BenQ Mx660/mx615/ms614 Digital Projector User Manual

Operation 31
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging 
function. See Connection on page 15 for details.
You can operate your display software program (on a connected PC) which responds to page 
up/down commands (like Microsoft PowerPoint) by pressing PAGE UP/PAGE DOWN on 
the remote control.
If remote paging function doesnt work, check if the USB connection is correctly made and 
the mouse driver on your computer is updated to the...

Operation 32
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from 
being changed accidentally (by children, for example). When the Panel Key Lock is on, no 
control keys on the projector will operate except  POWER.
1. Press  /  on the projector or remote control or go to the SYSTEM SETUP: Basic > 
Panel Key Lock menu, and select On by pressing  /  on the projector or remote 
control. A confirmation message displays. 
2. Highlight Ye s and press...

Operation 33 1. Press CAPTURE on the remote control. 
2. A confirmation message displays. Press CAPTURE or MODE/ENTER again.
3. The message Screen Capturing... displays while the projector is processing the 
picture. Please wait.
4. If the action is successful, you see the message Captured Succeeded on the screen. The 
captured picture is saved as MyScreen.
5. To view the captured picture displayed as the startup screen, set MyScreen in the 
SYSTEM SETUP: Basic > Splash Screen menu and restart the...

Operation 34
Controlling the projector through a LAN 
environment
You can manage and control the projector from a remote computer when they are properly 
connected to the same local area network.
Wireless connection
To connect to the projector wirelessly, you have to plug a BenQ wireless dongle (optional) to 
the USB Type A connector on the projector, and then only a few OSD configuration steps are 
required.
1. Make sure the projector is turned on.
2. Press MENU/EXIT and then press  /  until the SYSTEM...

Operation 35 2. The main page of the Projector Network Display System appears. This web page 
provides access to a variety of functions with a simple click.
3. Click Download to save Q Presenter software on your computer. See Displaying 
images through Q Presenter on page 39 for details.
4. The Virtual Keypad page displays a virtual keypad with which you can control the 
projector as if using the physical keypad on the projector. See Projector on page 10 
for how to operate it. 

Operation 365. The Display Setting page provides some selective OSD menu items necessary for 
controlling the projector or adjusting the projected pictures. See the chapter Menu 
operation for how to use them.
6. The Picture Setting page provides all the OSD menu items in the PICTURE menu for 
adjusting the projected pictures. See 2. PICTURE menu on page 48 for how to use 
them. 

Operation 37 7. The Information page displays the information about the projector status, network 
status.
8. To have access to the Admin page, you need to enter a password. The page provides 
more network settings. The default password is “0000”. If you want to change the 
password, enter the Basic page. 

Operation 38The Basic page allows you to change the password and set the maximum number of 
connected computers. The number of connected computer may affect the network 
display performance.
The Wireless LAN page allows you to adjust the Wireless LAN settings.
The maximum length for SSID is 16 bytes. Please use different SSID when more 
than two projectors are connecting through wireless LAN.
9. These quick buttons are always provided on the web page for you to operate the 
projector. 

Operation 39
Displaying images through Q Presenter
Downloading and installing Q Presenter
Q Presenter is an application running on the host PC. It helps connect your computer to an 
available network projector and transfer the desktop contents to the network projector via 
local network connection.
1. Enter the main page of the Projector Network Display System. See steps 1-2 on page 34 
for details.
2. Click the Download icon.
3. When the download is complete, install the software to your computer by...

Operation 402. The Special Feature page provides some advanced functions to manage the projected 
images.
• To display a full screen, click Full Screen.
• To display a partial screen, click Selectable. A square appears on your screen. You 
can adjust its size and place it where you want to project.
• To pause projection, click Pause.
3. The Basic Settings page allows you to configure Q Presenter.
• To change the Q Presenter interface language, click the down arrow to reveal a 
drop-down list and select a...