BenQ Projector MW529E User Manual

Introduction 11
Controls and functions
Projector
7. Volume /Arrow keys ( /  Left, 
/ Right)
Adjusts the sound level. 
When the On-Screen Display (OSD) 
menu is activated, the #7 and #9 keys are 
used as directional arrows to select the 
desired menu items and to make 
adjustments. See Using the menus on 
page 30 for details.
8. ECO BLANK
Used to hide the screen picture. See 
Hiding the image on page 42 for details.
9. Keystone/Arrow keys ( / Up, 
/Down)
Manually corrects distorted images 
resulting from...

Introduction 12
Ceiling mounting the projector
We want you to have a pleasant experience using your BenQ projector, so we 
need to bring this safety matter to your attention to prevent possible damage to 
person and property.
If you intend to mount your projector on the ceiling, we strongly recommend that 
you use a proper fitting BenQ projector ceiling mount kit and that you ensure it is 
securely and safely installed.
If you use a non-BenQ brand projector ceiling mount kit, there is a safety risk that...

Introduction 13
Remote control
1. Info
Showing the status information of the 
projector.
2. Menu/Exit
Turns on the On-Screen Display (OSD) 
menu. Goes back to previous OSD menu, 
exits and saves menu settings.
See Using the menus on page 30 for details.
3. Left/ Right
When the On-Screen Display (OSD) menu 
is activated, the #3 and #12 keys are used 
as directional arrows to select the desired 
menu items and to make adjustments. See 
Using the menus on page 30 for details.4. Mode/Enter
Selects an...

Introduction 1412. Keystone/Arrow keys ( / Up, 
/Down)
Manually corrects distorted images 
resulting from an angled projection. See 
Correcting keystone on page 29 for 
details.
13. Auto
Automatically determines the best 
picture timings for the displayed image. 
See Auto-adjusting the image on page 
28 for details.
14. Source
Displays the source selection bar. See 
Switching input signal on page 33 for 
details.
15. Volume +/-
Adjusts the sound level. See Adjusting 
the sound on page 43 for details.
16....

Introduction 15 Infra-Red (IR) remote control sensor is located on the front of the projector. The 
remote control must be held at an angle within 30 degrees perpendicular to the 
projectors IR remote control sensor to function correctly. The distance between the 
remote control and the sensor should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor 
on the projector that might obstruct the infra-red beam.
Replacing the remote control...

Introduction 16• Dispose of the used battery according to the battery manufacturer’s 
instructions.
• Never throw a battery into a fire. There may be danger of an explosion. 
• If the battery is dead or if you will not be using the remote control for a 
long time, remove the battery to prevent damage to the remote 
control from possible battery leakage. 

Positioning your projector 17
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you 
select. Take into consideration the size and position of your screen, the location of a 
suitable power outlet, as well as the location and distance between the projector and 
the rest of your equipment.
Your projector is designed to be installed in one of four possible installation locations: 
1. Front Table
Select this location with the...

Positioning your projector 18
Obtaining a preferred projected image size
The distance from the projector lens to the screen, the zoom setting (if available), and 
the video format each factors in the projected image size.
Projection dimensions
Refer to Dimensions on page 70 for the center of lens dimensions of this projector 
before calculating the appropriate position. 
MS527E/MX528E
The screen aspect ratio is 4:3 and the projected picture is 4:3
For example, if you are using a 120-inch screen, the...

Positioning your projector 19
MW529E
The screen aspect ratio is 16:10 and the projected picture is 16:10
For example, if you are using a 120-inch screen, the average projection distance is 4239 
mm and with a vertical offset of 202 mm. 
If your measured projection distance is 5.0 m (5000 mm), the closest match in the 
Projection distance (mm) column is 5299 mm. Looking across this row shows that a 150 
(about 4.0 m) screen is required.
All measurements are approximate and may vary from the actual sizes....

Connection 20
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted. 
• In the connections shown below, some cables may not be included with 
the projector (see Shipping contents on page 8). They are 
commercially available from electronics stores.
• For detailed connection methods, see pages 21-25.
• For the combination of an active audio...