BenQ Projector SX914 User Manual

Operation 41
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected and the projector model you are using.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Keystone
Position
Phase
H. Size
Digital Zoom
3D3D ModeAuto/Top Bottom/Frame 
Sequential/Frame Packing/Side by 
Side/Off
3D Sync Invert Disable/Invert
Teaching 
TemplateBlackboardOff/Letter...

Operation 42
Main menu Sub-menu Options
4. 
SYSTEM 
SETUP: 
Basic
Presentation 
TimerTimer Period 1~240 minutes
Timer DisplayAlways/3 min/2 min/1 min/
Never
Timer PositionCenter/Top-Left/Top-Right/
Bottom-Right/Bottom-Left
Timer Counting 
DirectionCount Down/Count Up
Sound Reminder On/Off
On/Off
Language
Projector InstallationFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Menu SettingsMenu Display 
Time5 sec/10 sec/20 sec/30 sec/
Always
Menu PositionCenter/Top-Left/Top-Right/...

Operation 43
Main menu Sub-menu Options
5. 
SYSTEM 
SETUP: 
Advanced
High Altitude Mode On/Off
Audio SettingsSRS On/Off
Mute On/Off
Volume
Microphone Volume
Power On/Off 
Ring ToneOn/Off
Lamp SettingsLamp Mode Normal/Economic
Reset Lamp Timer
Equivalent Lamp Hour
Security 
SettingsChange Password
Change Security 
SettingsPower On Lock
Web Control Lock
Baud Rate2400/4800/9600/14400/19200/
38400/57600/115200
Test Pattern On/Off
Closed CaptionClosed Caption 
EnableOn/Off
Caption Version CC1/CC2/CC3/CC4...

Operation 44Note that the menu items are available when the projector detects at least one valid signal. 
If there is no equipment connected to the projector or no signal detected, limited menu 
items are accessible.
Main menu Sub-menu Options
5. 
SYSTEM 
SETUP: 
AdvancedNetwork 
SettingsWired LANStatus
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Wireless LANStatus
SSID
SSID Display
IP Address
Connection Mode
Apply
Remote DesktopAccount
Password
Connect
Projection Log In 
CodeOn/Off...

Operation 45
Description of each menu
Function Description
Wall ColorCorrects the projected picture’s color when the projection surface is 
not white. See Using Wall Color on page 31 for details.
Aspect RatioThere are several options to set the images aspect ratio depending on 
your input signal source. See Selecting the aspect ratio on page 29 
for details.
KeystoneCorrects any keystoning of the image. See Correcting keystone on 
page 23 for details.
Position
Displays the position adjustment page. To...

Operation 46
Function Description
Picture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See Selecting a 
picture mode on page 31 for details.
Reference 
ModeSelects a picture mode that best suits your need for the image quality 
and further fine-tune the image based on the selections listed on the 
same page below. See Setting the User 1/User 2 mode on page 31 
for details.
BrightnessAdjusts the brightness of the image. See...

Operation 47
Function Description
Quick Auto 
SearchSee Switching input signal on page 27 for details.
Color Space 
ConversionSee Changing Color Space on page 27 for details.
Presentation 
TimerReminds the presenter to finish the presentation within a certain time 
frame. See Setting the presentation timer on page 34 for details.
LanguageSets the language for the On-Screen Display (OSD) menus. See Using 
the menus on page 24 for details.
Projector 
InstallationThe projector can be installed on a ceiling...

Operation 48
Function Description
Operation 
Settings
Direct Power On
Allows the projector to turn on automatically once the power is fed 
through the power cord.
Signal Power On
Sets whether to turn the projector directly on without pressing 
POWER or ON when the projector is in standby mode and the signal 
is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is 
detected after a set period of time. See Setting Auto Power Off on 
page 53 for...

Operation 49
Function Description
High 
Altitude 
ModeA mode for operation in high altitude areas. See Operating in a high 
altitude environment on page 36 for details.
Audio 
SettingsSee Adjusting the sound on page 37 for details.
Lamp 
Settings
Lamp Mode
See Setting Lamp Mode as Economic on page 53 for details.
Reset Lamp Timer
See Resetting the lamp timer on page 56 for details.
Equivalent Lamp Hour
See Getting to know the lamp hour on page 53 for details on how the 
total lamp hour is calculated....

Operation 50
 
Function Description
Standby 
Settings
Network
Selecting On enables the function. The projector is able to provide the 
network function when it is in standby mode.
Microphone
Selecting On enables the function. The projector can output the 
microphone signal when it is in standby mode and all the necessary 
equipment is correctly connected. See Playing sound through the 
projector on page 19 for details.
Monitor Out
Selecting On enables the function. The projector can output a VGA 
signal...