BenQ T241wa User Manual

T241W
24’’ Wide-Screen LCD Monitor
User Manual
 

Table of Contents
2
Ta b l e  o f  C o n t e n t s
Package contents   ...................................................... ............................. ...............................3
Installation .............. ......................................................... ......................................................4
To connect the monitor to your PC  ........................................................................\
.. 4
To connect the monitor to  the power source...

  3
  Package contents
1. Package contents 
1. LCD Monitor
2. Monitor Base (the shape of base may vary according to the monitor model)
3. Power Cord (plug may vary according to the electrical  standards for your area)
4. Analog Signal Cable
5. Quick Installation Guide
6. CD-ROM (contains user manual)
7. Audio Cable (optional)
 

4 Installation  
2. Installation
To connect the monitor to your PC
1. Make sure that the PC and monitor are unplugged.
2. Connect the signal cable (VGA/HDMI) to the monitor and the PC.
To connect the monitor to the power source
Connect the separate power cable to the monitor and a grounded outlet.
 

  5
  Adjusting your monitor
3. Adjusting your monitor
Functions of the buttons and indicator
OSD icon list
ItemFunction
Enter
Enter OSD menu, select item, enter submenu, and confirm recall.
X
1. Positive adjustment, change within several selections.
2. Hot key of Brightness.
W
1. Minus adjustment, change within several selections.
2. Hot key of Contrast.
Exit
1. Leave menu, cancel recall. (Settings will be saved automatically after  adjustments are made.)
2. Hot key of Input Select for selecting input...

6  Adjusting your monitor  
Contrast * Adjust the contrast level of the screen
H. Position * Shift the screen left or right
V. Position * Shift the screen up or down
Pixel Clock * Adjust the monitor internal sampling clock rate
Phase * Adjust the monitor internal signal phase
OSD H. Position * Shift the OSD left or right
OSD V. Position * Shift the OSD up or down
OSD Time * Set OSD display duration time
Sharpness * Adjust the sharp level of the screen
DDC/CI * Switch DDC/CI On or Off
Information * Show...

  7
  Troubleshooting
4. Troubleshooting
SymptomRemedy
*Blank Screen*
Power indicator is off
• Make sure the power cable is connected properly (see 
Installation on page 4).
•  Make sure that the monitor was turned on using the 
power switch (see 
To connect the monitor to your PC 
on page 4
).
Power indicator lights orange•  Perhaps a power saving mode is active? Press any key 
on your keyboard or move the mouse.
Power indicator lights green•  A screen saver may have activated automatically after a...

8 Specifications  
5. Specifications
24’’ Wide-Screen LCD monitor
ItemT241W
PanelDisplay Size 518.4 (H) x 324 (V) mm
Pixel Pitch 0.27 (H) x 0.27 (V) mm
Monitor Display Colors 16.7 M colors
Input Signal Frequency Horizontal: 30 - 94 KHz
Vertical: 50 - 76 Hz
Connector Analog D-sub 15 pin
HDMI HDMI 19 pin
Tilt Tilt Angle -5° - +20°
Swivel Swivel Angle -45° - +45°
Dimensions
(W x H x D) Net 565.6(W) x 444.8(H) x 220.1(D) mm
Weight Net 8.7 kg
Power AC AC 90-264V, 47-63 Hz
Consumption Active: < 70W / Standby:...