BenQ Projector MX726 User Manual

Operation41
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging 
function. See Connection on page 22 for details.
You can operate your display software program (on a connected PC) which responds to 
page up/down commands (like Microsoft PowerPoint) by pressing PA G E  + / PA G E  - on the 
remote control.
If remote paging function doesnt work, check if the USB connection is correctly made and 
the mouse driver on your computer is updated to the...

Operation 42
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings 
from being changed accidentally (by children, for example). When the Panel Key Lock is 
on, no control keys on the projector will operate except   POWER.
1. Go to the System Setup: Basic > Panel Key Lock menu, and select On by 
pressing ◄/► on the projector or remote control. A confirmation message appears.
2. Highlight Ye s and press MODE/ENTER to confirm.
To release panel key lock,...

Operation43
Muting the sound
To temporarily turn off the sound,
• Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is off, the screen will 
display   in the upper right corner of the screen.
To restore the sound, press MUTE again.
•Using the OSD menu
1. Press MENU/EXIT and then press ◄/► until the System Setup: Advanced 
menu is highlighted.
2. Press ▼ to highlight Audio Settings and press MODE/ENTER. The Audio 
Settings page displays.
3. Highlight Mute and press ◄/►...

Operation 44
Using the teaching templates
The projector provides several preset patterns for various teaching purposes. To activate 
the pattern:
1. Open the OSD menu and go to the Display > Teaching Template and press ▲/▼ 
to select Blackboard or Whiteboard.
2. Press ◄/► to choose the pattern you need.
3. Press MODE/ENTER to activate the pattern.
Using the quick install
The projector provides a hot key to set Projector Installation, Test Pattern, and 
Keystone quickly.
Press Quick Install on the remote...

Operation45
Shutting down the projector
1. Press  POWER or  OFF and a confirmation message will appear prompting 
you.
If you dont respond in a few seconds, the message will disappear.
2. Press  POWER or  OFF a second time. The POWER indicator light 
flashes orange, the projection lamp shuts down, and the fans will continue to run for 
approximately 90 seconds to cool down the projector.
To protect the lamp, the projector will not respond to any commands during the cooling 
process. To shorten the...

Operation 46
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected. 
Main menu Sub-menu Options
1. 
Display
Wall colorOff/Light Yellow/Pink/Light Green/
Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
2D Keystone
Corner FitTop Left/Top Right/Bottom Left/
Bottom Right
Position
Phase
H.size
Digital zoom PC:1.0X~2.0X; Video: 1.0X~1.8X
3D3D modeAuto/Off/Frame sequential/Frame 
packing/Top bottom/Side by side
3D Sync Invert...

Operation47
2. 
Picture
Picture ModeDynamic/Presentation/sRGB/
Cinema/3D/User 1/User 2
Reference ModeDynamic/Presentation/sRGB/
Cinema/3D
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color On/Off
Color 
Te m p e r a t u r eCool/Normal/Warm
Color 
Temperature Fine 
Tu n i n gR Gain/G Gain/B Gain/
R Offset/G Offset/B Offset
3D Color 
ManagementPrimary Color R/G/B/C/M/Y
Hue
Saturation
Gain
Reset picture 
settingsCurrent/All/Cancel
3. 
SourceQuick Auto Search On/Off
Color Space 
ConversionAuto/RGB/YUV...

Operation 48
4. 
System 
Setup: Basic
Presentation 
TimerTimer Period 1~240 min
Timer Display Always/1 min/2mins/3 mins/Never
Timer PositionTop-Left/Bottom-Left/
Top-Right/Bottom-Right
Timer Counting 
DirectionCount Down/Count up
Sound Reminder On/Off
On Yes/No
Off Yes/No
Language
Projector 
InstallationF r o n t  Ta b l e / R e a r  Ta b l e / R e a r  
Celling/Front Ceiling
Menu SettingMenu Display Time 5 sec/10 sec/20 sec/30 sec/Always
Menu PositionCenter/Top-Left/Top-Right/
Bottom-Right/Bottom-Left...

Operation49
5. 
System 
Setup: 
Advanced
High Altitude 
ModeOn/Off
Audio Settings Mute On/Off
Vo l u m e
Microphone 
Vo l u m e
Power on/off Ring On/Off
Lamp SettingsLamp Mode Normal/Economic/SmartEco
Reset Lamp Timer Yes/No
Equivalent Lamp 
Hour
Security SettingChange Passward
Change Security 
Settings
Power On Lock On/Off
Web Control Lock On/Off
Baud Rate2400/4800/9600/14400/19200/
38400/57600/1152000
Test Pattern On/Off
Closed CaptionClosed Caption 
EnableOn/Off
Caption Version CC1 / CC2 / CC3 / CC4...

Operation 50
Note that the menu items are available when the projector detects at least one valid signal. 
If there is no equipment connected to the projector or no signal detected, limited menu 
items are accessible.
6. 
InformationCurrent System 
Status•Source
•Picture Mode
•Lamp Mode
•Resolution
•3D Format
• Color System
•Equivalent Lamp
• Firmware Version
Main menu Sub-menu Options