BenQ Projector HT2150ST User Manual

  21
  Operation
Selecting an input source
The projector can be connected to multiple equipment at the same time. However, it only displays one 
full screen at a time. When starting up, the projector automatically searches for the available signals.
If you want the projector to always automatically search for the signals:
• Under the  Advanced OSD menu, go to the  System Setup : Basic  menu, and enable Auto 
Source. (see  Auto Source on page 38 )
• Under the  Basic OSD menu, if there’s no signal...

22 Operation  
Adjusting the projected image
Adjusting the projection angle 
The projector is equipped with a quick-release adjuster foot 
and two rear adjuster feet. These adjusters change the image 
height and projection angle. 
To adjust the projection angle:
1. Press the quick-release butto
n and lift the front of the 
projector. Once the image is positioned as desired, release 
the quick-release button to lock the foot in position.
2. Screw the rear adjuster feet to fine-tune the horizontal  angle....

  23
  Operation
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the top or 
bottom. It occurs when the projector  is not perpendicular to the screen. 
To correct this, besides adjusting the height of the  projector, you may correct this manually in ONE of 
these ways:
•  Use the remote control
Press  KEYSTONE to display the  Key s t o n e window.
•  Using the projector Press  /  or  /  to display the  Key s t o n e window.
The illustrations...

24 Menu Functions  
Menu Functions
About the OSD Menus
To let you make various adjustments or settings on the projector and the projected image, the projector 
is equipped with 2 types of multili
ngual On-Screen Display (OSD) menus: 
•  Basic  OSD menu: provides primary menu functions. (See  Using the Basic OSD menu)
•  Advanced  OSD menu: provides full menu functions. (See  Using the Advanced OSD menu)
To access the OSD menu, press  MENU on the projector or remote control. 
The first time you use the...

  25
  Menu Functions
If you intend to switch from the  Basic OSD menu to the Advanced OSD menu, follow the instructions 
below:
Use the arrow keys ( / / / ) on the projector or remo te control to move through the menu items, and 
use OK to confirm the selected menu item.
•  When there is a video signal connected to the projector
i. Go to the  Settings > Menu Type  menu and press  OK.
ii. Use 
/ to select  Advanced  and press OK.
iii. Press  BACK again to access the  Advanced OSD menu.
•  When there is...

26 Menu Functions  
Using the 
Basic OSD menu
Depending on whether or not any video sign al is connected to the projector, the Basic OSD menu offers 
different available functions. 
Check the following links to learn more.
•  Basic OSD menu - with  input signals connected
•  Basic OSD menu - without input signals connected  (limited menus are available)
Basic OSD menu - with input signals connected 
The Basic  OSD menu provides primary menu functions.  Available menu items may vary depending on 
the...

  27
  Menu Functions
Sound Mode
Sound Mode  function utilizes MaxxAudio sound enhancement technology, which 
incorporates Waves’s algorithms to deliver great effects of the bass and treble and 
provide you with immersive cinematic audio experience. The following preset sound 
modes are provided:
 Standard , Cinema , Music , Sport,  Game, and User . 
The  User  mode allows you to personalize the sound settings. Access the  Advanced 
OSD menu and see User EQ  for details.
If the Mute function is...

28 Menu Functions  
Settings
Press 
OK to enter its submenu. 
Press BACK to save your changes and exit.
See below for more details.
•  Wall Color
Enable this function to help correct the projected picture’s color when the projection 
surface is not white. You may choose a color similar to that of the projection surface 
from these options:  Light Yellow, Pink , Light Green , or Blue .
• Projector 
Po s i t i o nThe projector can be installed on a ceiling or behind a screen, or with one or more 
mirrors....

  29
  Menu Functions
Basic OSD menu - without input signals connected
As there’s no input signal to your projector, only the submenus of  Settings under Basic OSD menu - 
with input signals connected are availa ble. Menu options that are not available will become grayed out. 
To access the OSD menu, press  MENU on the projector or remote control.
•  Use the arrow keys ( ///) on the projector or remote control to move through the menu 
items.
• Use  OK on the projector or remote control to confirm the...

30 Menu Functions  
Using the Advanced OSD menu
The 
Advanced  OSD menu offers complete menu functions.
The Advanced OSD menu overview above is for reference only and may differ from the actual design and the 
projector model you are using.
To access the OSD menu, press  MENU on the projector or remote cont rol. It consists of the following 
main menus. Check the links after the menu items below to learn more details.
1. Picture  menu (see page  31)
2. Audio Setup  menu (see page  35)
3. Display  menu...