BenQ T221w User Manual

22 wide LCD Monitor
User Manual
English
Português
Pyccкий
Deutsch
Français
Italiano
Español
Česky
Magyar
Română
SvenskaSuomi
Nederlands
Polski
日本语
简中
繁中
Hrvatski
Norsk
Dansk
  

PRECAUTIONS
   Information for users applicable in European Union countries1
   Information for users applicable in United States of America1
   Installation1
   Power connection1
   Maintenance1
Transporting the monitor1
GETTING STARTED
   Package contents  2
   Monitor installation2
   Identifying parts and controls3
Customizing your Monitor
3
3
   Introduction to Hotkeys4
   OSD icon list5
Troubleshooting7
Technical Features and Specifications
   Interface Frequency8
Addendum
Advanced Power Saving...

Congratulations!
The  display  you  have  just  purchased  carries  the 
TCO’03  Displays  label.  This  means  that  your 
display  is  designed,  manufactured  and  tested 
according  to  some  of  the  strictest  quality  and 
environmental  requirements  in  the  world.  This 
makers for a high performance product, designed with the user in focus that also 
minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
Good visual ergonomics and...

- 1 -
PRECAUTIONS
Transporting the monitor
1.When carrying the display to repair or check it, please press the rou\
nd button behind 
the support, remove the base, and then use the original carton and packi\
ng materials 
to wrap the display and its accessories.
5.Disconnect the power cable from the power supply if:
5.1 You will not use the monitor for an extended period.
5.2 The cable is damaged or frayed.
5.3 The monitor has been dropped or the cabinet damaged.
5.4 A distinct change in performance...

- 2 -
GETTING STARTED
1.Setting up the monitor
   1.1 Take out the monitor and monitor base from the package.
   1.2 Place the detached monitor base on the desk.
   1.3 Grasp the monitor with both hands and securely attach 
         the monitor by sliding the monitor neck into the base 
         (Ensure the direction of the base is correct)
2.Connecting signal cable
   2.1 Switch off your computer.
   2.2 Connect the signal cable to the D-SUB or DVI port
         (Optional: T221W) at the rear of the...

- 3 -
Identifying parts and controls
1.The LED light indicates the state of working. During operation, the LE\
D Light is bright 
green. When dormant, the LED Light is orange.
2.The power button       is used to identify the state of power. You can\
 use the power 
button to control on & off.
3.The function keys are used for adjusting all settings. When you need s\
ome adjustment, 
you can achieve the goals by pressing any of the function menus. Details\
 for all the 
function menus are subsequently...

- 4 -
Hotkeys Introduction
1.Auto Adjustment
When the OSD functions are displayed, press the first button on the left\
          , and then 
you can automatically optimize the image performance.
2.Volumn Control (Audio matching)
When the OSD functions are displayed, press the first button on the righ\
t         to enter 
the “AUTO ADJUSTMENT” menu. Then press      or      to adjust the volume of sound. 
Press          or           to end.
3.Theme Mode Menu
When the OSD functions are displayed, press the...

- 5 -
OSD Icon List
AUTO ADJUSTMENT
POWER SAVING MODE
INPUT SIGNAL SELECT
BRIGHTNESS
  * Optimize the picture performance automatically.
* Select between Standard and Advanced power saving modes.   See addendum for details.* Standard: Fulfill EPA Energy Star power management requirement* Advanced: Activate monitor Life-Extension fuction
* Adjust the luminance level of the screen.
  * Select the input signal from Analog, and Digital Inputs (Optional).  * Factory default: Analog (VGA)
HORIZONTAL POSITION...

- 6 -
* Show the frequency, resolution, input interface and other   operating details about this display.INFORMATION
DEMO
RECALL* Reset monitor parameters back to factory preset values.
* 2 seconds after activation of this function, some of the   menus will stimulate feature-grading effects 2 times over.
OSD Icon List
DDC/CI* Select turn on or turn off DDC/CI function* Factory default: on
  

- 7 -
Troubleshooting
1. Check if the monitor is turned on (press the button         again).\
 
2. Check if the power cord is properly connected to the monitor and powe\
r outlet.
3 .Check if there is electricity coming from the power outlet (use anot\
her device to check for power).
1 Check if your computer is turned on.
2 Ensure the computer is not in power saving mode (move the mouse or pr\
ess a key on the keyboard 
   to wake up the computer).
3 Check if the video signal cable is properly connected...