Bisell CleanView LiftOff 10N4E User Manual

							2Thank You
USER'S GUIDE
10N4, 22K7 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingAccessories
Consumer Services3
4-5
6
7-12
13-15 16
17
20
Replacement Parts
Warranty18
19 
						

							www.bissell.com 
Thanks for buying a BISSELL CleanView® Lift-Off®
We’re glad you purchased a BISSELL CleanView® Lift-Off®. 
Everything we know about floor care went into the innovative 
design and construction of this complete, high-tech home cleaning 
system.
Your BISSELL CleanView
® Lift-Off® is well made, and we back it 
with a limited five year warranty. We also stand behind it with a  
knowledgeable, dedicated Consumer Services department, so, 
should you ever have a problem, you’ll receive fast, considerate 
assistance.
My great-grandfather invented the floor sweeper in 1876. Today, 
BISSELL is a global leader in the design, manufacture, and  
service of high quality homecare products like your BISSELL 
CleanView
® Lift-Off®.
Thanks again, from all of us at BISSELL.
Mark J. Bissell 
Chairman, President & CEO
 2  
						

							www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
REAd ALL INSTRUCTIONS  
BEFORE USIN g YOUR  
dEEP CLEANER. 
Always connect to a properly Earthed   
outlet. Unplug from outlet when not in use 
and before conducting maintenance or 
troubleshooting.  
   WARNIN g: To  
reduce the risk of fire, 
electric shock, or injury:
 ■  Use indoors only
■ Do not immerse; use only on surfaces 
moistened by cleaning process
■ Do not leave machine when it is plugged in
■ Do not service machine when it is plugged in
■  If the supply cord is damaged, it must 
be replaced by the manufacturer or its 
service agent in order to avoid a hazard
■ Do not use machine if it has been 
dropped, damaged, left outdoors or 
dropped into water
■ Do not pull or carry by cord, use cord as a 
handle, close door on cord, pull cord around 
sharp corners or edges, run appliance over 
cord, or expose cord to heated surfaces
■ Do not carry the appliance while in use
■ Do not unplug by pulling on cord; 
unplug by grasping plug not the cord
■ Do not handle plug or appliance with 
wet hands
■ Do not put any object into appliance openings,  
use with blocked opening or restrict air flow
■ Do not expose hair, loose clothing, fingers 
or body parts to openings or moving parts
■ Do not pick up hot or burning objects
■ Do not pick up flammable or combustible 
materials (lighter fluid, petrol, kerosene, 
etc.) or use in the presence of explosive 
liquids or vapours
■ Do not use appliance in an enclosed space 
filled with vapours given off by oil base 
paint, paint thinner, some moth proofing 
substances, flammable dust, or other   
explosive or toxic vapours
■  Remove plug from electrical outlet before 
cleaning or maintaining the appliance
■ Not intended for use by persons (including 
children) with reduced physical, sensory or 
mental capabilities, or lack of experience 
and knowledge, unless they have been 
given supervision or instruction concerning 
use of the appliance by a person respon-
sible for their safety
■ Young children should be supervised to ensure  
that they do not play with the appliance
■ Do not pick up toxic material (chlorine 
bleach, ammonia, drain cleaner, petrol, etc.)
■ Do not modify the Earthed plug
■ Do not use for any purpose other than 
described in this User’s Guide
■ Use only manufacturer’s recommended  
attachments
■ Use only cleaning products formulated 
by BISSELL for use in this appliance to 
prevent internal component damage
■ Keep openings free of dust, lint, hair, etc.
■ Keep appliance on a level surface
■ Turn off all controls before unplugging
■ Be extra careful when cleaning stairs
■ Pay close attention when working   
around children
SAVE THESE   
INSTRUCTIONS 
FOR FUTURE USE
This model is for household use only.
   WARNING:  This appliance must be Earthed.
IMPORTANT FOR OPERATION ON A 220-240 VOLT 
A.C. 50/60 Hz POWER SUPPLY ONLY. 
If your appliance is fitted with a   
nonrewireable BS 1363 plug it must not be 
used unless a 13 amp (ASTA approved to BS 
1362) fuse is fitted in the carrier contained 
in the plug. (Spares may be obtained from 
your BISSELL supplier). If for any reason the 
plug is cut off, it must be disposed of, as it is 
an electric shock hazard should it be inserted 
into a 13 amp socket.   
						

							Dirty Tank
www.bissell.com 4
Power CordHeat 
 
Indicator Light
Carry Handle
Upper Handle
Portable Spot 
Cleaning Release 
Pedal Quick Release™ 
Cord Wrap  Formula & 
Water Tank
Flex Hose
Removeable 
Nozzle
Edge Sweep™ 
Brushes
Product view
Power Button  
						

							www.bissell.com 
Support Handle
Tool Storage 
(select models)
Hose Secure 
Latch Tool Storage
Cord Clip
Recline Pedal
Product view
5
Cleaning formula
WARNING: To reduce the risk of fire 
and electric shock due  
to internal component   
damage, use only   
BISSELL cleaning formulas 
intended for use with the 
deep cleaner.
Spray Trigger
Note: Additional BISSELL formula options may be available at your local \
retailer.
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protect 
whenever it fits your schedule. Always use genuine BISSELL deep cleaning\
   
formulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty.
651 mL  
Tough 
Stain 
Precleaner
#0400-E
473 mL 
 
2X Hard 
Floor 
Solutions
#56L9-E1.5 L 
2X Wash & 
Protect Pet 
Stain & Odour 
Formula w/ 
Scotchgard
™
Protector  
#66W9-E
1.5 L 
2X Wash 
& Protect 
Professional 
Formula w/ 
Scotchgard
™ 
 
Protector
#81L5-E 1.5 L 
2X Wash & 
Protect Fresh 
Fragrance 
Formula w/ 
Scotchgard™
Protector
 
#92F4-E  1.5 L 
 
2X Wash 
& Protect 
Spring Breeze 
Fragrance 
Formula w/ 
Scotchgard™
Protector  
#12W4-E 1.5 L 
 
2X Wash 
& Protect 
Lavender 
Fragrance 
Formula w/ 
Scotchgard
™
Protector  
#33D2-E     
						

							www.bissell.com 
Assembly 
6
Your CleanView® Lift-Off® comes in two 
easy to assemble components: 
1.  Upper handle
2.  Portable spot cleaner/Base
The only tool you will need to  
assemble your cleaner is a Phillips 
screwdriver.
1.  Slide upper handle onto base
2.  Screw the four included screws into the 
marked holes. 
Note: two of the holes are located 
underneath the support handle indi-
cated by graphics. Angle screwdriver 
to secure into place. 
3. Wrap power cord around Quick Release 
Cord Wrap.
4.  Wrap flex hose around the hose wrap 
and secure with hose secure latch.
5.  Snap attachment(s) into the back of unit. 
Warning:   Do not plug in your  
cleaner until you have  
completely assembled it 
per the above  instructions 
and are familiar with all 
instructions and operat-
ing procedures.
1.
2.
1. 2.
Screw Holes  
						

							www.bissell.com 7
Operations
Special features 
Innovative cleaning technology
This innovative deep cleaner offers two 
machines in one. The upright deep cleaner 
uses the power of heat, brushes and clean-
ing formula to get deep down dirt for a 
maximum clean. The portable spot cleaner 
detaches to clean tough spots and stains and 
hard to reach areas. 
Hot water heater
This deep cleaner features a patented 
built-in hot water heater which will heat 
the hand hot tap water you put in to safely 
optimize cleaning effectiveness. The heater 
temperature is limited to prevent carpet 
damage. The heater automatically turns  
on when you turn the machine on. This 
operates only in upright cleaning mode. 
Scotchgard™ Protector
Carpet protection applied at the mill typically 
wears down over time from heavy foot traffic 
and everyday cleaning, including deep clean-
ing. To help restore this important protection, 
only BISSELL offers deep cleaning formulas 
with Scotchgard protector. This offers extra 
protection against dirt and tough stains to 
keep your carpets looking good longer. 
Microban® antibacterial protection
Microban antibacterial protection helps  
prevent the growth of harmful common 
household bacteria including E. coli, 
Salmonella and Staph. a. It helps to keep   
the unit fresher and cleaner between uses.
 
Pedal graphic
Tip:
For easy carrying, grab the 
carry handle portable spot 
cleaner and balance with the 
handle on the back of the 
machine.  
						

							www.bissell.com 
Operations
8
Before you clean
1. Move furniture to another area if cleaning 
an entire room (optional). 
2.  Vacuum area with a dry vacuum cleaner 
thoroughly before deep cleaning.
3.  Pretreating (optional):
3a.  Pretreating is recommended to improve 
cleaning effectiveness for heavily soiled 
carpet in high traffic areas such as 
entryway and hallways. 
3b.  BISSELL Tough Stain precleaner
  Spray the BISSELL Tough Stain  
precleaner formula onto heavy traffic 
areas, soiled areas or stains. 
  Allow to penetrate for at least 3 minutes. 
  Clean as normal, using the deep 
cleaner in upright mode, following the 
instructions below. 
Upright cleaning mode
Filling formula & water tank
1. Remove tank from the base of the machine 
by lifting up tank carry handle. 
Note: This tank was designed with a flat 
bottom so it can be easily filled.
2. Unscrew the black cap and remove bottle 
insert.  
3.  Fill tank with hand hot tap water to the 
water fill line. Add 60 mL of BISSELL 2X 
formula to the tank. 
4.  Replace the bottle insert in the tank and 
tighten the black cap. Replace the tank on 
the deep cleaner. 
Cleaning
1. Plug into a proper outlet and press the 
power button. Allow 1 minute for the hot 
water heater to warm-up before cleaning. 
2.  While pressing the spray trigger, make one 
slow forward wet pass and another one back. 
ATTENTION:   Some Berber carpets have a ten-
dency to fuzz with wear. Repeated  
strokes in the same area with an    
ordinary vacuum or deep cleaner  
may aggravate this condition.  
1.
3b.
2.
WARNING:
To reduce the risk of fire, use only  
BISSELL deep cleaning formula for  
full size machines in your deep  
cleaner. Use of cleaning formulas  
that contain lemon or pine oil may  
damage this appliance and void the  
warranty. Chemical spot cleaners or  
solvent-based soil removers should  
not be used. These products may  
react with the plastic materials used in  
your deep cleaner causing cracking  
or pitting.    
						

							www.bissell.com 9
Operations
Cleaning continued
3. Release the spray trigger and make one 
slow forward and backward pass over the 
same area. Repeated passes will help aid 
in dry time. 
4.  Continue passes until cleaning area is   
complete. 
Note: Your machine may be equipped 
with a circuit breaker that will auto-
matically shut off the brush if a large 
or loose object is caught in the brush 
roll. If that happens, be sure to unplug 
your machine, remove the foreign 
object, and then plug the machine 
back in to reset the circuit breaker. 
Empty dirty tank
1.  When the dirty tank reaches the 
“FULL” line on the tank it is time to 
empty. 
2.  Remove dirty tank and carry to a utility 
sink, toilet or outside (where you will  
dispose of the dirty water). 
3.  To unlock the dirty tank lid, rotate han-
dle over the back of the tank. Remove 
lid and pour out dirty water. Rinse out 
dirty tank to remove any debris. 
4.  Replace top of tank, and rotate the 
handle forward to lock in place on front 
of tank. 
Cleaning your machine
1. Flush out machine of any remaining 
residual solution. 
  Fill the formula & water tank with 
hand hot tap water and turn on your 
machine.
  Recline handle and press the spray trig-
ger for about 15 seconds while making 
forward and backward passes on car -
pet. Continue without pressing the spray 
trigger until there is no more water 
being suctioned up. 
  Turn off the machine and wrap the power 
cord. Make sure the dirty tank and the 
formula & water tank are emptied, rinsed, 
and dried before the next use.
  Before you replace tank, clean all 
debris from red filter screen.  
Upright cleaning mode continued
CAUTION:   Do not overwet. Take care not 
to run over loose objects or 
edges of area rugs. Stalling 
brush may result in premature 
belt failure. 
Tip:
Make only one trip to the sink 
by removing the entire por -
table cleaner. Fill and empty 
in the same trip.
2. 3.
4.
Tip:
For best results empty, 
rinse and dry both tanks 
before storing. 
WARNING:  To reduce the risk of fire, electric 
shock, or injury, turn power   
OFF and disconnect plug from 
electrical outlet before performing 
maintenance or troubleshooting.  
						

							www.bissell.com 
Operations
10Cleaning your machine continued
2. 
Rinse front nozzle of any dirt and debris. 
  Remove portable spot cleaner from the 
base of the machine. 
  Unscrew three screws with Phillips screw 
driver and remove nozzle. 
  Rinse nozzle out at the faucet. 
  Place back onto the machine by hooking 
the tabs into the holes on the bottom sides 
of the machine. Secure with screws. 
3.  The inside of the end caps can be 
wiped out with a clean paper towel, 
or for a more thorough clean, the end 
caps can be taken off and rinsed clean. 
4.  Any loose hair or debris can be pulled 
from the brush rolls and thrown away. For 
a more thorough clean, follow directions 
on page 15 for removal of brush rolls.
Your machine is now ready to be stored. 
  
Note: Store cleaner in a protected, 
dry area. Since this product uses 
water, it must not be stored where 
there is a danger of freezing. 
Freezing will damage internal   
components and void the warranty.
Upright cleaning mode continued
2.
WARNING:   To reduce the risk of fire, elec-
tric shock or injury unplug from 
outlet before servicing.
Tip:
Let all parts dry completely 
and replace onto machine.