shock, or 
injury, unplug machine from outlet before 
servicing.  
						

							www.bissell.com 
Replacement parts
10
While not all of these parts may not have come with your machine, all 
are available to you for purchase, if desired.
Item Part No.  Part Name
 1  203-8121  handle Assembly
 2  203-5545  Cross Action Brush
 3  203-5573  Solution Tank (Includes Cap and Insert Assembly)
 4   203-8122  Collection Tank 
 5  203-5547  hard floor Tool
 6  203-5541  Solution Tank Cap and Insert Assembly
 7  203-5527  foam filter
2
6 3
7
4
1
5
cleaning formula: Refer to bottom of page 4 of this guide for a 
full selection of cleaning formula available for purchase.