BenQ T261w User Manual

 
T261W
User Manual
●  ENGLISH ○  DEUTSCH ○  ESPAÑOL  ○  ITALIANO  ○  FRANÇAIS   
○ 
ﻲﺑﺮﻋ 
○  日本语 
○  繁體中文  ○ 简体中文  ○  한국어 
○  Magyar   ○ Čeština  ○ POLSK ○ PORTUGUÊS  ○ Русский 
Downloaded from ManualMonitor.com ManualL 

CONTENTS 
 
Safety Instruction........................................................................\
....................................................... ............ 2 
Chapter 1
   Introduction ........................................................................\
....................................................... 4 
1.1 Features ........................................................................\
....................................................... .............. 4 
1.2 Checking...

Safety Instruction 
Warning: Please read all of following safety instructions in order  to  prevent  harm  to  the 
user and damage to property. 
¾  Power 
•  Ensure that the local mains voltage lines within the limit of A C 100~240V. 
• Use the power cord of accessories it is enclosed with your moni tor, do not use 
attachments not recommended by manufacturer as they may cause h azards. 
• Use only a properly grounded wall outlet and extension plug and  receptacle. Do 
not use a damaged or loosed plug....

Safety Instruction 
¾  Cleaning  
• Unplug the power cord before cleaning the monitor. Otherwise, t his may cause 
electric shock or fire.   
•  Use a smooth cloth with the reco mmended detergent for monitor c leaning, but 
for the connector of cable and plug of power cord, please clean  it properly with a 
dry cloth. 
•  Do not use the caustic chemicals detergent such as benzene, thi nners, and 
insecticide, air freshener, lubricant or wax for cleaning. 
•  Do not remove the back cover; this may cause...

Chapter 1   Introduction 
1.1 Features 
①  25.5" Wide TFT LCD Color Monitor 
②  Multi-Ports Video Sources (HDMI, DVI,VGA), and Audio Input 
③  Multi-Media Hidden Type Speaker (3Wx2) 
④  Full HD (1080p) Supported 
⑤  Windows Vista™ Premium Certification 
⑥  VESA DDC/CI  Compatible 
⑦  HDCP S upported 
⑧  High Resolution Up  to 1920x1200 (WUXGA) 
 
1.2  Checking List 
The  followi ng  accessories  are  included  in  your  package,  check  t o  see  they  are 
enclosed with your monitor: 
9   One...

Chapter 2    Installation 
2.1 Installing / Removing the Pedestal 
To  install  or  remove  the  pedestal  (base)  to/from  the  monitor,  please  observe  the 
Fig-2.1 as following or refer to the QSG (Quick Setup Guide). 
Fig-2 .1 
2.2 Connecting the Monitor 
Wa r n i n g :  O b s e r v e  t h e  " S a f e t y "  i n  t h e  c h a p t e r  " S a f e t y  I n t r o d u c t i on" in this operating manual 
before you connect ing the monitor.   
2.2.1 Connecting Cables 
2.2.1.1 Tur n off...

Chapter 2   Installation 
(2) Connect the 15pin D-Sub signal cable to the VGA ( A N A L O G )  v i d e o  p o r t  o n  t h e  
back of your monitor and computer. 
(2) Connect the 15pin D-Sub signal cable to the 
VGA ( A N A L O G )  v i d e o  p o r t  o n  t h e  
back of your monitor and computer. 
(3) Connect the 19pin DVI-D signal cable to the  DVI (DIGITAL) video port on the 
b a c k  o f  y o u r  m o n i t o r  a n d  c o m p u t e r  i f  i t s  v i d e o  c a r d  i n c l u d e d  D V I out...

Chapter 3   Overview of the monitor 
3.1 Cotrols Panel 
 
 
 
 
 
 
 
 
 
 
 
  
Fig-3.1 
 
1) Menu Button (MENU)  (1) Press it to enter into main MENU. 
(2) Under sub-OSD mode, press it to enter the sub-menu. 
2) Select Button (
◄/MUTE, ►/INPUT) 
(1) Use these buttons to choose or adjust items on the OSD. 
(2) LEFT (
◄) key: Select anti-clockwise, or adjust to decrease, and MUTE h ot key.   
(3) RIGHT (
►) key: Select clockwise, or adjust  to increase, and INPUT hot key. 
3) Auto Button (AUTO)  (1)...

Chapter 4   Adjusting the monitor 
4.1 Direct Functions 
4.1.1 Power Switch 
1) This ON/OFF button is used for switching the monitor on and off 
Note:  The  ON/OFF  switch  does  not  disconnect  the  monitor  from  the  mains  voltage.  To  completely disconnect the mains voltage, please remove the powe r  plug  from  the 
socket. 
2) Power Indicator: this indicator lights up blue when the moni tor operates normally. 
I f  t h e  m o n i t o r  i s  i n  p o w e r  s a v i n g  m o d e ,  t h i s  i n d...

Chapter 4   Adjusting the monitor 
4.2 OSD Menu Functions 
You can use the buttons on the control panel to set the screen display via an 
integrated OSD (On Screen Display) menu. 
4.2.1 Menu Features 
The following features can all be accessed by using your monito r’s on screen menu 
s y s t e m .  O n c e  a r e  f i n i s h e d ,  m a k e  a d j u s t m e n t s  t o  a  f e a t u r e ,  a n d  s elect the EXIT icon to 
leave the menu. 
Please follow the procedures of selection and adjust an item us i n...