BenQ Projector SH963 User Manual

  31
  Using the projector
EnglishSetting a preferred color temperature
To set a preferred color temperature:
1. Highlight Color Temperature and select User 1, User 2, or User 3 by pressing  /  on the 
projector or remote control.
2. Press  to highlight Color Temperature User_ Fine Tuning and press ENTER. The Color 
Temperature User_ Fine Tuning page is displayed.
The menu name User_ corresponds with the setting selected in Color Temperature.
3. Press  /  to highlight the item you want to change and...

32 Using the projector  
EnglishColor Management
In most installation situations, color management will not be necessary, such as in classroom, meeting 
room, or lounge room situations where lights remain on, or where building external windows allow 
daylight into the room. 
Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or 
home theaters, should color management be considered. Color management provides fine color control 
adjustment to allow for...

  33
  Using the projector
EnglishSetting 3D Comb Filter
This feature separates composite signal to Y (brightness) signal and C (color) signal, and can help produce 
clearer and sharper images with correct colors in place.
This function is only available when a Video signal is selected
Selecting the aspect ratio
The aspect ratio is the ratio of the image width to the image height. Digital TV is usually in 16:9 ratio, 
which is the default for this projector, and most analog TV signals and DVDs are in 4:3...

34 Using the projector  
English3.Letter Box (LB): Scales a picture to fit the projector’s native 
resolution in its horizontal width and resize the picture’s height to the 
3/4 of the projection width. This may produce a picture greater in 
height than can be displayed, so part of the picture is lost (not 
displayed) along the top and bottom edges of the projection. This is 
suitable for the display of movies which are presented in letter box 
format (with black bars on the top and bottom).
4.Wide:...

  35
  Using the projector
EnglishHiding the image
In order to draw the audiences full attention to the presenter, you can 
use ECO BLANK to hide the screen image. When this function is 
activated with an audio input connected, the audio can still be heard.
You can set the blank time in the 
Display > Blank Timer menu to let 
the projector return the image automatically after a period of time when 
there is no action taken on the blank screen. The length of time can be 
set from 5 to 30 minutes in...

36 Using the projector  
EnglishAdjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have 
made a correct connection to the projector audio input. See Connecting to video equipment on 
page 17 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1. Press MENU/EXIT to open the OSD menu and press  /  to highlight the Advanced Setup 
menu.
2. Press  to highlight Audio Settings and press ENTER. The Audio...

  37
  Using the projector
English•  If one lamp fails, the projector enters Single-Alternative mode automatically. Dual-Brightest, Dual-
Reliable and 
Single-Eco settings are not available.
•  After switching from Dual-Brightest/Dual-Reliable mode to Single-Alternative/Single-Eco mode or vice 
versa, wait for 90 seconds before you can adjust the lamp mode again.
•  A slight variation in the picture brightness and colors may be observed during the very short time of 
switching lamp modes.
Controlling the...

38 Using the projector  
EnglishControlling the projector remotely through a web browser
Once you have the correct IP address for the projector and the projector is on or in standby mode, you 
can use any computer that is on the same local area network to control the projector.
1. Enter the address of the projector in the address bar of your browser and click Go.
2. The remote network operation page opens. This page allows you to operate the projector as if you 
were using the remote control or control...

  39
  Using the projector
EnglishThe tools page allows you to manage the projector, configure the LANcontrol settings and secure access 
of remote network operation on this projector.
i.You can name the projector, keep track of its location and the person in charge of it.
ii. You can adjust the LAN Control Settings.
iii. Once set, access to the remote network operation on this projector has been password-
protected.
iv. Once set, access to the tools page has been password-protected.
After making the...

40 Using the projector  
EnglishThe info page displays the information and status of this projector.
For more information, visit http://www.crestron.com & www.crestron.com/getroomview.
Operating in a high altitude environment
We recommend that you activate High Altitude Mode when your environment is higher than 1500 
meters (around 4920 feet) above sea level, or whenever the projector will be used for extended periods 
of time (>10 hours) without shutdown.
To activate High Altitude Mode:
1. Press...