BenQ Projector MX768 User Manual

Operation51 i. These buttons function the same as the ones on the remote control. See 
Remote control on page 13 for details.
The Display Setting page allows you to operate the projector as if  you were using the 
OSD menus. These functions are some useful  menu settings.
The Picture Setting page allows you to manage the projector as if  you were using the 
PICTURE menu. 

Operation 52The Information page displays the information and status of this projector.
The Conference Control page allows you to control computer’s display status of all the 
computers linked to this projector. 

Operation53 The Crestron page is only available when you are  on a Wired LAN network. It also allows 
you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9.
i. These buttons function the same as the ones on the OSD menus or remote 
control. See 2. PICTURE on page 68 and Remote control on page 13 for 
details.
The Menu button can also be used to go back to previous OSD menu, exit and save menu 
settings.
ii. To switch input source, click on your desired signal.
iii. You can...

Operation 54i. You can name the projector, keep track of its location and the person in charge 
of it.
ii. You can adjust the Wired LAN settings.
iii. Once set, access to the remote network operation on this projector has been 
password-protected.
iv. Once set, access to the tools page has been password-protected.
After making the adjusents, press the Send button and the data will be saved in the projector.
v. P re s s  exit to go back to the Crestron remote network operation page.
The info page displays...

Operation55 The Admin page allows you to enter Basic, Wired LAN, Wireless LAN and Mail pages 
once the password is entered. The default password is “0000”. If you want to change the 
password, please enter Basic page.
The Basic page allows you to change the password and select connected persons. The 
number of connected persons may affect the network display performance. 

Operation 56The Wired LAN page allows you to adjust the Wired LAN settings.
The Wireless LAN page allows you to adjust the Wirless LAN settings.
Max. length for SSID string is 16 bytes. Please use a different SSID when more than two 
projectors are connecting through wireless LAN. 

Operation57 The Mail page allows you to send alert e-mail to your ITS administrator.
You can first try the Mail Test function to check if the Alert Mail works.
Using the Web Control Lock
This function is designed to prevent unauthorized people from maliciously changing the 
projector settings through the Projector Network Display System. 
To enable the function:
1. After your computer is connected to the projector, enter the address of the 
projector in the address bar of your browser and press Enter.
2....

Operation 581. Go to the SYSTEM SETUP: Advanced > Security Settings > Change 
Security Settings menu after opening the OSD menu system. Press MODE/
ENTER. The message “INPUT PASSWORD” appears. Enter the current password. 
If the password is correct, the OSD menu returns to the Security Settings page. 
Press  to select Web Control Lock and press  /  to select On or Off.
Displaying image through Q Presenter
The Q Presenter is an application running on the host PC. It connects to an available 
network...

Operation59 ii. Projectors linked in the LAN will be found. Then select the projector you want 
to link.
iii. Click “Connect”. Then you should be able to see the image on projector.
iv. You can click to disconnect all connected projectors..
The Special Feature page allows you to have some advanced functions to manage the 
display image on your projector.
i. Full Screen: whole image display on the projector. Selectable: a square will pop-
up then you can move and drag the area you want to show the...

Operation 60appers on th eprojector. You can change th elocation anytime you want, even 
back to full screen or blank out.
The Basic and Advanced Settings pages allow you to configure the Q Presenter.
i. You can select whether to activate Remote Desktop function. If the Remote 
Desktop function is activated, you can change the Name and  Password. If it isn’t 
activated, the Name and Password will be gray out. 
ii. You can set the name and password of the connected computer. The Name must 
be eight...