BenQ T221w User Manual

							
22 wide LCD Monitor
User Manual
English
Português
Pyccкий
Deutsch
Français
Italiano
Español
Česky
Magyar
Română
SvenskaSuomi
Nederlands
Polski
日本语
简中
繁中
Hrvatski
Norsk
Dansk
  
						

							
PRECAUTIONS
   Information for users applicable in European Union countries1
   Information for users applicable in United States of America1
   Installation1
   Power connection1
   Maintenance1
Transporting the monitor1
GETTING STARTED
   Package contents  2
   Monitor installation2
   Identifying parts and controls3
Customizing your Monitor
3
3
   Introduction to Hotkeys4
   OSD icon list5
Troubleshooting7
Technical Features and Specifications
   Interface Frequency8
Addendum
Advanced Power Saving Mode9
   FCC compliance11
   The operation of Function menu4
Working with OSD Group
8
 
						

							
Congratulations!
The  display  you  have  just  purchased  carries  the 
TCO’03  Displays  label.  This  means  that  your 
display  is  designed,  manufactured  and  tested 
according  to  some  of  the  strictest  quality  and 
environmental  requirements  in  the  world.  This 
makers for a high performance product, designed with the user in focus that also 
minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
Good visual ergonomics and image quality in order to improve the working\
 
environment for the user and to reduce sight and strain problems. Import\
ant 
parameters are luminance, contrast, resolution, reflectance, color rendi\
tion and 
image stability.
Energy
Energy-saving mode after a certain time – beneficial both for the use\
r and the 
environment
Electrical safety
Emissions
Electromagnetic fields
Noise emissions
Ecology
The product must be prepared for recycling and the manufacturer must hav\
e a 
certified environmental management system such as EMSA or ISO 14001
Restrictions on 
○  chlorinated and brominated flame retardants and polymers
○  heavy metals such as cadmium, mercury and lead.
The  requirements  included  in  this  label  have  been  developed  by  TCO 
Development  in  cooperation  with  scientists,  experts,  users  as  manufacturers  all 
over the world. Since the end of the 1980s TCO has been involved in influencing 
the development of IT equipment in a more user-friendly direction. Our labeling 
system  started  with  displays  in  1992  and  is  now  requested  by  users  and 
IT-manufacturers all over the world.
For more information, please visit 
www.tcodevelopment.com
 
						

							
- 1 -
PRECAUTIONS
Transporting the monitor
1.When carrying the display to repair or check it, please press the rou\
nd button behind 
the support, remove the base, and then use the original carton and packi\
ng materials 
to wrap the display and its accessories.
5.Disconnect the power cable from the power supply if:
5.1 You will not use the monitor for an extended period.
5.2 The cable is damaged or frayed.
5.3 The monitor has been dropped or the cabinet damaged.
5.4 A distinct change in performance indicates a need for servicing.
Maintenance
1.Clean the cabinet and controls with a soft cloth lightly moistened wit\
h a mild detergent 
solution. Do not use any abrasive materials or solvents such as alcohol \
or benzene.
2.Do not rub, touch, or tap the surface of the screen with sharp or abra\
sive items such as 
pens or screwdrivers, as the screen may scratch.
3.Do not insert objects or spill liquids into the ventilation ports on t\
he monitor’s rear, as 
fire, electric shock, and / or unit failure may result.
Installation
1. Do not cover or block the ventilation ports on the rear of the monito\
r.
2. Do not install the monitor close to heat sources such as radiators or\
 air ducts, or in a 
location exposed to direct sunlight, excessive dust, mechanical vibratio\
n,or shock.
3.The apparatus shall only be used between 5° tilted forward and 20°\
 tilted backward as 
normal operation position. If the tilt angle exceeds 20°, it shall be\
 used for wall 
mounting or packaging only. 
Information for users applicable in European Union countries
The symbol on the product or its packaging signifies that this product h\
as to be 
disposed separately from ordinary household wastes at its end of life. P\
lease 
kindly be aware that this is your responsibility to dispose electronic e\
quipment 
at recycling centers so as to help conserve natural resources. Each coun\
try in 
the European Union should have its collection centers for electrical and\
 
electronic equipment recycling. For information about your recycling dro\
p off 
area, please contact your local related electrical and electronic equipm\
ent 
waste management authority or the retailer where you bought the product.\
Information for users applicable in United States of America
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE 
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR 
FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC 
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC 
DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.
Power connection
1.Use the correct power cord for your local voltage.
2.Use an accessible outlet close to the monitor.
3.Do not allow anything to rest on the power cable.
4.Only use the power adapter attached to the monitor.
  
						

							
- 2 -
GETTING STARTED
1.Setting up the monitor
   1.1 Take out the monitor and monitor base from the package.
   1.2 Place the detached monitor base on the desk.
   1.3 Grasp the monitor with both hands and securely attach 
         the monitor by sliding the monitor neck into the base 
         (Ensure the direction of the base is correct)
2.Connecting signal cable
   2.1 Switch off your computer.
   2.2 Connect the signal cable to the D-SUB or DVI port
         (Optional: T221W) at the rear of the monitor and tighten 
         the connector screws
   2.3 Connect the other end of signal cable to the computers 
         VGA port and tighten the connector screws.
   2.4 Note: Ensure the display setting does not exceed 
         1680*1050, 60Hz.
3.Connecting audio cable (with audio option)
   3.1 Plug the audio cable into the AUDIO port at the rear of 
         the monitor.
   3.2 Plug the other end of the audio cable into the audio 
         port of your computer or other audio source.
Monitor installationPackage contents
Before beginning, ensure that the carton contains the following items:
1. LCD Monitor
2. Monitor Base (the shape of base may vary according to the monitor model)
3. Power Cord (plug may vary according to the electrical standards      for your area) 
4. Analog Signal Cable
5. Digital Signal Cable (optional)
6. Audio Cable (optional)
7. CD-ROM (contains user manual) 
8. Quick Installation Guide
4.Connecting power
   4.1 Plug the female end of the power cord into the 
         POWER port at the rear of the monitor.
   4.2 Plug the male end of the power cord into a power outlet.
5.Switching on
   5.1 Switch on your computer.
 
You should now be able to see the picture. If not , refer to the trouble \
shooting section of 
this guide.
POWERAUDIOD-SUBDVI
  
						

							
- 3 -
Identifying parts and controls
1.The LED light indicates the state of working. During operation, the LE\
D Light is bright 
green. When dormant, the LED Light is orange.
2.The power button       is used to identify the state of power. You can\
 use the power 
button to control on & off.
3.The function keys are used for adjusting all settings. When you need s\
ome adjustment, 
you can achieve the goals by pressing any of the function menus. Details\
 for all the 
function menus are subsequently described.
  
Working with OSD Group
You will find that the OSD is very easy to use. You can identify the function of a button 
through the corresponding icon displayed on the pop-up window of OSD. No\
w there are 3 
pictures, which show that a button represents different functions in different levels of the 
architecture.
Customizing your Monitor
Important:
Important:
The On Screen Display (OSD) system provides a full range of customizab\
le tools to 
optimize your display.
Although you could perform comprehensive customization, we 
strongly recommend that you use the “AUTO ADJUSTMENT” 
function.
It can utilize the default values to thoroughly optimize the 
performance of the display. Activate the OSD munu.
Select the first button on the left          to activate the “ATUO 
ADJUSTMENT” function.
In addition, we have also prepared other relatively simple methods to change the display modes. There are 4 modes, which include: GENERAL, MOVIE, PICTURE, GAME.
First LevelThird LevelSecond Level
1. Press       button to start.
2. Press any of the rest 4 buttons to activate the OSD menu.
3. Press the corresponding function icon button on the pop-up window of \
the OSD.
      
						

							
- 4 -
Hotkeys Introduction
1.Auto Adjustment
When the OSD functions are displayed, press the first button on the left\
          , and then 
you can automatically optimize the image performance.
2.Volumn Control (Audio matching)
When the OSD functions are displayed, press the first button on the righ\
t         to enter 
the “AUTO ADJUSTMENT” menu. Then press      or      to adjust the volume of sound. 
Press          or           to end.
3.Theme Mode Menu
When the OSD functions are displayed, press the second button on the lef\
t          to shift 
the mode. You may press       and       to make adjustments between 4 modes.
Press       or          , and then you can leave automatically.
4.Main Menu
When the OSD functions are displayed, press the second button on the rig\
ht          to 
enter the main menu. And then press        or       to select the option.
Press          to enter into the option. Press        or          to lea\
ve.
Function Keys Operation
According to the tree-like directory, you can discover the whole OSD system is like a map. 
This tree-like directory can help you to become aware of the whole syste\
m. During the 
whole process, you need to know the following actions. 
1. Activate the OSD main menu: Under the energized condition, press any fun\
ction key to   
execute the function.
2. Confirm the selection: Press the           button.
3. Browse the previous or next option: Press        and       .
4. Adjust the option value: Press       and       to adjust the value.

						

							
- 5 -
OSD Icon List
AUTO ADJUSTMENT
POWER SAVING MODE
INPUT SIGNAL SELECT
BRIGHTNESS
  * Optimize the picture performance automatically.
* Select between Standard and Advanced power saving modes.   See addendum for details.* Standard: Fulfill EPA Energy Star power management requirement* Advanced: Activate monitor Life-Extension fuction
* Adjust the luminance level of the screen.
  * Select the input signal from Analog, and Digital Inputs (Optional).  * Factory default: Analog (VGA)
HORIZONTAL POSITION
VERTICAL POSITION
PHASE
CLOCK
* Shift the screen left or right
• Adjust the monitor internal sampling clock rate
• Shift the screen up or down
• Adjust the monitor internal signal phase
ASPECT RATIO
• Select the display ratio from Native, and Full Screen• Full Screen: adjust and enlarge the display screen to full screen size (16:10)• Native: keep the display format as the input signal (4:3, 5:4, etc), and enlarge the display screen to the maximum w/o losing any content (part of the screen may be blank)
Full Screen (16:10)Native (4:3 or 5:4)
CONTRAST• Adjust the contrast level of the screen.
  * Activate the built-in color engine to enhance the graphic effects according to the different situations of the display. contents
THEME MODE 
OSD MENU LANGUAGE* Select your own preference of language of OSD menu.
       COLOR TEMPERATURE
* Adjust the mechanical specifications regarding the display.(Power Saving Mode, White Balance, Clock, Phase, Horizontal Position, Vertical Position, Information)SYSTEM
* Select the setting of screen color-Cool, Warm or User.* Cool: Select the setting of screen color to be bluish white.* Warm: Select the setting of screen color to be reddish white.
* Adjust the balance of the input signal.WHITE BALANCE(Optional: T221W)
    
						

							
- 6 -
* Show the frequency, resolution, input interface and other   operating details about this display.INFORMATION
DEMO
RECALL* Reset monitor parameters back to factory preset values.
* 2 seconds after activation of this function, some of the   menus will stimulate feature-grading effects 2 times over.
OSD Icon List
DDC/CI* Select turn on or turn off DDC/CI function* Factory default: on
  
						

							
- 7 -
Troubleshooting
1. Check if the monitor is turned on (press the button         again).\
 
2. Check if the power cord is properly connected to the monitor and powe\
r outlet.
3 .Check if there is electricity coming from the power outlet (use anot\
her device to check for power).
1 Check if your computer is turned on.
2 Ensure the computer is not in power saving mode (move the mouse or pr\
ess a key on the keyboard 
   to wake up the computer).
3 Check if the video signal cable is properly connected to the monitor a\
nd computer.
SymptomCheck Items
1 Check if your computer is turned on.
2 Check if the video signal cable is properly connected to the monitor a\
nd computer.
1. Ensure that the resolution and/or refresh rate is set correctly.
1.No picture
2.LED indicator is not lit.
1.No picture
2.LED indicator is orange
1.Picture shows “ NO SIGNAL INPUT ”
1.Picture shows “ INPUT SIGNAL OUT OF RANGE ”
ImportantMake sure your display setup is under WSXGA 1680*1050,60Hz