BenQ Projector SX914 User Manual
Have a look at the manual BenQ Projector SX914 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operation 41 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. Main menu Sub-menu Options 1. DISPLAY Wall ColorOff/Light Yellow/Pink/Light Green/Blue/Blackboard Aspect Ratio Auto/Real/4:3/16:9/16:10 Keystone Position Phase H. Size Digital Zoom 3D3D ModeAuto/Top Bottom/Frame Sequential/Frame Packing/Side by Side/Off 3D Sync Invert Disable/Invert Teaching TemplateBlackboardOff/Letter Formation/Worksheet/ Coordinate Chart WhiteboardOff/Letter Formation/Worksheet/ Coordinate Chart 2. PICTURE Picture ModeDynamic/Presentation/sRGB/Cinema/3D/User 1/ User 2 Reference Mode Dynamic/Presentation/sRGB/Cinema/3D Brightness Contrast Color Tint Sharpness Brilliant Color On/Off Color Temperature Cool/Normal/Warm Color Temperature Fine TuningR Gain/G Gain/B Gain/R Offset/G Offset/B Offset 3D Color ManagementPrimary Color R/G/B/C/M/Y Hue Saturation Gain Reset Picture Settings Current/All/Cancel 3. SOURCEQuick Auto Search On/Off Color Space Conversion Auto/RGB/YUV
Operation 42 Main menu Sub-menu Options 4. SYSTEM SETUP: Basic Presentation TimerTimer Period 1~240 minutes Timer DisplayAlways/3 min/2 min/1 min/ Never Timer PositionCenter/Top-Left/Top-Right/ Bottom-Right/Bottom-Left Timer Counting DirectionCount Down/Count Up Sound Reminder On/Off On/Off Language Projector InstallationFront Table/Rear Table/Rear Ceiling/Front Ceiling Menu SettingsMenu Display Time5 sec/10 sec/20 sec/30 sec/ Always Menu PositionCenter/Top-Left/Top-Right/ Bottom-Right/Bottom-Left Reminder MessageOn/Off Operation SettingsDirect Power On On/Off Signal Power On On/Off Auto Power OffDisable/3 min/10 min/15 min/20 min/25 min/30 min Quick Cooling On/Off Instant Restart On/Off Blank TimerDisable/5 min/10 min/15 min/20 min/25 min/30 min Sleep TimerDisable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/12 hr Remote Receiver Front+Rear/Front/Rear Panel Key Lock On/Off Background Color Black/Blue/Purple/BenQ Splash Screen Black/Blue/BenQ
Operation 43 Main menu Sub-menu Options 5. SYSTEM SETUP: Advanced High Altitude Mode On/Off Audio SettingsSRS On/Off Mute On/Off Volume Microphone Volume Power On/Off Ring ToneOn/Off Lamp SettingsLamp Mode Normal/Economic Reset Lamp Timer Equivalent Lamp Hour Security SettingsChange Password Change Security SettingsPower On Lock Web Control Lock Baud Rate2400/4800/9600/14400/19200/ 38400/57600/115200 Test Pattern On/Off Closed CaptionClosed Caption EnableOn/Off Caption Version CC1/CC2/CC3/CC4 Standby SettingsNetwork On/Off Microphone On/Off Monitor Out On/Off Audio Pass ThroughOff/Computer 1/Computer 2/ Video, S-Video, YPbPr/HDMI 1/HDMI 2/Network Display/ USB Display
Operation 44Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. Main menu Sub-menu Options 5. SYSTEM SETUP: AdvancedNetwork SettingsWired LANStatus DHCP IP Address Subnet Mask Default Gateway DNS Server Apply Wireless LANStatus SSID SSID Display IP Address Connection Mode Apply Remote DesktopAccount Password Connect Projection Log In CodeOn/Off BroadcastingBroadcasting Channel IP Address AMX Device DiscoveryOn/Off MAC Address Reset All Settings 6. INFORMA TION Current System Status• Source • Picture Mode • Resolution • Lamp Mode • 3D Format • Color System • Equivalent Lamp • Firmware Version
Operation 45 Description of each menu Function Description Wall ColorCorrects the projected picture’s color when the projection surface is not white. See Using Wall Color on page 31 for details. Aspect RatioThere are several options to set the images aspect ratio depending on your input signal source. See Selecting the aspect ratio on page 29 for details. KeystoneCorrects any keystoning of the image. See Correcting keystone on page 23 for details. Position Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. This function is only available when a PC signal (analog RGB) is selected. Phase Adjusts the clock phase to reduce image distortion. This function is only available when a PC signal (analog RGB) is selected. H. SizeAdjusts the horizontal width of the image. This function is only available when a PC signal (analog RGB) is selected. Digital ZoomMagnifies or reduces the projected image. See Magnifying and searching for details on page 29 for details. 3D This projector features a 3D function which enables you to enjoy the 3D movies, videos, and sporting events in a more realistic way by presenting the depth of the images. You need to wear a pair of 3D glasses to view the 3D images. 3D Mode The default setting is Auto and the projector automatically chooses an appropriate 3D format when detecting 3D contents. If the projector cannot recognize the 3D format, press / to choose a 3D mode. When the 3D function is on: • The brightness level of the projected image will decrease. • The Picture Mode cannot be adjusted. 3D Sync Invert When you discover the inversion of the image depth, enable this function to correct the problem. Teaching Template See Using the teaching templates on page 39 for details. 1. DISPLAY menu
Operation 46 Function Description Picture ModePre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See Selecting a picture mode on page 31 for details. Reference ModeSelects a picture mode that best suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See Setting the User 1/User 2 mode on page 31 for details. BrightnessAdjusts the brightness of the image. See Adjusting Brightness on page 32 for details. ContrastAdjusts the degree of difference between dark and light in the image. See Adjusting Contrast on page 32 for details. Color Adjusts the color saturation level -- the amount of each color in a video image. See Adjusting Color on page 32 for details. This function is only available when a Video, S-Video or Component Video signal is selected. Tint Adjusts the red and green color tones of the image. See Adjusting Tint on page 32 for details. This function is only available when a Video or S-Video signal is selected and the system format is NTSC. Sharpness Adjusts the image to make it look sharper or softer. See Adjusting Sharpness on page 32 for details. This function is only available when a Video, S-Video or Component Video signal is selected. Brilliant ColorSee Adjusting Brilliant Color on page 32 for details. Color TemperatureSee Selecting a Color Temperature on page 32 for details. Color Temperature Fine Tuning See Setting a preferred color temperature on page 33 for details. 3D Color ManagementSee 3D Color Management on page 33 for details. Reset Picture SettingsSee Resetting current or all picture modes on page 34 for details. 2. PICTURE menu
Operation 47 Function Description Quick Auto SearchSee Switching input signal on page 27 for details. Color Space ConversionSee Changing Color Space on page 27 for details. Presentation TimerReminds the presenter to finish the presentation within a certain time frame. See Setting the presentation timer on page 34 for details. LanguageSets the language for the On-Screen Display (OSD) menus. See Using the menus on page 24 for details. Projector InstallationThe projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See Choosing a location on page 14 for details. Menu Settings Menu Display Time Sets the length of time the OSD will remain active after your last key press. Menu Position Sets the On-Screen Display (OSD) menu position. Reminder Message Sets the reminder messages on or off. 3. SOURCE 4. SYSTEM SETUP: Basic menu
Operation 48 Function Description Operation Settings Direct Power On Allows the projector to turn on automatically once the power is fed through the power cord. Signal Power On Sets whether to turn the projector directly on without pressing POWER or ON when the projector is in standby mode and the signal is feed through the VGA cable. Auto Power Off Allows the projector to turn off automatically if no input signal is detected after a set period of time. See Setting Auto Power Off on page 53 for details. Quick Cooling Enables or disables the Quick Cooling function. Selecting On enables the function and projector cooling time will be shortened from a normal 90-second duration to approximately 15 seconds. This function is only available when Instant Restart is off. Instant Restart Selecting On enables you to restart the projector immediately within 90 seconds after turning it off. Blank Timer Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See Hiding the image on page 36 for details. Sleep Timer Sets the auto-shutdown timer. Remote ReceiverAllows you to enable all the remote receivers or one specific remote receiver on the projector. Panel Key LockDisables or enables all panel key functions except POWER on the projector and keys on the remote control. See Locking control keys on page 36 for details. Background ColorSets the background color for the projector. Splash ScreenAllows you to select which logo screen will appear during projector start-up. 4. SYSTEM SETUP: Basic menu
Operation 49 Function Description High Altitude ModeA mode for operation in high altitude areas. See Operating in a high altitude environment on page 36 for details. Audio SettingsSee Adjusting the sound on page 37 for details. Lamp Settings Lamp Mode See Setting Lamp Mode as Economic on page 53 for details. Reset Lamp Timer See Resetting the lamp timer on page 56 for details. Equivalent Lamp Hour See Getting to know the lamp hour on page 53 for details on how the total lamp hour is calculated. Security Settings Change Password You will be asked to enter the current password before changing to a new one. See Utilizing the password function on page 25 for details. Change Security Settings Power On Lock See Utilizing the password function on page 25 for details. Web Control Lock See BenQ Network Projector Operation Guide for details. Baud Rate Selects a baud rate that is identical with your computer’s so that you can connect the projector using a suitable RS-232 cable and update or download the projector’s firmware. This function is intended for qualified service personnel. Test PatternSee Using the test pattern on page 38 for details. Closed Caption Closed Caption Enable Activates the function by selecting On when the selected input signal carries closed captions. • Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as CC in TV listings). Caption Version Selects a preferred closed captioning mode. To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language in your area). 5. SYSTEM SETUP: Advanced menu
Operation 50 Function Description Standby Settings Network Selecting On enables the function. The projector is able to provide the network function when it is in standby mode. Microphone Selecting On enables the function. The projector can output the microphone signal when it is in standby mode and all the necessary equipment is correctly connected. See Playing sound through the projector on page 19 for details. Monitor Out Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER 1 jack is correctly connected to devices. See Connection on page 18 for how to make the connection. Audio Pass Through The projector can play sound when it is in standby mode and the corresponding jacks are correctly connected to devices. Press / to choose the source that you wish to use. See Connection on page 18 for how to make the connection. Enabling this function slightly increases the standby power consumption. Network Settings Wired LAN Wireless LAN Remote Desktop Projection Log In Code Broadcasting See BenQ Network Projector Operation Guide for details. AMX Device Discovery When AMX Device Discovery is On, the projector can be detected by AMX controller. MAC Address Displays the mac address for this projector. Reset All SettingsReturns all settings to the factory preset values. The following settings will still remain: Position, Phase, H. Size, Projector Installation, Color Space Conversion, High Altitude Mode, Security Settings, Baud Rate and Network Settings. 5. SYSTEM SETUP: Advanced menu