BenQ Mp612c Dlp Users Manual

Operation 41
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
DISPLAY
Wall ColorOff/Light yellow/Pink/Light 
Green/Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9
Keystone
Position
Phase
H. Size
Digital Zoom
PICTURE
Picture ModePC source: Dynamic/
Presentation/sRGB/Cinema/User 
1/User 2
Video source: Dynamic/
Standard/Cinema/User 1/User 2
Reference ModePC source: Dynamic/
Presentation/sRGB/Cinema
Video...

Operation 42
SYSTEM 
SETUP: 
Basic
Presentation 
TimerTimer period 1~240 minutes
Timer display Always/1 min/2 min/3 min/Never
Timer positionBottom-right/Top-right/Bottom-
left/Top-left
Timer counting 
directionCount down/Count up
Timer audible 
reminderOn/Off
On/Off
Language
Projector PositionFront table/Rear table/Rear 
ceiling/Front ceiling
Auto Power OffDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Blank TimerDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Panel Key Lock On/Off
Timer...

Operation 43 Note that the menu items are available when the projector detects at least one valid signal. If 
there is no equipment connected to the projector or no signal detected, limited menu items 
are accessible.
Information
FAQ-Image and Installation
FAQ-Features and Service
Current System Status
• Source
• Picture Mode
• Resolution
• Color System
• Equivalent Lamp Hour
Downloaded From projector-manual.com BenQ Manuals 

Operation 44
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various 
adjustments and settings.
There are 17 different OSD menu languages. See System setup: Basic menu on page 47 for 
details.
Below is the overview of the OSD menu.
The following example describes the adjustment of Keystone.
1. Press Menu/exit on the projector or 
remote control to turn the OSD menu on.4. Press Mode/enter to display the 
keystone correction page.
2. Use Left/Right to select the...

Operation 45
Display menu
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Wall Color
 (Off)Correct the projected picture’s color when the projection surface is not 
white.
Aspect Ratio
(Auto)There are four options to set the images aspect ratio depending on your 
input signal source.
See Selecting a picture mode on page 33 for details.
Keystone
(0)Corrects any keystoning of the image. See Correcting keystone on page 
31 for details.
Position
(0)Displays the position adjustment page....

Operation 46
Picture menu
Some picture adjustments are available only when certain input sources are in use. 
Unavailable adjustments are not shown on the screen.
FUNCTION
 (default setting / 
value)DESCRIPTION
Picture Mode
(PC: Dynamic;
YPbPr/ S-Video/ 
Video: 
Standard)Pre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See Selecting a picture 
mode on page 33 for details.
Reference 
ModeSelects an picture mode that most suits your need for...

Operation 47
Source menu
System setup: Basic menu
FUNCTION
(default setting / 
value)DESCRIPTION
Quick Auto 
Search
(On)See Switching input signal on page 29 for details.
FUNCTION
(default setting / 
value)DESCRIPTION
Presentation 
Timer
(Off)Reminds the presenter to finish the presentation within a certain time
frame. See Setting the presentation timer on page 36 for details.
Timer period (15 min.)
Sets a preferred length of time for presentation.
Timer display (Always)
Sets whether to display the timer...

Operation 48
System setup: Advanced menu
Auto Power 
Off
(Disable)This function allows the projector to turn off automatically if no input 
signal is detected after a set period of time. Press Left/ Right on the 
projector or remote control to set the duration before the projector is 
turned off. 
The time period can be set from 5 to 30 minutes in 5-minute increments. 
If the preset time lengths are not suitable for your presentation, select 
Disable. The projector will not automatically shut down in a...

Operation 49
Menu 
Settings
Menu display time (15 sec)
Sets the length of time the OSD will remain active after your last button 
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position (Center)
Sets the On-Screen Display (OSD) menu position.
Lamp 
Settings
Lamp mode (Normal)
Toggles the projector lamp between Normal and Economic modes. Using 
Economic mode reduces system noise and power consumption by 20%. If 
the Economic mode is selected, the light output will be reduced and...

Operation 50
Information menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. 
Unavailable adjustments are not shown on the screen.
FUNCTIONDESCRIPTION
FAQ-Image and 
Installation
Displays possible solutions to problems you may encounter.FAQ-Features 
and Service
Current System 
Status
Source
Shows the current signal source.
Picture mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the...