BenQ T241wa User Manual

							
T241W
24’’ Wide-Screen LCD Monitor
User Manual
 
						

							
Table of Contents
2
Ta b l e  o f  C o n t e n t s
Package contents   ...................................................... ............................. ...............................3
Installation .............. ......................................................... ......................................................4
To connect the monitor to your PC  ........................................................................\
.. 4
To connect the monitor to  the power source  ............................................................ 4
Adjusting your monito r .................................................. ......................................................5
Functions of the buttons and indicator  ..................................................................... 5
OSD icon list  ........................................................................\
....................................... 5
Troubleshooting .......... ..........................................................................................................7
Specifications .......... ......................................................... ......................................................8
24’’ Wide-Screen LCD monitor  ........................................................................\
......... 8
 
						

							
  3
  Package contents
1. Package contents 
1. LCD Monitor
2. Monitor Base (the shape of base may vary according to the monitor model)
3. Power Cord (plug may vary according to the electrical  standards for your area)
4. Analog Signal Cable
5. Quick Installation Guide
6. CD-ROM (contains user manual)
7. Audio Cable (optional)
 
						

							
4 Installation  
2. Installation
To connect the monitor to your PC
1. Make sure that the PC and monitor are unplugged.
2. Connect the signal cable (VGA/HDMI) to the monitor and the PC.
To connect the monitor to the power source
Connect the separate power cable to the monitor and a grounded outlet.
 
						

							
  5
  Adjusting your monitor
3. Adjusting your monitor
Functions of the buttons and indicator
OSD icon list
ItemFunction
Enter
Enter OSD menu, select item, enter submenu, and confirm recall.
X
1. Positive adjustment, change within several selections.
2. Hot key of Brightness.
W
1. Minus adjustment, change within several selections.
2. Hot key of Contrast.
Exit
1. Leave menu, cancel recall. (Settings will be saved automatically after  adjustments are made.)
2. Hot key of Input Select for selecting input signal through hardware.
AutoHot key of auto adjustment (for geometric settings only).
IconFunctionDescription
Auto Adjust * Optimize the picture performance automatically
Input Select * Select the input from Analog and Digital Inputs
* Factory default: Analog (VGA)
Audio * Select Volume and Mute submenu
Luminance * Select Brightness and Contrast adjustment submenu
Geometry * Select H. Position, V. Posi
tion, Pixel Clock and Phase 
adjustment submenu
Color * Select color temperature or to set up user mode
OSD * Adjust the position and time of OSD menu on the screen
Language * Select your own preference of language of OSD menu
Recall * Reset monitor parameters back to factory preset value
Miscellaneous * Select Misce llaneous adjustment submenu
Brightness * Adjust the luminance of the screen
 
						

							
6  Adjusting your monitor  
Contrast * Adjust the contrast level of the screen
H. Position * Shift the screen left or right
V. Position * Shift the screen up or down
Pixel Clock * Adjust the monitor internal sampling clock rate
Phase * Adjust the monitor internal signal phase
OSD H. Position * Shift the OSD left or right
OSD V. Position * Shift the OSD up or down
OSD Time * Set OSD display duration time
Sharpness * Adjust the sharp level of the screen
DDC/CI * Switch DDC/CI On or Off
Information * Show the display information
Volume * Adjust the level of the sound
Audio Input 
Select * Select the audio input source: Auto Detect/Line-In.
Mute * Turn the sound to mute
DCR * Switch DCR On or Off
Over Drive * Adjust the level of the Over Drive
Display Mode * Switch Display Mode: Aspect/Full/1:1
Overscan * Switch Overscan On or Off 
* Select On to remove the black borders around the displayed 
image
 
						

							
  7
  Troubleshooting
4. Troubleshooting
SymptomRemedy
*Blank Screen*
Power indicator is off
• Make sure the power cable is connected properly (see 
Installation on page 4).
•  Make sure that the monitor was turned on using the 
power switch (see 
To connect the monitor to your PC 
on page 4
).
Power indicator lights orange•  Perhaps a power saving mode is active? Press any key 
on your keyboard or move the mouse.
Power indicator lights green•  A screen saver may have activated automatically after a 
certain period of inactivity. Press any key on your key-
board or move the mouse.
No Signal Detected! message•  Is the signal cable connected to the monitor and the 
PCs graphics port (see 
Installation on page 4)? 
•  Is the PC turned on (see your PCs documentation)?
*Display Problems*
Image is displaced to the left/right 
or to the top/bottom
• If the image appears normal but off-center, you can 
adjust it using the OSD funct ions. For further informa-
tion, see Auto Adjust in the 
OSD icon list section.
Image is blurred•  Check brightness and contrast settings (see Lumi-
nance in the 
OSD icon list section).
•  Check the sharpness setting (see Sharpness in the 
OSD icon list section).
Color problems• If the colors are off (e.g., white is not really displayed as 
white etc.), you should adjust the color temperature 
(see Color in the 
OSD icon list section).
 
						

							
8 Specifications  
5. Specifications
24’’ Wide-Screen LCD monitor
ItemT241W
PanelDisplay Size 518.4 (H) x 324 (V) mm
Pixel Pitch 0.27 (H) x 0.27 (V) mm
Monitor Display Colors 16.7 M colors
Input Signal Frequency Horizontal: 30 - 94 KHz
Vertical: 50 - 76 Hz
Connector Analog D-sub 15 pin
HDMI HDMI 19 pin
Tilt Tilt Angle -5° - +20°
Swivel Swivel Angle -45° - +45°
Dimensions
(W x H x D) Net 565.6(W) x 444.8(H) x 220.1(D) mm
Weight Net 8.7 kg
Power AC AC 90-264V, 47-63 Hz
Consumption Active: < 70W / Standby: < 2W