BenQ W7000 Users Manual

  31
  Connecting with video equipment
Color Management
In most installation situations, color management will not be necessary, such as in classroom, meeting 
room, or lounge room situations where lights remain on, or where building external windows allow 
daylight into the room. 
Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or 
home theaters, should color management be considered. Color management provides fine color control 
adjustment to allow...

32 Connecting with video equipment  
Setting Film Mode
This feature helps improve picture quality when projecting video image 
from a film-sourced DVD or Blu-ray Disc.
Setting 3D Comb Filter
This feature separates composite signal to Y (brightness) signal and C 
(color) signal, and can help produce clearer and sharper images with 
correct colors in place.
This function is only available when a Video signal is selected.
Selecting the aspect ratio
The aspect ratio is the ratio of the image width to the...

  33
  Connecting with video equipment
3.Letter Box (LB): Scales a picture to fit the projector’s native 
resolution in its horizontal width and resize the picture’s height to the 
3/4 of the projection width. This may produce a picture greater in 
height than can be displayed, so part of the picture is lost (not 
displayed) along the top and bottom edges of the projection. This is 
suitable for the display of movies which are presented in letter box 
format (with black bars on the top and bottom)....

34 Connecting with video equipment  
Operating in a high altitude environment
We recommend that you activate High Altitude Mode when your environment is higher than 1500 
meters (around 4920 feet) above sea level, or whenever the projector will be used for extended periods 
of time (>10 hours) without shutdown.
To activate High Altitude Mode:
1. Press MENU and then press  /  until the Advanced Setup 
menu is highlighted.
2. Press   to highlight High Altitude Mode.
3. Press /  to select On. A confirmation...

  35
  Connecting with video equipment
Displaying more than one image source 
simultaneously
Your projector is capable of displaying pictures simultaneously from two input sources, which can be used 
to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly 
connected to the projector.
To display the PIP window:
•  Using the remote control
Press PIP to display the PIP page and make adjustments by following the 
steps starting from step 3 in the section Using...

36 Connecting with video equipment  
Watching 3D content
Your BenQ projector supports playing three-dimensional (3D) content transferred through HDMI.
Connecting 3D video devices
• PlayStation games
i. Make sure you have updated your console to the latest software version in PlayStation 3.
ii. Insert the 3D game disc. Or you can download games via the PlayStation network.
iii. Launch the game and select Play in 3D in the in-game menu.
• Blu-ray 3D player
i. Make sure your player supports 3D Blu-ray Disc...

  37
  Connecting with video equipment
The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do 
not affect the projection settings, operation, or performance. 
• Menu Display Time in the System Setup > Menu Settings menu sets the length of time the 
OSD will remain active after your last key press. Use  /  to select a suitable time length.
• Menu Position in the System Setup > Menu Settings menu sets the OSD position in five 
locations. Use  /  to select a...

38 Connecting with video equipment  
On-Screen Display (OSD) menus
On-Screen Display (OSD) structure
Please note that the on-screen display (OSD) menus vary according to the signal type selected.
Main menuSub-menuOptions
Picture -- 
Basic
Preset Mode Cinema/Dynamic/Standard/User 1/User 2/User 3
Load Settings From
Brightness 0–100
Contrast 0–100
Color 0–100
Tint 0–100
Sharpness 0–15
Flesh Tone 0–5
Reset Picture Settings
Picture -- 
Advanced
Black Level 0 IRE/7.5 IRE
Clarity ControlNoise Reduction 0–31...

  39
  Connecting with video equipment
Note that the menu items are available when the projector detects at least one valid signal. If there is no 
equipment connected to the projector or no signal detected, limited menu items are accessible.
Display
Frame Interpolation
Off/Low/Middle/High
3D3D Mode Auto/Off/On
3D FormatFrame Sequential/Frame Packing/Top-
Bottom/Side-by-Side
3D Sync Invert Disable/Invert
System Setup
Language
Splash Screen BenQ/Black/Blue
Projector PositionFront Table/Front Ceiling/Rear...

40 Connecting with video equipment  
Picture -- Basic menu
Picture -- Advanced menu
FunctionDescription
Preset Mode
Pre-defined picture modes are provided so you can optimize your projector 
picture set-up to suit your program type. See Selecting a preset mode on 
page 26 for details.
Load Settings From
Selects a preset mode that most suits your need for the picture quality and 
further fine-tune the picture based on the selections listed below. See Setting 
the User 1/User 2/User 3 mode on page 27 for...