Bisell CleanView QuickWash Carpet Cleaner 90D3E User Manual

USER'S GUIDE
90D3 SERIES 220-240V
2Thank You
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingReplacement Parts
3
4
5
5-7
8
9
10
Warranty
Consumer Services11
12    

www.bissell.com 
Thanks for buying a BISSELL CleanView® QuickWash 
We’re glad you purchased a BISSELL CleanView® QuickWash. 
Everything we know about floor care went into the design and  
construction of this complete, high-tech home cleaning system.
Your BISSELL CleanView® QuickWash is well made, and we back 
it with a limited two year warranty. We also stand behind it with 
a knowledgeable, dedicated Consumer Services department, so, 
should you ever have a problem, you’ll receive fast, considerate...

When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
Read all instRuctions 
befoRe using youR deep 
cleaneR.
   WaRning  - 
to reduce the risk of 
fire, electric shock, or 
injury:
  
■  Use indoors only.
■ Do not immerse
■  Use only on surfaces moistened by  
cleaning process
■ Do not leave machine when it is 
plugged in
■ Do not service machine when it is 
plugged in
■ If the supply cord is damaged, it must 
be replaced by the manufacturer or its...

www.bissell.com 4
Product view
Spray TriggerClean Water/
Solution Tank Large Easy 
Rolling 
Wheels
Power 
Switch
Detent Lever Quick Release 
Cord Wrap
™Power 
Cord
Lower Cord 
Wrap
Handle 
Assembly
Upper 
Body Lower 
Body Vent Cover 
(Containing 
Foam Filter)
Collection 
Tank Collection 
Tank Latch
Removable 
Nozzle
W aRning:   To reduce the risk of fire and electric shock due to internal compo-
nent damage, use only BISSELL cleaning formlas intended for use 
with the deep cleaner. Non-BISSELL cleaning...

www.bissell.com 
Assembly 
1. Slide upper body into lower body. 
2. 
Secure with screws.
3. Slide handle assembly down into upper body 
until it will go no further. Align screw slots.
4. Secure with screw.
5. Place clean water/solution tank on back of unit.
special features
Microban™ antibacterial protection
Microban antibacterial protection helps prevent 
the growth of harmful common household   
bacteria including E. coli,  Salmonella and 
Staph. a. It helps to keep the unit fresher and 
cleaner...

www.bissell.com 
0perations
6
fill the tank
1. Remove the clean water/solution tank by 
lifting it straight up, then away from the 
lower body.
2.  Unscrew the black cap at the bottom of 
the clean water/solution tank.
3.  fill to the foRmULA line with BISSELL 2X  
cleaning formula. fill the rest of the tank 
with hand hot (not boiling) tap water to 
the water fill line. Replace and tighten the 
black cap.  
4.  Place clean water/solution tank on lower 
body.
5.  Rotate Quick Release Cord Wrap™ to...

www.bissell.com 7
0perations
empty collection tank
1. Turn power switch off and unplug power 
cord from outlet.
2.  Remove and empty collection tank.
a. Release collection tank latches [1 each 
side] by pulling up from bottom of latch 
and then out. 
b. Carefully remove collection tank from 
lower body by lifting handle. 
c. Carry collection tank to a toilet or sink. To 
empty, pour out contents using opening at 
back of tank.
d. Rinse collection tank thoroughly. 
e. Remove vent cover from top of...

www.bissell.com 
Maintenance and care
8
When your done
1. Turn power switch off .
2.  Unplug power cord from outlet.
3.  Remove and empty collection tank.
a. Release collection tank latches [1 each 
side] by pulling up from bottom of latch 
and then out. 
b. Carefully remove collection tank from 
lower body by lifting handle. 
c. Carry collection tank to a toilet or sink. 
To empty, pour out contents using open-
ing at back of tank.
d. Rinse collection tank thoroughly. 
e. Remove vent cover from top of...

www.bissell.com 9
Troubleshooting
Reduced spray or no spray
possible cause Remedy
1. Clean water/solution tank empty  1. Refill tank with water  
      and formula
2.  Clean water/solution    2. Soak tank cap in warm   
  tank cap clogged    water and then rinse under   
       running water
deep cleaner not picking up cleaning solution
possible cause Remedy
1. Collection tank not aligned/secured  1. Check tank for proper alignment  
      and secure with side latches
2.  Collection tank full  2. Empty...

www.bissell.com 
Replacement parts
10
While not all of these parts may not have come with your machine, all 
are available to you for purchase, if desired.
Item Part No.  Part Name
 1  203-8121  handle Assembly
 2  203-5545  Cross Action Brush
 3  203-5573  Solution Tank (Includes Cap and Insert Assembly)
 4   203-8122  Collection Tank 
 5  203-5547  hard floor Tool
 6  203-5541  Solution Tank Cap and Insert Assembly
 7  203-5527  foam filter
2
6 3
7
4
1
5
cleaning formula: Refer to bottom of page 4 of...