BenQ Projector MW529E User Manual

Operation 51
Description of each menu
• The default values listed in this manual, especially on pages 51-59, are 
for reference only. They may vary between the projectors due to the 
continuous improvement to the  products.
FUNCTION DESCRIPTION
Wall ColorCorrects the projected picture’s color when the projection 
surface is not white. See Using Wall Color on page 37 for 
details.
Aspect RatioThere are four options to set the images aspect ratio depending 
on your input signal source. See Selecting the...

Operation
52FUNCTION DESCRIPTION
3D
This projector features a 3D function which enables you to enjoy the 
3D movies, videos, and sporting events in a more realistic way by 
presenting the depth of the images. You need to wear a pair of 3D 
glasses to view the 3D images.
3D mode
The default setting is Auto and the projector automatically 
chooses an appropriate 3D format when detecting 3D contents. 
If the projector cannot recognize the 3D format, press  /  to 
choose a 3D mode.
3D Sync Invert
When you...

Operation 53 FUNCTION DESCRIPTION
Picture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See Selecting 
a picture mode on page 36 for details.
Reference 
ModeSelects a picture mode that best suits your need for the image 
quality and further fine-tune the image based on the selections 
listed on the same page below. See Setting the User 1/User 2 
mode on page 36 for details.
BrightnessAdjusts the brightness of the image. See...

Operation
54FUNCTION DESCRIPTION
Brilliant 
ColorSee Adjusting Brilliant Color on page 37 for details.
Color 
TemperatureSee Selecting a Color Temperature on page 38 for details.
Color 
Temperature 
Fine TuningSee Setting a preferred color temperature on page 38 for 
details.
3D Color 
ManagementSee 3D Color Management on page 38 for details.
Reset Picture 
Settings
See Resetting current or all picture modes on page 39 for 
details.
When Picture Mode is under Bright, choosing Current will 
only reset the...

Operation 55 FUNCTION DESCRIPTION
Presentation 
TimerReminds the presenter to finish the presentation within a certain 
time frame. See Setting the presentation timer on page 40 for 
details.
LanguageSets the language for the On-Screen Display (OSD) menus. See 
Using the menus on page 30 for details.
Projector 
InstallationThe projector can be installed on a ceiling or behind a screen, or 
with one or more mirrors. See Choosing a location on page 17 
for details.
Menu 
Settings
Menu display Time
Sets the...

Operation
56FUNCTION DESCRIPTION
Operation 
Settings
Direct Power On
Selecting On enables the function. See Starting up the projector 
on page 26 for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is 
detected after a set period of time. See Setting Auto Power Off 
on page 62 for details.
Quick Cooling
Selecting On enables the function and the projector cooling time 
will be shortened to a few seconds.
If you attempt to restart the projector right after 
the...

Operation 57 FUNCTION DESCRIPTION
High Altitude 
ModeA mode for operation in high altitude areas. See Operating in a 
high altitude environment on page 43 for details.
Audio 
Settings
Allows you to enter the audio setting menu.
Mute
Sets the mute function.
Volume
Adjusts the audio volume level.
Lamp 
Settings
Lamp Mode
See Setting Lamp mode eco function as Economic or SmartEco 
mode on page 61 for details.
Reset Lamp Timer
See Resetting the lamp timer on page 66 for details.
Equivalent Lamp Hour
See...

Operation
58FUNCTION DESCRIPTION
Closed 
Caption
Closed Caption Enable
Activates the function by selecting On when the selected input 
signal carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and 
sound effects of TV programs and videos that are closed 
captioned (usually marked as CC in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, 
select CC1, CC2, CC3, or CC4 (CC1 displays captions in the 
primary language in your...

Operation 59 FUNCTION DESCRIPTION
Native 
ResolutionShows the native resolution of the projector.
Current 
System 
Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the supported resolution of the input signal.
Lamp Mode
Shows the current lamp mode.
3D Format
Shows the current 3D mode.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp
Displays the number of hours the lamp has been used.
Firmware...

Maintenance
60
Maintenance
Care of the projector
Your projector needs little maintenance. The only thing you need to do on a regular 
basis is to keep the lens and case clean.
Never remove any parts of the projector except the lamp. Contact your dealer if 
other parts need replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface. 
• Use a canister of compressed air to remove dust. 
• If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens...