BenQ T261w User Manual

							 
T261W
User Manual
●  ENGLISH ○  DEUTSCH ○  ESPAÑOL  ○  ITALIANO  ○  FRANÇAIS   
○ 
ﻲﺑﺮﻋ 
○  日本语 
○  繁體中文  ○ 简体中文  ○  한국어 
○  Magyar   ○ Čeština  ○ POLSK ○ PORTUGUÊS  ○ Русский 
Downloaded from ManualMonitor.com ManualL 
						

							CONTENTS 
 
Safety Instruction........................................................................\
....................................................... ............ 2 
Chapter 1
   Introduction ........................................................................\
....................................................... 4 
1.1 Features ........................................................................\
....................................................... .............. 4 
1.2 Checking List ........................................................................\
....................................................... ..... 4 
Chapter 2    Installation ........................................................................\
....................................................... ... 5 
2.1 Installing / Removing the Pedestal ........................................................................\
..................... 5 
2.2 Connecting the Monitor ........................................................................\
......................................... 5 
2.2.1 Connecting Cables ........................................................................\
...................................... 5 
2.2.2 HDMI Connecting ........................................................................\
........................................ 6 
Chapter 3
   Overview of the monitor ........................................................................\
................................. 7 
3.1 Cotrols Panel ........................................................................\
....................................................... ..... 7 
Chapter 4
   Adjusting the monitor ........................................................................\
...................................... 8 
4.1 Direct Functions ........................................................................\
...................................................... 8  
4.1.1 Power Switch ........................................................................\
................................................ 8 
4.1.2 Volume and Mute ........................................................................\
......................................... 8 
4.1.3 Input Source ........................................................................\
................................................. 8 
4.1.4 Auto-Adjustment ........................................................................\
......................................... 8 
4.2 OSD Menu Functions ........................................................................\
............................................. 9 
4.2.1 Menu Features ........................................................................\
.............................................. 9 
4.2.2 OSD Menu ........................................................................\
..................................................... 9 
Chapter 5
   Technical Information ........................................................................\
.................................... 11 
5.1 General Specification ........................................................................\
........................................... 11 
5.2 Preset mode ........................................................................\
....................................................... .... 12 
5.3 Plug and Play ........................................................................\
....................................................... .. 12 
5.4 Signal connector pin assignment ........................................................................\
...................... 13 
5.4.1 DVI-D signal con nector pin assignment..................................................................... 13 
5.4.2 D-Sub signal connector pin assignment ..................................................................... 13 
Appendix A    Trouble shooting ........................................................................\
......................................... 14 
 
 
 
 
						

							Safety Instruction 
Warning: Please read all of following safety instructions in order  to  prevent  harm  to  the 
user and damage to property. 
¾  Power 
•  Ensure that the local mains voltage lines within the limit of A C 100~240V. 
• Use the power cord of accessories it is enclosed with your moni tor, do not use 
attachments not recommended by manufacturer as they may cause h azards. 
• Use only a properly grounded wall outlet and extension plug and  receptacle. Do 
not use a damaged or loosed plug. An improper ground may cause  electric shock 
or equipment damage. 
•  Do not overload wall outlet and extension cords as this may cau se an electric 
shock or fire. 
•  The socket outlet shall be near th e equipment and insert the power plug firmly so 
that it does not come loose. A bad connection may cause fire. 
•  Do not disconnect the power cord while using the monitor. A sur ge may be 
caused by the separation and may damage the monitor. 
•  Do not allow anything to rest on the power cord; wire nor place  heavy objects 
upon them, which could cause damage.    
•  Unplug power cord from the wall outlet when monitor not used for a long periods 
of time. This will prevent dama ge to the monitor due to power l ine surge. 
¾  Installing   
• Do not use the monitor near water, for instance, near a bathtub , washbowl, 
kitchen sink, or laundry tub, in wet basement, or near a swimmi ng pool, etc. 
• Do not place the monitor on an unstable table or small surface  area and car. The 
monitor may fall and cause damage to the product or injury to personal 
specifically children. 
•  Installing a wall bracket must be done by a qualified professio nal and always use 
the mounting device specified in this manual. Otherwise, this m ay result in injury. 
• Do not install the monitor in pl aces with poor ventilation, for instance, a bookshelf, 
closet, etc. Any increase in inte rnal temperature may cause fire. 
• Keep any heating devices away from the monitor specifically the  power cable, 
and keep any flammable objects such as candles, insecticides or cigarettes away 
from the monitor. Otherwise, this may cause a fire. 
•  Never push objects of any kind such as necklaces, paperclips an d metal gadgets, 
or liquids get into the interior of the monitor. Otherwise, thi s may cause an 
electrical shock or short circuit. 
•  Keep the PE bags out of children’s reach. The PE bags may cause  suffocation if 
children play with it.   
 
Downloaded from ManualMonitor.com ManualL 
						

							Safety Instruction 
¾  Cleaning  
• Unplug the power cord before cleaning the monitor. Otherwise, t his may cause 
electric shock or fire.   
•  Use a smooth cloth with the reco mmended detergent for monitor c leaning, but 
for the connector of cable and plug of power cord, please clean  it properly with a 
dry cloth. 
•  Do not use the caustic chemicals detergent such as benzene, thi nners, and 
insecticide, air freshener, lubricant or wax for cleaning. 
•  Do not remove the back cover; this may cause an electric shock  or fire. 
¾  Maintaining 
• Do not attempt to repair this monitor yourself since opening or  removing covers 
may expose you to dangerous voltage or other hazards. Refer all  servicing to 
qualified service personnel. 
•  Unplug monitor power cord from the wall outlet and refer servic ing to qualified 
service personnel under the following conditions:  a)  When the power cord or plug is damaged or frayed. 
b)  If an alien substances or liquid has been spilled into the moni tor, or monitor 
exposed to rain or water. 
c)  If the monitor does not operate normally, in particular, if the re are any unusual 
sounds or smells coming from it. 
d)  If the monitor does not operate  normally by following the operations 
instructions. Adjust only those controls that are coverd by the  operating 
instructions as improper adjustment of other controls, may result in damage 
and will often require extensive  work by a qualified technician to the restore 
the monitor to normall operation. 
e)  If the monitor has been dropped or the cabinet has been damaged . 
f)   When the monitor exhibits a distinct change in performance this  indicated a 
need for service. 
•  When replacement parts are required, be sure the service techni cian has used 
replacement parts specified by the manufacturer that have the s ame 
characteristics as the original parts, Unauthorized substitutio ns may result in fire, 
electric shock, or other hazards. 
•  Upon completion of any service or repairs to this monitor, ask  the service 
technicaian to perform routine s afety checks to determine that the monitor is in 
safe operatiing condition. 
  Note: Keep this operating manual together with your device. If  you pass on the device to 
third parties, you should include this manual. 
 
 
						

							Chapter 1   Introduction 
1.1 Features 
①  25.5" Wide TFT LCD Color Monitor 
②  Multi-Ports Video Sources (HDMI, DVI,VGA), and Audio Input 
③  Multi-Media Hidden Type Speaker (3Wx2) 
④  Full HD (1080p) Supported 
⑤  Windows Vista™ Premium Certification 
⑥  VESA DDC/CI  Compatible 
⑦  HDCP S upported 
⑧  High Resolution Up  to 1920x1200 (WUXGA) 
 
1.2  Checking List 
The  followi ng  accessories  are  included  in  your  package,  check  t o  see  they  are 
enclosed with your monitor: 
9   One monitor 
9   One monitor pedestal 
9   One 15pin D-Sub cable 
9   One 19pin DVI-D cable 
9   One AC power cord 
9   One CD 
9   One QSG (Quick Setup Guide) 
If anything of these contents are missing or damaged, please contact with your dealer 
for technical support and customer service. 
 
Note: Be sure to save original box and all packing material for  transport, i
n case you 
wi l l  ne e d to s t or e y our  moni tor  for  a n e xt e nde d per i od of ti me  i n th e f ut ur e.
 
 
 
 
 
 
Downloaded from ManualMonitor.com ManualL 
						

							Chapter 2    Installation 
2.1 Installing / Removing the Pedestal 
To  install  or  remove  the  pedestal  (base)  to/from  the  monitor,  please  observe  the 
Fig-2.1 as following or refer to the QSG (Quick Setup Guide). 
Fig-2 .1 
2.2 Connecting the Monitor 
Wa r n i n g :  O b s e r v e  t h e  " S a f e t y "  i n  t h e  c h a p t e r  " S a f e t y  I n t r o d u c t i on" in this operating manual 
before you connect ing the monitor.   
2.2.1 Connecting Cables 
2.2.1.1 Tur n off your computer and unplug its power cable. 
2.2.1.2 Use  a connection appropriate for your computer (refer t o Fig-2.2) 
Fig-2.2 
(1) Connect the power cord for your monitor to the  AC IN port on the back of your 
monitor. 
Downloaded from ManualMonitor.com ManualL 
						

							Chapter 2   Installation 
(2) Connect the 15pin D-Sub signal cable to the VGA ( A N A L O G )  v i d e o  p o r t  o n  t h e  
back of your monitor and computer. 
(2) Connect the 15pin D-Sub signal cable to the 
VGA ( A N A L O G )  v i d e o  p o r t  o n  t h e  
back of your monitor and computer. 
(3) Connect the 19pin DVI-D signal cable to the  DVI (DIGITAL) video port on the 
b a c k  o f  y o u r  m o n i t o r  a n d  c o m p u t e r  i f  i t s  v i d e o  c a r d  i n c l u d e d  D V I out terminal. 
(3) Connect the 19pin DVI-D signal cable to the 
DVI (DIGITAL) video port on the 
b a c k  o f  y o u r  m o n i t o r  a n d  c o m p u t e r  i f  i t s  v i d e o  c a r d  i n c l u d e d  D V I out terminal. 
(4) HDMI Connecting: please refer to chapter 2.2.2.   
(4) HDMI Connecting: please refer to chapter 2.2.2.   
(5) Connect the  Audio in terminal of your monitor and the speaker out terminal of 
your computer’s sound card using a stereo cable ( sold separately
(5) Connect the 
Audio in terminal of your monitor and the speaker out terminal of 
your computer’s sound card using a stereo cable ( sold separately
). 
2.2.1.3 Plug your computer and the  monitor power cable into a nearby outlet. 
2.2.1.4 Turn on your computer and monitor. If your monitor disp lay an image, you have 
successfully installed the monitor. If the monitor does not dis play an image, please 
check all the connectons again. 
Note:  The  details  on  the  compute r  connections  and  interfaces  are  contained  in  the 
operating manual for your computer. 
 
2.2.2 HDMI Connecting 
You can enjoy better screen and sound quality through the HDMI  cable or HDMI to 
DVI cable connecting to the digital output devices. 
2.2.2.1 Connecting the HDMI cable  1) Connect one end of the HDMI cable ( sold  separately
)  to  the HDMI port  on  the 
back of your monitor and the other end to the computer or other   digital  output 
devices, such as DVDs which have HDMI out terminals.   
2) Select HDMI by pressing the INPUT button. 
2.2.2.2 Connecting the HDMI to DVI cable  1) Connect one end of the HDMI to DVI cable ( sold separately
) to the HDMI port on   
the back of your monitor, and the other end to the DVI terminal  o n  t h e  b a c k  o f  t h e  
computer  or  other  digital  output  devices,  such  as  DVDs  which  ha ve  DVI  out 
terminals. 
2) Connect one end of an appropriate stereo cable ( sold separately
) to the Audio in  
port of your monitor and the other end to the speaker out termi nal  of  your 
computer’s sound card or audio out terminal of your DVD.   
3) Select HDMI by pressing the INPUT button. 
 
Note:  HDCP  has  been  implemented  across  DVI  interface.  The  HDCP  specification 
provides a cost-effective and transparent method for receiving the highest quality 
digital entertainment content fr om HDMI compliant video sources . 
 
Downloaded from ManualMonitor.com ManualL 
						

							Chapter 3   Overview of the monitor 
3.1 Cotrols Panel 
 
 
 
 
 
 
 
 
 
 
 
  
Fig-3.1 
 
1) Menu Button (MENU)  (1) Press it to enter into main MENU. 
(2) Under sub-OSD mode, press it to enter the sub-menu. 
2) Select Button (
◄/MUTE, ►/INPUT) 
(1) Use these buttons to choose or adjust items on the OSD. 
(2) LEFT (
◄) key: Select anti-clockwise, or adjust to decrease, and MUTE h ot key.   
(3) RIGHT (
►) key: Select clockwise, or adjust  to increase, and INPUT hot key. 
3) Auto Button (AUTO)  (1) Press it to perform the auto-adjustment of the screen. 
(2)  This  will  automatically  adjust  your  display  image  to  the  id eal  settings  for  the 
current screen resolution size. 
4) Power Button and LED Indicator (
  ) 
(1) Use this button to turn the monitor on and off. 
(2) Indicates the operating status. 
 
 
 
 
 
 
 
Downloaded from ManualMonitor.com ManualL 
						

							Chapter 4   Adjusting the monitor 
4.1 Direct Functions 
4.1.1 Power Switch 
1) This ON/OFF button is used for switching the monitor on and off 
Note:  The  ON/OFF  switch  does  not  disconnect  the  monitor  from  the  mains  voltage.  To  completely disconnect the mains voltage, please remove the powe r  plug  from  the 
socket. 
2) Power Indicator: this indicator lights up blue when the moni tor operates normally. 
I f  t h e  m o n i t o r  i s  i n  p o w e r  s a v i n g  m o d e ,  t h i s  i n d i c a t o r  c h a n g e s   the color to orange, 
when monitor is turned off, this indicator changes to dark. 
4.1.2 Volume and Mute 
1)  By  pressing  the  LEFT/RIGHT  buttons  directly  you  can  adjust  t he  volume  without 
pressing the MENU button before. Use the LEFT button to decreas e the volume and 
the RIGHT button to increase the volume. 
2) Press the LEFT button longer than 3 seconds to get audio mut e function. 
Important information o n audio playback:   
To achieve optimum sound quality from the monitor speakers, the  a u d i o  c a b l e  s h o u l d  
be  connected  to  the  Line-Out  socket  (headphone  socket)  of  the  c omputer.  If  you 
connect the audio cable to the Speaker-Out socket (soundcard) o f  the  computer, 
please set t h e v olum e under Wind ows to rang e between 20% - 40 % of  th e m ax im um  
value to achieve optimum sound quality 
4.1.3 Input Source 
Input  source:  Press  RIGHT  (►)  button  longer  than  3  seconds  to  select  INPUT 
function for switching between DVI, HDMI and VGA. 
4.1.4 Auto-Adjustment 
With the AUTO button you can start the auto-adjustment for the  current resolution. 
To do this, you must press the button slightly. During the process, the message of
 
“Auto Adjusting” is shown   
 
 
Downloaded from ManualMonitor.com ManualL 
						

							Chapter 4   Adjusting the monitor 
4.2 OSD Menu Functions 
You can use the buttons on the control panel to set the screen display via an 
integrated OSD (On Screen Display) menu. 
4.2.1 Menu Features 
The following features can all be accessed by using your monito r’s on screen menu 
s y s t e m .  O n c e  a r e  f i n i s h e d ,  m a k e  a d j u s t m e n t s  t o  a  f e a t u r e ,  a n d  s elect the EXIT icon to 
leave the menu. 
Please follow the procedures of selection and adjust an item us i n g  t h e  O S D  s y s t e m  a s  
below. 
Step 1: Press the MENU button to activate the OSD menu. The mai n menu appears on 
the screen with icons for the setting functions. 
Step 2: If necessary, use the 
◄ or ► buttons to select the icon. 
Step 3: Press the MENU button to activate the highlighted icon.  
Step 4: Use the 
◄ or ► button to make the desired setting. 
Step 5: Select the EXIT icon to exit the OSD menu. 
Step 6: Repeat step 2 through 5 to make further adjustments. 
All changes are stored immediately. 
4.2.2 OSD Menu 
1) Main menu  OSD main menu gives you an overview of the selection of control s available. When 
you want to make adjustment of the screen image, press and rele ase button menu. 
 
2) OSD adjustment 
You  can  choose  where  you  would  like  OSD  image  to  appear  on  your   screen.  All 
possible  adjustments  of  the  monitor  using  the  OSD  menu  are  desc ribed  in  the 
following. 
Downloaded from ManualMonitor.com ManualL