BenQ W1100/w1200 Digital Projector User Manual

							
Specifications 61
Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image 
vibration.
Supported timing for Component-YPbPr input
Supported timing for Video and S-Video inputs
VIDEO
(HDCP) 15.73 59.94 27 480i
15.63 50i 27 576i
31.47 59.94 27 480p
31.25 50p 27 576p
44.96 59.94 74.25 720p60
37.50 50p 74.25 720p50
26.97 23.98 74.25 1080/24P
28.13 25 74.25 1080/25P
33.72 29.97 74.25 1080/30P
33.72 59.94 74.25 1080i60
28.13 50i 74.25 1080i50
67.43 59.94 148.5 1080p60
56.25 50p 148.5 1080p50
Signal FormatHorizontal Frequency 
(kHz)Vertical Frequency (Hz)
480i 15.73 59.94
480p 31.47 59.94 576i 15.63 50.00
576p 31.25 50.00
720/50p 37.5 50.00
720/60p 44.96 59.94
1080/50i 28.125 50
1080/60i 33.72 59.94
1080/24P 26.97 23.98
1080/25P 28.125 25
1080/30P 33.72 29.97
1080/50P 56.25 50
1080/60P 67.43 59.94
Video modeHorizontal 
Frequency (kHz)Ver t ic al  
Frequency (Hz)Color sub-carrier 
Frequency (MHz)
NTSC 15.73 60 3.58 PAL 15.63 50 4.43
SECAM 15.63 50 4.25 or 4.41 PAL-M 15.73 60 3.58PAL-N 15.63 50 3.58
PAL-60 15.73 60 4.43
NTSC4.43 15.73 60 4.43 
						

							Warranty and Copyright information 62
Warranty and Copyright information
Patents for W1100/W1200
This BenQ projector is covered by the following patents:
U.S. patents 6,837,608; 7,275,834; 7,181,318; TW patents 202690; 205470; I228635; I259932; 
China Patents (中国发明专利) ZL01143168.7; ZL03119907.0; ZL200510051609.2
Limited warranty
BenQ warrants this product against any defects in material and workmanship, under normal 
usage and storage.
Proof of purchase date will be required with any warranty claim. In the event this product is 
found to be defective within the warranty period, BenQs only obligation and your exclusive 
remedy shall be replacement of any defective parts (labor included). To obtain warranty 
service, immediately notify the dealer from which you purchased the product of any defects.
Important: The above warranty shall be void if the customer fails to operate the product in 
accordance with BenQs written instructions, especially the ambient humidity must be in-
between 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 
feet, and avoiding to operate the projector in a dusty environment. This warranty gives you 
specific legal rights, and you may have other rights which vary from country to country.
For other information, please visit www.BenQ.com.
Copyright
Copyright 2010 by BenQ Corporation. All rights reserved. No part of this publication may 
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any 
language or computer language, in any form or by any means, electronic, mechanical, 
magnetic, optical, chemical, manual or otherwise, without the prior written permission of 
BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, 
with respect to the contents hereof and specifically disclaims any warranties, merchantability 
or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise 
this publication and to make changes from time to time in the contents hereof without 
obligation to notify any person of such revision or changes.
*DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others 
are copyrights of their respective companies or organizations. 
						

							Regulation statements 63
Regulation statements
FCC statement
CLASS B: This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the distance between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
EEC statement (for European users)
This device complies with the requirements set out in the Council Directives on the 
Approximation of the Laws of the Member States relating Electromagnetic Compatibility 
(2004/108/EC) , Low Voltage Directive (2006/95/EC), the Restriction of The Use of Certain 
Hazardous Substances in Electrical And Electronic Equipment Directive (2002/95/EC), 
Turkish EEE Directive, Commission Regulation (EC) No 1275/2008 implementing Directive 
2005/32/EC of the European Parliament and of the Council with regard to ecodesign 
requirements for standby and off mode electric power consumption of electrical and 
electronic household and office equipment, and the Directive 2009/125/EC of the European 
parliament and of the council establishing a framework for the setting of ecodesign 
requirements for energy-related products.
WEEE directive
Disposal of Waste Electrical and Electronic Equipment by users in private households 
in the European Union.
This symbol on the product or on the packaging indicates that this can 
not be disposed of as household waste. You must dispose of your waste 
equipment by handling it over to the applicable take-back scheme for the 
recycling of electrical and electronic equipment. For more information 
about recycling of this equipment, please contact your city office, the shop 
where you purchased the equipment or your household waste disposal 
service. The recycling of materials will help to conserve natural resources 
and ensure that it is recycled in a manner that protects human health and 
environment.
   
						

							Regulation statements 64
Accessibility Requirements for Rehabilitation Act of 1973, Section
508
BenQ’s commitment to accessible products allows us to support government in making 
accessible technology choices BenQ’s LCD monitors and projectors are compliant with 
Section 508 guidelines by including the assistive features as below:
• BenQ’s monitors have colored “Power” indicators. While the indicator shows green, it means that 
the monitor is using the full power. While the indicator shows yellow or amber, it means that the 
monitor is in suspend or sleep mode and is using less than 2 watts of electricity.
• BenQ’s monitors have a variety of settings of pre-programmed flicker-free timing to make the 
screen shown on the monitor readily accessible. The default timing setting is automatically turned 
on every time the monitor is powered up, and thus reduces the hassle of user intervention.
• BenQ’s monitors and projectors have options for brightness and contrast adjustments that text 
and images could be displayed differently to meet the demands of the visually impaired.  Other 
similar adjustments are also available by using the On-Screen Display (OSD) controls on the 
products.
• BenQ’s monitors and projectors include user-selectable color controls, such as color temperature 
selections (Monitor: 5800K, 6500K and 9300K, Projector: 5500K, 6500K, 7500K and 9300K), with 
a wide range of contrast levels.
• BenQ’s multimedia monitors and projectors usually have one or two speakers for audio 
performance which allow users (including hearing impaired) to interact with the computer 
systems connected. Speaker controls are typically located on the front-panel. 
• Firmware of BenQ’s monitors and projectors contain unique product information that helps 
computer systems to identify BenQ products and activate their Plug-and-Play function when 
connected.
• All BenQ’s monitors and projectors are compatible with the PC99 standard. For example, 
connectors are color-coded to help users easily connecting products to computer systems 
correctly.
• Some models of  BenQ’s monitors and projectors contain additional USB and DVI ports for 
connection to more devices such as a special headphone to assist the hearing impaired.
• All BenQ monitors and projectors come with user manuals on compact discs which could be 
easily read by commercial software such as Adobe Reader via a connected computer system.  
These documents are also available on the BenQ’s web site (www.BenQ.com ).  Other types of documents may be available upon requests.
• BenQ’s customer service provides answers and assistance to all our customers through phone 
calls, facsimiles, e-mails, or web sites. 
						

							Regulation statements 65
• The mains lead (power cable) on the Projector comes with a moulded plug incorporating a fuse.
•  The rating of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse 
approved by ASTA or BSI to BS 1362 of the same rating must be used.
•  If the plug has a detachable fuse cover, remember to place the fuse cover back if you need to 
change the fuse.
•  Do NOT use a plug without the fuse cover. If the fuse cover is missing, contact your nearest 
BenQ Customer Service Center for assistance.