BenQ Xl2411z User Manual

XL Series
User Manual
 

2   
Copyright
Copyright © 2013 by BenQ Corporation. All rights reserved. No part of this publication may 
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any 
language or computer language, in any form or by any means, electronic, mechanical, magnetic, 
optical, chemical, manual or otherwise, without the prior written permission of BenQ 
Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

  3
Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose 
you to dangerous voltages or other risks. If any of the above mentioned misuse or other 
accident such as dropping or mishandling occurs, contact qualified service personnel for 
servicing.
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its 
aspiration to realize the ideal of the Bringing Enjoyment N Quality to Life corporate vision 
with the ultimate...

4   
Table of Contents
Copyright ......................................................................................................................................2
Disclaimer .....................................................................................................................................2
Power Safety  .................................................................................................................................2
Getting started...

  5   Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged, 
please contact the place of purchase for a replacement.
BenQ LCD Monitor
Monitor Base
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product supplied 
for your region.)
Video Cable: D-Sub 
Video Cable: DVI-D Dual Link
 

6  Getting started  
Video Cable: HDMI
(Optional accessory)
• Available accessories and the pictures shown here may differ from the actual contents and the product 
supplied for your region. For cables that are not supplied with your product, you can purchase them 
separately.
• Consider keeping the box and packaging in storage for use in the future when you may need to transport the 
monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Always keep the product and...

  7   Getting to know your monitor
Getting to know your monitor
Front view
Back view
1.  Control buttons
2.  Power button
12
3.  AC Power Input jack
4.  Height release
5.  Cable clip
6.  D-Sub socket
7.  DVI-D socket
8.  HDMI socket
9.  Kensington lock slot
10. Headphone jack
• Above diagram may vary depending on the model.
• Picture may differ from product supplied for your region.
345 678 910
 

8  How to assemble your monitor hardware  
How to assemble your monitor hardware
 
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor 
around on your desk will...

  9   How to assemble your monitor hardware
Carefully lift the monitor, turn it over and place it 
upright on its stand on a flat even surface.
Extend the stand to the maximum extended 
position. And rotate the monitor 90 degrees 
counterclockwise as illustrated.
You might want to adjust the monitor stand height. 
See Adjusting the monitor height on page 13 for 
more information.
You should position the monitor and angle the screen to 
minimize unwanted reflections from other light sources.
-5O~ +20O
 

10  How to assemble your monitor hardware  
2. Connect the PC video cable.
Do not use both DVI-D cable and D-Sub cable on the same 
PC. The only case in which both cables can be used is if they 
are connected to two different PCs with appropriate video 
systems.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end 
without the ferrite filter) to the monitor video 
socket. Connect the other end of the cable (at the 
end with the ferrite filter) to the computer video 
socket.
Tighten...