BenQ Pe6800 Digital Projector Home Theater Users Manual

  21   Menus
Menus
Menu Structure    
PICTURE...
PRO-PICTURE...
INSTALLATION...
ENVIRONMENT...
DISPLAY...
BRIGHTNESS -30..30
CONTRAST -32..31
COLOR -30..30
SHARPNESS                   -5..5
TINT -15..15
FILTERS
                  0..3
RED -15..15
GREEN -15..15
BLUE -15..15
YELLOW -15..15
WHITE    0..10
SOURCE...
SET USER COLORTEMP...
HiBrt
CINEMA
R GAIN                0..512
G GAIN                0..512
B GAIN                0..512
R BIAS                0..90
G BIAS                0..90
B BIAS...

22 Menus  
Using the Menus
The projector is equipped with on-screen display (OSD) menus for making various adjustments and settings.
There are six different menu languages. Refer to see INSTALLATION Menu on page 26 for more details. 
The following example describes the adjustment of the keystone.
PICTURE Menu
These settings can be stored in three separate video memories, in which each can have different parameters for 
different input sources.
There are eleven items in this menu: BRIGHTNESS — CONTRAST —...

  23   Menus
1.BRIGHTNESS: Adjusts the picture brightness to values between 0 and 60. The higher the value, the brighter 
the picture. And lower the setting, darker the picture.
2.CONTRAST: Adjusts the picture contrast to values between 0 and 30. The higher the value, the greater the 
contrast.
3.COLOR: Adjusts the color intensity to values between 0 and 60. The higher the value, the more vivid and 
brighter the color.
4.SHARPNESS: Adjusts the picture sharpness to values between -10 and +10. The higher...

24 Menus  
2.ASPECT: There are five aspect ratios that can be selected for different video signal:
■16:9 : Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. 
■4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio.   
■ZOOM: Enlarges an image with letterbox format to display it in full-screen format with a 16:9 aspect 
ratio. The upper and lower portions of the image are cropped. Use this setting for Cinemascope and...

  25   Menus
3.RGB&COMPONENT: The following settings are only available with a PC or Digital Television RGB signal:
■AUTO: Adjusts the phase, frequency and position automatically.
■FREQ.: Adjusts the frequency of the sampling clock that captures the input signal.
■PHASE: Adjusts the phase of the clock.
■H. POS.: Adjusts the horizontal position of the image.
■V. POS.: Adjusts the vertical position of the image.
The available adjustment range of the vertical position depends on the type of the input signal...

26 Menus  
INSTALLATION Menu
This menu contains items necessary for installation.
There are six items available: LANGUAGE, MIRROR, KEYSTONE, BACKGROUND COLOR, OSD POSITION 
and PATTERN.   
1.LANGUAGE: There are six languages that can be selected for the menus: English, French, German, Italian, 
Traditional Chinese and Korean.
2.MIRROR: The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. 
There are four settings for choice. But the settings are only working with...

  27   Menus
5.OSD POSITION: The position of the On Screen Display can be adjusted in both vertical and horizontal 
directions. 
The available adjustment range of the vertical position depends on the type of the input signal that is being 
displayed. The vertical position cannot be changed with some types of signal.
6.PAT T E R N: It will be displayed with the aspect ratio setting made using the ASPECT function of the 
DISPLAY menu. Use this pattern when installing the projector, even if there is no...

28 Menus  
3.GAMMA: Adjusts the color saturation of mid color tones within the image. Can be used to displayed fine 
detail more clearly under some conditions.
■CINEMA: Suitable for viewing movies in a dark room.
■VIDEO: Suitable for viewing video programs in a dark room.
■PC: Suitable for viewing images from a PC or other computer in a bright room. 

  29   Additional Information
Additional Information
Replacing the Lamp (Contact your BenQ dealer for 
assistance)
CAUTION: The lamp may be very hot. Allow the projector to cool down for 45 minutes before replacing the 
lamp.
1. Turn the power off and disconnect the projector from 
the wall socket. 
2. Use a Phillips screwdriver to loosen the screw (a) 
securing the lamp cover and then remove the cover 
from the projector.
3. Use a Phillips screwdriver to loosen the three screws (b) 
securing the lamp...

30 Additional Information  
Indicators
There are three indicators which show the status of the projector. Check the following for information about the 
indicator lights. If there is anything wrong, turn the projector off and contact your dealer. 
When the projector is in a normal state, ... 
When the projector is in an abnormal state, ... 
POWER LAMP TEMP STATE REMARK
Orange
Off OffStandby mode.
Flashing 
GreenLamp standby mode. Cannot turn the projector off.
Green Power on.
Flashing 
OrangeLamp is...