BenQ Vz2350hm User Manual

VZ Series
LCD Monitor
User Manual
 

2
Copyright
Copyright © 2014 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or tr\
anslated into any language or 
computer language, in any form or by any means, electronic, mechanical, \
magnetic, optical, chemical, 
manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

3
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its aspirati\
on 
to realize the ideal of the “Bringing Enjoyment ‘N Quality to Life” corporate vision with the ultimate 
goal to achieve a low-carbon society. Besides meeting international regulatory requirement and 
standards pertaining to environmental management, BenQ has spared no efforts in pushing our 
initiatives further to incorporate life cycle design in the aspects of material selection,...

4
Table of Contents
Copyright ...............................................................................................................\
.2
Disclaimer ..............................................................................................................\
 2
Servicing ...............................................................................................................\
... 2
Safety...

5
Box contents
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
  
 
LCD Monitor
CD-ROM Monitor Base
Power Cable D-Sub Cable DVI CableHDMI Cable
• *: Optional accessory.
•  Available accessories and the pictures shown here may differ from the actual contents and the \
product 
supplied for your region. For cables that are not supplied with your product, you can purchase them 
separately.
•  Consider keeping...

6
Installation
• If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to 
the monitor until instructed to do so.
•  The following illustrations are for your reference only. Available input\
 and output jacks may vary depending on 
the purchased model.
•  Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or...

7
Cleaning
Please disconnect the power cord before cleaning the product.
Clean the cabinet regularly with a cloth. You can use soft-detergent to wipe out the stain, instead of 
strong-detergent which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cl\
eaning cloth should not be 
too rough as it will scratch the screen surface.
Adjusting viewing angle
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the...

8
Connecting the monitor
VZ2250/VZ2350
134
VZ2350HM
12345
No.Description
1 AC power input jack
2 HDMI socket
3 DVI-D socket
4 D-Sub socket
5 Audio Line In
1.  To protect equipment, always turn off the PC and LCD monitor before connecting.
2.  Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video 
socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer 
video socket.
3.  (Optional – Requires a video card with DVI port) -...

9
Removing the monitor stand
1. Turn off the monitor and the power before unplugging the power cable. Tu\
rn off the computer 
before unplugging the monitor signal cable.
2.  Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item 
like a towel on the desk for padding, before laying the screen face down on a flat clean padded 
surface.
3.  Remove the monitor stand.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a...

10
The control panel
 
12
3 4
5
VZ2250 / VZ2350
VZ2350HM
No. Description No.Description
1 Source / Auto / Exit 1Source / Auto / Exit
2 ECO / - 2ECO / -
3 4:3 or wide / + 3Volume / +
4 Menu / Enter 4Menu / Enter
5 Power 5Power
Source / Auto / Exit
• Press and hold the AUTO key for 3 serconds to adjusts vertical position, phase, horizontal 
position and pixel clock automatically.
•  Press the AUTO key to switch to a desired input source, and confirm with the  MENU key.
•  When in the OSD menu, press to...