BenQ Projector MX726 User Manual

Operation51
Description of each menu
FUNCTIONDESCRIPTION 
1. Display menu
Wall colorCorrects the projected picture’s color when the projection surface is 
not white. See Using Wall Color on page 36 for details.
Aspect RatioThere are several options to set the images aspect ratio depending 
on your input signal source. See Selecting the aspect ratio on page 
34 for details.
2D KeystoneAdjusts the shape of the projected image to ensure straight lines on 
all four corners. See Correcting 2D Keystone on page...

Operation 52
1. Display menu
3D
This projector features a 3D function which enables you to enjoy the 
3D movies, videos, and sporting events in a more realistic way by 
presenting the depth of the images. You need to wear a pair of 3D 
glasses to view the 3D images.
3D Mode
The default setting is Auto and the projector automatically chooses 
an appropriate 3D format when detecting 3D contents. If the 
projector cannot recognize the 3D format, press ◄/► to choose a 
3D mode.
When the 3D function is on:...

Operation53
2. Picture menu
Picture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See Selecting a 
picture mode on page 36 for details.
Reference 
ModeSelects a picture mode that most suits your need for the image 
quality and further fine-tune the image based on the selections listed 
on the same page below. See Setting the User 1/User 2 mode on 
page 37 for details.
BrightnessAdjusts the brightness of the image. See Adjusting...

Operation 54
4. System Setup: Basic menu
Presentation 
TimerReminds the presenter to finish the presentation within a certain 
time frame. See Setting the presentation timer on page 40 for details.
LanguageSets the language for the On-Screen Display (OSD) menus. 
See Using the menus on page 29 for details.
Projector 
Installation The projector can be installed on a ceiling or behind a screen, or with 
one or more mirrors. See Choosing a location on page 19 for 
details.
Menu Setting
Menu display time...

Operation55
4. System Setup: Basic menuRemote 
ReceiverSets the preferred remote receiver (Front and Rear) allowing the 
projector to accept signals from the remote control.
Panel Key 
LockDisables or enables all panel key functions except   POWER on 
the projector and keys on the remote control. See Locking control 
keys on page 42 for details.
Background 
ColorSelects background appearance when there is no signal.
Splash Screen
Allows you to select which logo screen will appear during projector...

Operation 56
5. System Setup: Advanced menu
Security 
Setting
Change password
You will be asked to enter the current password before changing to a 
new one. See Utilizing the password function on page 30 for details.
Change Security Settings
Pow e r  O n  L o c k
When Pow e r  O n  L o c k is activated, you will be asked to enter the 
current password before powering on the projector.
If you enter incorrect password 5 times in succession, the projector 
will automatically shut down in a short time.
Web...

Operation57
5. System Setup: Advanced menu
Standby 
Settings
Network
•Enable Network Standby Mode 
Selecting On enables the function. The projector is able to 
provide the network function in standby mode. Selecting Off 
disables the function. The projector does not provide the 
network function in standby mode.
•Auto Disable Network Standby Mode 
Allows the projector to disable the network function after a set 
period of time after it enters standby mode. For instance, if 20 
min is selected, the...

Operation 58
The Information menu shows you the current operating status of the projector.
5. System Setup: Advanced menu
Network 
settings
Wired LAN
See BenQ Network Projector Operation Guide for details.
Projection Login Code
See BenQ Network Projector Operation Guide for details.
AMX Device Discovery
When AMX Device Discovery is On, the projector can be 
detected by AMX controller.
MAC Address
Displays the mac address for this projector.
Reset All 
Settings
Returns all settings to the factory preset...

Maintenance59
Maintenance
Care of the projector
Your projector needs little maintenance. The only thing you need to do on a regular basis 
is to keep the lens clean.
Never remove any parts of the projector except the lamp. Contact your dealer if other 
parts need replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface. 
• Use a canister of compressed air to remove dust. 
• If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens 
cleaner...

Maintenance 60
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically 
calculated by the built-in timer. The method of calculating the equivalent lamp hour is as 
follows:
See Setting Lamp mode as Economic or SmartEco below for more information on Economic 
mode.
To obtain the lamp hour information:
1. Press MENU/EXIT and then press ◄/► until the SYSTEM SETUP: Advanced 
menu is highlighted.
2. Press ▼ to highlight Lamp...