BenQ Projector SH963 User Manual

  41
  Using the projector
EnglishDisplaying more than one image source 
simultaneously
Your projector is capable of displaying pictures simultaneously from two input sources, which can be used 
to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly 
connected to the projector.
To display the PIP window:
1. Press MENU/EXIT and then press  /  until the Display menu is 
highlighted.
2. Press  to highlight PIP and press ENTER. The PIP page is 
displayed.
3....

42 Using the projector  
EnglishTurning the projector off
To turn the projector off, press POWER ( ) on the projector or 
OFF   on the remote control and a warning message appears. 
Press POWER/OFF ( ) again.
•  The Power indicator light flashes orange and the fans run for 
about two minutes to cool the lamp. The projector will not 
respond to any commands until the cooling process is complete.
•  Then, the Power indicator light is a steady orange once the 
cooling process has finished and fans stop.
•...

  43
  Using the projector
EnglishOn-Screen Display (OSD) menus
On-Screen Display (OSD) structure
Please note that the on-screen display (OSD) menus vary according to the signal type selected.
Main menuSub-menuOptions
Picture -- 
Basic
Picture Mode Cinema/Dynamic/Presentation/sRGB/User 1/User 2
Load Settings From
Brightness 0–100
Contrast 0–100
Color 0–100
Tint -20–+20
Sharpness 0–8
Reset Picture Settings Reset/Cancel
Rename User Mode Reset/Cancel
Picture -- 
Advanced
Black Level 0 IRE/7.5 IRE
Clarity...

44 Using the projector  
English
Main menuSub-menuOptions
Display
Aspect Ratio Anamorphic/4:3/Letter Box/Wide/Real
Key s t o n e 2 D  Key s t o n e
Po s i t i o n
Overscan Adjustment 0/1/2/3
Color Space Conversion Auto/RGB/YUV
PIPPIP On/Off
Main Source
HDMI 1/HDMI 2//Video/Component 1/
Component 2/Computer 1/Computer 2
Second Source
Active Window Main/PIP
Po s i t i o nTop-Right/Bottom-Left/Bottom-Right/Top-
Left
Size Large/Small
PC & Component 
YPbPr TuningH. Size -15 ~ +15
Phase -15 ~ +15
Auto
Blank...

  45
  Using the projector
English
Note that the menu items are available when the projector detects at least one valid signal. If there is no 
equipment connected to the projector or no signal detected, limited menu items are accessible.
Main menuSub-menuOptions
Advanced 
Setup
Lamp SettingsLamp ModeDual-Brightest/Dual-Reliable/Single-
Alternative/Single-Eco
Reset Lamp #1 Timer Reset/Cancel
Reset Lamp #2 Timer Reset/Cancel
Equivalent Lamp #1 Hour 
Equivalent Lamp #2 Hour
HDMI Settings HDMI FormatAuto
PC...

46 Using the projector  
EnglishPicture -- Basic menu
Picture -- Advanced menu
FunctionDescription
Picture Mode
Pre-defined picture modes are provided so you can optimize your projector 
picture set-up to suit your program type. See Selecting a preset mode on 
page 27 for details.
Load Settings From
Selects a preset mode that most suits your need for the picture quality and 
further fine-tune the picture based on the selections listed below. See Setting 
the User 1/User 2 mode on page 28 for details....

  47
  Using the projector
EnglishDisplay menu
FunctionDescription
Aspect Ratio
There are several options to set the picture’s aspect ratio depending on your 
input source. See Selecting the aspect ratio on page 33 for details.
Key s t o n eCorrects any keystoning of the picture. See Correcting picture distortion on 
page 26 for details.
Po s i t i o n
Displays the position adjustment page. To move the projected picture, use the 
directional arrow keys. The values shown on the lower position of the page...

48 Using the projector  
EnglishSystem Setup menu
FunctionDescription
Language
Sets the language for the On-Screen Display (OSD) menus. See Using the 
menus on page 22 for details.
Splash ScreenAllows you to select which logo screen will be displayed during projector start-
up. You can choose BenQ logo screen, Blue screen or Black screen.
Projector PositionThe projector can be installed on a ceiling or behind a screen, or with one or 
more mirrors. See Choosing a location on page 12 for details....

  49
  Using the projector
English
Closed Caption
Closed Caption Enable
Activates the function by selecting On when the selected input signal carries 
closed captions.
•  Captions: An on-screen display of the dialogue, narration, and sound effects 
of TV programs and videos that are closed captioned (usually marked as 
CC in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select CC1, 
CC2, CC3, or CC4 (CC1 displays captions in the primary language in your...

50 Using the projector  
EnglishAdvanced Setup menu
Information menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments 
are not shown on the screen.
FunctionDescription
Lamp Settings
Lamp Mode
Selects the projector lamp power among Dual-Brightest, Dual-Reliable and 
Single-Alternative modes. See Setting the lamp mode on page 36 for details.
Reset Lamp #1 Timer/Reset Lamp #2 Timer...