BenQ Pb8260 Users Manual

							Specifications 47
Supported timing for YPbPr input
Supported timing for Video and S-Video inputs
Signal FormatHorizontal 
Frequency (kHz)Vertical Frequency 
(Hz)
480i(525i)@60Hz 15.73 59.94
480p(525p)@60Hz 31.47 59.94
576i(625i)@50Hz 15.63 50.00
576p(625p)@50Hz 31.25 50.00
720p(750p)@60Hz 45.00 60.00
720p(750p)@50Hz 37.50 50.00
1080i(1125i)@60Hz 33.75 60.00
1080i(1125i)@50Hz 28.13 50.00
Video modeHorizontal 
Frequency (kHz)Ve rt i c a l  
Frequency (Hz)Color Sub-
carrier 
Frequency 
(MHz)
NTSC 15.73 60 3.58
PAL 15.63 50 4.43
SECAM 15.63 50 4.25 or 4.41
PAL-M 15.73 60 3.58
PAL-N 15.63 50 3.58
PAL-60 15.73 60 4.43
NTSC4.43 15.73 60 4.43
Downloaded From projector-manual.com BenQ Manuals 
						

							Warranty 48
Warranty
Limited warranty
BenQ warrants this product against any defects in material and workmanship, under 
normal usage and storage. 
Proof of purchase date will be required with any warranty claim. In the event this prod-
uct is found to be defective within the warranty period, BenQ’s only obligation and 
your exclusive remedy shall be replacement of any defective parts (labor included). To 
obtain warranty service, immediately notify the dealer from which you purchased the 
product of any defects.
Important: The above warranty shall be void if the customer fails to operate the prod-
uct in accordance with BenQ’s written instructions, especially the ambient humidity 
must be in-between 10% and 90%, temperature in-between 0
°C and 40°C, altitude lower 
than 10000 feet, and avoiding to operate the projector in a dusty environment
. This war-
ranty gives you specific legal rights, and you may have other rights which vary from 
country to country.
For other information, please refer to BenQ Warranty Information Book.
Downloaded From projector-manual.com BenQ Manuals 
						

							Regulatory statements 49
Regulatory statements
FCC statement
CLASS B: This equipment generates, uses and can radiate radio frequency energy and, 
if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:
— Reorient or relocate the receiving antenna.
— Increase the distance between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
EEC statement
This machine was tested against the 89/336/EEC (European Economic Community) 
for EMC (Electric Magnetic Compatibility) and fulfills these requirements.
MIC statement
B class equipment (Household purpose info/telecommunications equipment)
As this equipment has undergone EMC registration for household purpose, this product can 
be used in any area including residential area.
Downloaded From projector-manual.com BenQ Manuals