Bisell CleanView Deep Clean Carpet Cleaner 18Z7E User Manual

2Thank You
USER'S GUIDE
42U7, 18Z7 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
Troubleshooting
Consumer ServicesReplacement Parts3
4-5
6
6-16
17-19 20
24 21
Accessories
Warranty22
23    

www.bissell.com 
Thanks for buying a BISSELL CleanView® Deep Clean 
We’re glad you purchased a BISSELL CleanView® Deep Clean heated 
formula deep cleaner. Everything we know about floor care went 
into the design and construction of this complete, high-tech home 
cleaning system.
Your BISSELL CleanView® Deep Clean is well made, and we back 
it with a limited five year warranty. We also stand behind it with 
a knowledgeable, dedicated Consumer Services department, so, 
should you ever have a problem,...

www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
READ ALL INSTRUCTIONS  
BEFORE USIN g YOUR  
DEEP CLEANER. 
Always connect to a properly Earthed   
outlet. Unplug from outlet when not in use 
and before conducting maintenance or 
troubleshooting.  
   WARNIN g: To  
reduce the risk of fire, 
electric shock, or injury:
 ■  Use indoors only
■ Do not immerse; use only on surfaces 
moistened by cleaning...

www.bissell.com 4
CleanShot™ 
Trigger
Tough Stain
™ 
Brush
Extra Long 
Power Cord
Heat   
Indicator Light Easy Carry 
Handle
Tank Carry 
Handle
Upper Handle
ReadyTools™ 
Dial
Flex Hose
CleanShot
™
Heater Switch
Easy To Remove 
Nozzle Edge Sweep
™ 
Brushes Dry Aire
™
Lower Base 2-in-1 
Water Tank
Product view
Spray Trigger
Custom Clean
™ Dial
Power Switch  

www.bissell.com 
Upper Hose 
Rack
Crevice Tool 
HolderHose secure 
Latch
Lower Hose 
Rack
Detent Pedal
Formula Tank
Product view
5
WARNING:  To reduce the risk of fire and  
electric shock due to internal com-
ponent damage, use only BISSELL  
cleaning formulas intended for use  
with the deep cleaner. Non-BISSELL  
cleaning formulas may harm the  
machine and void the warranty.
Spray Trigger
Note: Additional BISSELL formula options may be available at your local \
retailer.
Cleaning formula:
Keep plenty...

www.bissell.com  
Assembly 
6
Operations
Your CleanView® Deep Clean comes in 
three, easy to  assemble components: 
  Upper Handle  
  Lower Handle  
  Tool Caddy 
The only thing you will need to   
assemble your cleaner is a Phillips 
head screwdriver.
1.  Slide upper handle onto lower handle. 
2.   Screw 3 screws into the marked holes.
3.   Place upper hose rack onto back of 
upper handle, and secure with screw.
4.   Place lower hose rack onto back of 
upper handle by pushing in and sliding 
down until...

www.bissell.com 7
Operations
Custom Clean™
The Custom Clean feature automatically mixes 
hand hot tap water with the BISSELL 2X formula. 
Simply choose one of the 4 settings (heavy  
traffic, normal clean, light clean, or water rinse) 
and the CleanView
® Deep Clean will adjust the 
right amount of cleaning solution to mix with the 
heated water to fit your cleaning need.
CleanShot™ 
The CleanShot feature gives you the ability to 
tackle tough stains with the push of a button. 
Cleaning solution is...

www.bissell.com 
Operations
8
ReadyTools™ dial
This provides either floor cleaning or above floor 
cleaning with the turn of a knob. Choose "TOOLS" 
setting for stairs, upholstery and hard to reach 
areas and "FLOOR CLEANING" for carpets area 
rugs and bare floors.
Scotchgard™ Protector
Carpet protection applied at the mill typically 
wears down over time from heavy foot traffic and 
everyday cleaning, including deep cleaning. To 
help restore this important protection, only BISSELL...

www.bissell.com 9
Operations
Before you clean
1. Move furniture to another area if 
cleaning an entire room (optional).
2.  Vacuum area with a dry vacuum 
cleaner thoroughly before deep cleaning.
3.  Plan your cleaning route to leave an exit 
path. It is best to begin cleaning in the   
corner farthest from your exit.  
4.  Pretreating  (optional) 
Pretreating is recommended to improve 
cleaning effectiveness for heavily soiled 
carpet in high traffic areas such as   
entryways and hallways. 
  Option A:...

www.bissell.com 
Operations
10
Carpet cleaning
1. Fill the 2-in-1 Water Tank. Remove the tank 
from the base of the machine by lifting up 
the tank carry handle. Carry like a bucket 
to the sink.
1a.  Unlatch the top of the tank from the 
bottom by lifting up on the tank latch 
located on the back of the tank.
1b.  Remove the top of the tank by lifting up 
on the handle. 
Note how the lip on the top tank 
separates from the groove in the 
bottom tank. This placement is 
important when putting the tank...