BenQ Pe6800 Digital Projector Home Theater Users Manual

  11   Overview
Projector Exterior View
Front / Upper Side
Rear / Left Side
Connector Panel
Projection LensFocus Ring and Zoom Ring
Adjusts the focus and zoom of the projection 
lens.
Front IR Sensor
Ventilation Holes (intake)Control Panel
Show lamp status and whether the projector 
is on or off. For more details, see Control 
Panel on page 12.
Connector Panel
For more details, see the description of 
Connector Panel, below.
Front Adjuster button
Adjusts the height or projection angle.
Back IR Sensor...

12 Overview  
Controls and Functions
Control Panel
1. STANDBY/ON (Refer to pages 18, 20 and 30 for 
more information.)
Press this key for ONE second to turn the 
projector on when it is in the standby mode. Or 
press this key twice to turn the unit off.
POWER light
Indicates whether the unit is on or off
QThe orange light shows when the AC power 
cord is plugged into the wall outlet (standby 
mode). Once in the standby mode, you can 
press the STANDBY/ON key on the projector 
or the ON key on the remote...

  13   Overview
 Remote Control
Notes on Remote Control Operation
QMake sure that there is nothing between the remote control and the IR sensor on the projector that 
might obstruct the infrared beam.
QThe effective range of the remote control is up to 8 meters from the front of the projector or 8 meters 
from the rear of the projector. The remote control must be held at an angle within 30 degrees of the 
projector’s IR remote control sensor. MENU
Turns the on-screen display control 
menu on or off....

14 Connecting  
Connecting
When connecting any signal source to the projector, be sure to:
1. Turn off all equipment before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted. 
4. Connect all audio signals to external speakers. This projector is not equipped with speakers.
Connecting Video Inputs
Connecting to DVD players
If the selected video images is not displayed after the projector is turned on and the correct video source has been...

  15
   Setting Up Your Projector
Setting Up Your Projector 
Preparations
1. Remove the lens cap.
2. Turn all of the connected quipment on.
3. Plug the supplied power cord in to the AC inlet on the rear of 
this unit. 
4. Plug the power cord into a wall socket and turn the wall  switch on.
5. Turn on the main power switch at the rear of this unit (next to  the AC inlet). The POWER light will light up in orange. Press 
POWER ON/OFF  key on the remote control or STANDBY/
ON key on the projector for ONE...

16 Setting Up Your Projector  
Setting Up the Screen
Ceiling Installtion for 16 : 9 Screen
Floor Installation for 16 : 9 Screen  
16 : 9 screen size (cm)    
The above numbers are approximate and may be slightly different from the actual measurements.
Screen SizeProjection DistanceHeight (A)
Type (inch) Height Width Min. Max. Tele Wide
50 62 111 181 217 23 21
60 75 133 218 260 27 26
70 87 155 254 303 32 30
80 100 177 290 347 36 34
90 112 199 326 390 41 39
100 125 221 363 433 45 43
110 137 244 399 477 50...

  17   Setting Up Your Projector
Ceiling Installation for 4 : 3 Screen
Floor Installation for 4 : 3 Screen
4 : 3 screen size (cm)  
The above numbers are approximate and may be slightly different from the actual measurements.
Screen SizeProjection DistanceHeight AImage Height
Type (inch) Height Width Min. Max. Tele Wide
50 76 102 167 199 21 20 57
60 91 122 200 239 25 24 69
70 107 142 233 279 29 28 80
80 122 163 266 318 33 32 91
90 137 183 300 358 37 35 103
100 152 203 333 398 42 39 114
110 168 224 366...

18 Basic Operation  
Basic Operation
Tu r n i n g  t h e  P o w e r  o n
Follow the steps below.
1. Make sure the Power light is orange when power is applied 
and the main AC power switch is turned on. 
2. Press and hold the POWER ON/OFF key on the remote 
control or the POWER key on the projector for ONE second 
to turn the projector on. The POWER light will flash orange 
while warming up,  then show a steady green.
3.  Searching…. will be displayed on the screen before the 
projector identifies the...

  19   Basic Operation
Selecting Aspect Ratio
QSelect an aspect ratio to suit the format of the video signal. There are five aspect 
ratios available:
1. 16:9: Scales an image so that it is displayed in the center of the screen with a 16:9 
aspect ratio.
2. 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 
aspect ratio.
3. ZOOM: Enlarges an image with letterbox format to display it in full-screen 
format with a 16:9 aspect ratio. The upper and lower portions of the...

20 Basic Operation  
Picture Quality Adjustment
QWhen you press any of the picture qualty adjustment buttons, the selected 
function is activated. Press e or f to adjust the values. The picture 
quality adjustment can also be made in the PICTURE menu and the Pro-
PICTURE menu. 
QRefer to page 22 and page 27 for more information.
Tu r n i n g  t h e  P o w e r  O f f
Follow the steps below.
1. Press the POWER ON/OFF key on the remote control or the 
STANDBY/ON key on the projector. A message is displayed...