BenQ Mx660/mx615/ms614 Digital Projector User Manual

Operation 41 4. The Advanced Settings page allows you to configure Q Presenter.
• To display still pictures, click the down arrow to reveal a drop-down list and 
select Graphic. Click Apply. To display video clips, click the down arrow to reveal 
a drop-down list and select Video. Click Apply. 
Graphic mode: worse image quality but faster transmission speed.
Video mode: better image quality but slower transmission speed. 
However, the actual transmission speed was determined by the network traffic at...

Operation 42
Presenting from a USB Reader
This feature displays a slide show of images stored on a USB flash drive connected to the 
projector. It can eliminate the need for a computer source.
Supported image formats:
•  A square box will display on the filename for unidentified characters.
•  Thai filename is not supported.
•  Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than 
WXGA (1280 x 800) only.
•  If a folder consists of more than 200 photos, only the first...

Operation 43
Shutting down the projector
1. Press  POWER and a confirmation message will display prompting you. 
If you dont respond in a few seconds, the message will disappear.
2. Press  POWER a second time. The POWER indicator light flashes orange, the 
projection lamp shuts down, and the fans will continue to run for approximately 90 
seconds to cool down the projector.
To protect the lamp, the projector will not respond to any commands during the cooling 
process.
To shorten the cooling time, you...

Operation 44
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected and the projector model you are using.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Keystone
Position
Phase
H. Size
Digital Zoom
3D Sync On/Off
3D Sync Invert Disable/Invert
Teaching 
TemplateBlackboardOff/Letter Formation/Worksheet/
Coordinate Chart
WhiteboardOff/Letter...

Operation 45
Main menu Sub-menu Options
4. 
SYSTEM 
SETUP: 
Basic
Language
Projector PositionFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Menu SettingsMenu Display 
Time5 sec/10 sec/15 sec/20 sec/25 
sec/30 sec
Menu PositionCenter/Top-Left/Top-Right/
Bottom-Right/Bottom-Left
Reminder 
MessageOn/Off
Operation 
SettingsDirect Power On On/Off
Auto Power OffDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Blank TimerDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Sleep TimerDisable/30 min/1 hr/2...

Operation 46Note that the menu items are available when the projector detects at least one valid signal. If 
there is no equipment connected to the projector or no signal detected, limited menu items 
are accessible.
Main menu Sub-menu Options
5. 
SYSTEM 
SETUP: 
Advanced
Closed CaptionClosed Caption 
EnableOn/Off
Caption VersionCC1/CC2/CC3/CC4
Standby 
SettingsNetwork On/Off
Monitor Out On/Off
Wireless LANStatus
SSID
IP Address
Connection Mode
Reset All Settings
6. 
INFORMATION
FAQ-Image and...

Operation 47
Description of each menu
Function Description
Wall ColorCorrects the projected picture’s color when the projection surface is not 
white. See Using Wall Color on page 27 for details.
Aspect RatioThere are several options to set the images aspect ratio depending on 
your input signal source. See Selecting the aspect ratio on page 25 for 
details.
KeystoneCorrects any keystoning of the image. See Switching input signal on 
page 24 for details.
Position
Displays the position adjustment page. To...

Operation 48
Function Description
Teaching 
Template
Provides several preset patterns for various teaching purposes.
Choose Blackboard or Whiteboard first by pressing  /  and press 
/  to choose the pattern you need. Press MODE/ENTER to activate 
the pattern.
Picture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See Selecting a 
picture mode on page 27 for details.
Reference 
ModeSelects a picture mode that best suits your need for...

Operation 49
Function Description
Quick Auto 
SearchSee Switching input signal on page 24 for details.
Color Space 
ConversionSee Changing Color Space on page 24 for details.
Presentation 
TimerReminds the presenter to finish the presentation within a certain time 
frame. See Setting the presentation timer on page 30 for details.
LanguageSets the language for the On-Screen Display (OSD) menus. See Using 
the menus on page 20 for details.
Projector 
PositionThe projector can be installed on a ceiling or...

Operation 50
Function Description
Panel Key 
LockDisables or enables all panel key functions except   POWER on the 
projector and keys on the remote control. See Locking control keys on 
page 32 for details.
Background 
ColorSets the background color for the projector.
Splash 
ScreenAllows you to select which logo screen will display during projector 
start-up. The following options are available: BenQ logo, My Screen, 
Black screen, Blue screen.
My Screen
Captures and stores the projected picture as My...