Bisell CleanView PROheat 53U6E User Manual

2Thank You
USER'S GUIDE
53U6, 34T2 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingReplacement Parts3
4-5
6
7-14
14-15
16-17 18
Accessories and Formulas
Warranty
Consumer Care18
19
20    

Thanks for buying a BISSELL CleanView® ProHeat® deep cleaner
We’re glad you purchased a BISSELL CleanView® ProHeat® deep cleaner. 
Everything we know about floor care went into the design and  
construction of this complete, high-tech home cleaning system.
Your BISSELL deep cleaner is well made, and we back it with a limited 
two-year warranty. We also stand behind it with a knowledgeable,   
dedicated Consumer Care department, so, should you ever have a   
problem, you’ll receive fast, considerate...

www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
REAd ALL INSTRUCTIONS  
BEFORE USINg YOUR   
dEEP CLEANER. 
Always connect to a properly Earthed   
outlet. Unplug from outlet when not in use 
and before conducting maintenance or 
troubleshooting.  
   WARNINg: To  
reduce the risk of fire, 
electric shock, or injury:
 ■  Use indoors only
■ Do not immerse; use only on surfaces 
moistened by cleaning...

www.bissell.com 4
Product view
DirtLifter™ 
PowerBrush
Belt Access Door
ReadyTools
™ Dial
Removable Nozzle
Ergonomically 
Designed Handle
Handle Assembly
Lower Body Assembly Heater Switch: 
Turn heat on or off  
as needed
Edge Sweep™ Brushes Integrated Carry Handle
Heat Indicator  
Light/Built-in 
 
Hot Water Heater  

www.bissell.com 
Product view
5
Quick Release™  
Cord Wrap
Power Cord
Spray Trigger
WARNING: To reduce the risk of fire and 
 
electric shock due to internal 
component damage, use only 
BISSELL cleaning formulas 
intended for use with the deep 
cleaner.  Non-BISSELL cleaning 
formulas may harm the machine 
and void the warranty.
Large, Easy-To-
Maneuver Wheels
Ready-to-Use 
Hose
Hose Secure Latch
Handle Release Power Switch
2-in-1 Water Tank
™ 
 
Includes built in formula   
measuring cup
Cord Clip...

www.bissell.com 
Assembly
6
Your CleanView® ProHeat® deep cleaner comes 
in four easy to assemble components:
•	 Handle	 assembly
•	 Upper	 hose	rack
•	 Lower	 body	assembly
•	 Lower	 hose	rack
Four Phillips head screws are included, 2 long 
and 2 short. They can be found taped to the 
handle assembly.
The only tool you will need to assemble your 
cleaner is a Phillips head   
screwdriver.
1.  Slide handle assembly onto lower body 
and secure with two long screws.
2.  Attach upper hose rack to back of...

www.bissell.com 7
Operations
Special features
Your BISSELL CleanView® ProHeat® is a home 
cleaning system that uses a combination of heat, 
BISSELL cleaning formula, brush agitation and 
suction to safely clean carpets.
Built-In-Heater
BISSELL CleanView® ProHeat® models all fea-
ture a patented built-in heater which will heat 
the hand hot tap water you put in it to safely 
optimise cleaning effectiveness. The heater will 
never allow the temperature to exceed 82°C 
degrees. The heater switch, which is...

www.bissell.com 
Operations
8
Special features continued
Scotchgard
™ Protector
Carpet protection applied at the mill typically 
wears down over time from heavy foot traffic  
and everyday cleaning, including deep   
cleaning. To help restore this important   
protection, only BISSELL offers cleaning   
formulas with Scotchgard protector. This offers 
extra protection against dirt and tough stains 
to keep your carpets looking good longer. 
Measuring cup
Your deep cleaner is equipped with a   
measuring...

www.bissell.com 9
Operations
Before you clean continued
5. Pretreating (optional)
Pretreating is recommended to 
improve cleaning effectiveness   
for	 heavily	 soiled	carpet	 in	high 	
traffic	 areas	such	as	entry	 ways	
and	 hallways.
To pretreat: A.  Using the BISSELL Tough Stain  
Precleaner, generously spray evenly 
over soiled area, do not overwet.
B.  Wait 3-5 minutes before deep   
cleaning.
C.  Clean as normal using your BISSELL 
deep cleaner.
Fill	 the	 2-in-1	 water	tank
1. Remove the tank...

www.bissell.com 
Operations
10
Carpet cleaning
1. Plug the deep cleaner into a proper out-
let. Set ReadyTools dial to the FLOOR 
CLEANING setting. Turn the power on by 
pressing the red power switch on the back 
of the unit with your foot. Turn heater 
switch (located on side of unit) to the on 
position. Allow one minute for the built-in 
heater to warm up before cleaning. 
NOTE:	 The	CleanView® ProHeat®	will	
be	 fully	 warmed	 and	will	 
provide optimal performance  
after	 one	minute	 of	continuous...