BenQ Mp612c Dlp Users Manual
Have a look at the manual BenQ Mp612c Dlp Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operation 41 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options DISPLAY Wall ColorOff/Light yellow/Pink/Light Green/Blue/Blackboard Aspect Ratio Auto/Real/4:3/16:9 Keystone Position Phase H. Size Digital Zoom PICTURE Picture ModePC source: Dynamic/ Presentation/sRGB/Cinema/User 1/User 2 Video source: Dynamic/ Standard/Cinema/User 1/User 2 Reference ModePC source: Dynamic/ Presentation/sRGB/Cinema Video source: Dynamic/ Standard/Cinema Brightness Contrast Color Tint Sharpness Brilliant Color B1/B2 Color TemperatureT1/T2/T3/T4 3D Color ManagementPrimary color R/G/B/C/M/Y Hue Saturation Gain Save Settings SOURCEQuick Auto Search On/Off Downloaded From projector-manual.com BenQ Manuals
Operation 42 SYSTEM SETUP: Basic Presentation TimerTimer period 1~240 minutes Timer display Always/1 min/2 min/3 min/Never Timer positionBottom-right/Top-right/Bottom- left/Top-left Timer counting directionCount down/Count up Timer audible reminderOn/Off On/Off Language Projector PositionFront table/Rear table/Rear ceiling/Front ceiling Auto Power OffDisable/5 min/10 min/15 min/20 min/25 min/30 min Blank TimerDisable/5 min/10 min/15 min/20 min/25 min/30 min Panel Key Lock On/Off Timer ControllerDisable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/12 hr Splash Screen Black/Blue/BenQ SYSTEM SETUP: Advanced Quick Cooling Off/On High Altitude Mode Off/On Audio SettingsMute Off/On Vo lu m e Power on/off ring toneOff/On Menu SettingsMenu display time5 sec/10 sec/15 sec/20 sec/25 sec/30 sec Menu positionCenter/Top-left/Top-right/Bottom- right/Bottom-left Lamp SettingsLamp mode Normal/Economic Reset lamp timer Equivalent lamp hour Security SettingsChange password Power on lock On/Off Reset All Settings Downloaded From projector-manual.com BenQ Manuals
Operation 43 Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. Information FAQ-Image and Installation FAQ-Features and Service Current System Status • Source • Picture Mode • Resolution • Color System • Equivalent Lamp Hour Downloaded From projector-manual.com BenQ Manuals
Operation 44 Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. There are 17 different OSD menu languages. See System setup: Basic menu on page 47 for details. Below is the overview of the OSD menu. The following example describes the adjustment of Keystone. 1. Press Menu/exit on the projector or remote control to turn the OSD menu on.4. Press Mode/enter to display the keystone correction page. 2. Use Left/Right to select the DISPLAY menu. 3. Press Up/Down to select Keystone.5. Based on the image shape displayed on the screen, press the keystone buttons ( /Up, /Down) to adjust the image to a rectangular or square one. 6. Press Menu/exit on the projector or remote control to leave and save the settings. Current input signal Main menu icon Main menu Sub-menu Highlight Press Menu/ exit to the previous page or to exit.Status DISPLAYWall Color Aspect Ratio Keystone Position Phase H. Size Digital ZoomDisable Auto 50 50 ENTER MENU Exit S-VIDEO DISPLAYWall Color Aspect Ratio Position Phase H. Size Digital ZoomDisable Auto MENUExit Keystone 50 50 S-VIDEO KEYSTONE BackMENU DISPLAYWall Color Aspect Ratio Keystone Position Phase H. Size Digital ZoomDisable Auto ENTER MENU Exit S-VIDEO Downloaded From projector-manual.com BenQ Manuals
Operation 45 Display menu FUNCTION (default setting/ value)DESCRIPTION (default setting/value) Wall Color (Off)Correct the projected picture’s color when the projection surface is not white. Aspect Ratio (Auto)There are four options to set the images aspect ratio depending on your input signal source. See Selecting a picture mode on page 33 for details. Keystone (0)Corrects any keystoning of the image. See Correcting keystone on page 31 for details. Position (0)Displays the position adjustment page. To move the projected image, use the directional arrow buttons. The values shown on the lower position of the page change with every button press you made until they reach their maximum or minimum. Phase (depends on the selected input source)Adjusts the clock phase to reduce image distortion. H. Size (depends on the selected input source)Adjusts the horizontal width of the image. Digital Zoom (100%)Magnifies or reduces the projected image. After the image is magnified, you can press Mode/enter to activate the Pan functionality for searching the details of the projected image by using the directional arrow buttons on the projector or remote control. See Magnifying and searching for details on the projected picture on page 31 for details. Downloaded From projector-manual.com BenQ Manuals
Operation 46 Picture menu Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen. FUNCTION (default setting / value)DESCRIPTION Picture Mode (PC: Dynamic; YPbPr/ S-Video/ Video: Standard)Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See Selecting a picture mode on page 33 for details. Reference ModeSelects an picture mode that most suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. BrightnessAdjusts the brightness of the image. See 1. Adjusting brightness on page 34 for details. ContrastAdjusts the degree of difference between dark and light in the image. See 2. Adjusting contrast on page 34 for details. Color (0)Adjusts the color saturation level -- the amount of each color in a video image. Lower setting produces less saturated colors; setting to the minimum value makes the image black and white. If the setting is too high, colors on the image will be overpowering, which makes the image unrealistic. Tint (0)Adjusts the red and green color tones of the image. The higher the value, the more greenish the image becomes. The lower the value, the more reddish the image becomes. Sharpness (15)Adjusts the image to make it look sharper or softer. Brilliant Color (B2)Adjusts white peaking while maintaining correct color presentation.When Brillian Color is set as B1, the color temperature adjustment will not function. Color TemperatureThere are four color temperature settings are available. See 3. Selecting a color temperature on page 34 for details. 3D Color ManagementSee 4. 3D Color Management on page 35 for details. Save SettingsSaves the settings made for User 1 or 2 mode. Downloaded From projector-manual.com BenQ Manuals
Operation 47 Source menu System setup: Basic menu FUNCTION (default setting / value)DESCRIPTION Quick Auto Search (On)See Switching input signal on page 29 for details. FUNCTION (default setting / value)DESCRIPTION Presentation Timer (Off)Reminds the presenter to finish the presentation within a certain time frame. See Setting the presentation timer on page 36 for details. Timer period (15 min.) Sets a preferred length of time for presentation. Timer display (Always) Sets whether to display the timer on screen. Timer position (Top-Left) Sets the position where the timer displays on screen. Timer counting direction (Count down) Sets the timer counting direction. Timer audible reminder (Off) Sets whether to activate sound reminder when the time is up. Language Sets the language for the On-Screen Display (OSD) menus. Use Left/Right on the projector or remote control to select your desired language. There are 17 languages for your choice: English (default), French, German, Italian, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese, Korean, Swedish, Dutch, Turkish, Czech, Portuguese, Thai, and Polish. Projector Position (Front Table)The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. Contact your dealer for the ceiling mount bracket (optional accessory) if you need to install the projector on your ceiling. See Choosing a location on page 16 for details. Downloaded From projector-manual.com BenQ Manuals
Operation 48 System setup: Advanced menu Auto Power Off (Disable)This function allows the projector to turn off automatically if no input signal is detected after a set period of time. Press Left/ Right on the projector or remote control to set the duration before the projector is turned off. The time period can be set from 5 to 30 minutes in 5-minute increments. If the preset time lengths are not suitable for your presentation, select Disable. The projector will not automatically shut down in a certain time period. Blank Timer (Disable)Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See Hiding the image on page 38 for details. Timer Controller (Disable)Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours. Panel Key Lock (Disable)Disables or enables all panel key functions except POWER on the projector and buttons on the remote control. See Locking control keys on page 38 for details. Splash Screen (BenQ logo)Allows you to select which logo screen will display during projector start- up. Three options are available: BenQ logo, Black screen, or Blue screen. FUNCTION (default setting / value)DESCRIPTION Quick Cooling (On)Enables or disables the Quick Cooling function. Selecting On enables the function and projector cooling time will be shortened from a normal 90- second duration to approximately 30 seconds. High Altitude Mode (Off)A mode for operation in high altitude areas. See Hiding the image on page 38 for details. Audio Settings Mute (Off) Toggles the projector audio between on and off. Vo l u m e (5) Adjusts audio volume level. Power on/off ring tone (On) Toggles the ring tones during startup and after the cooling process finishes between on and off. Downloaded From projector-manual.com BenQ Manuals
Operation 49 Menu Settings Menu display time (15 sec) Sets the length of time the OSD will remain active after your last button press. The range is from 5 to 30 seconds in 5-second increments. Menu position (Center) Sets the On-Screen Display (OSD) menu position. Lamp Settings Lamp mode (Normal) Toggles the projector lamp between Normal and Economic modes. Using Economic mode reduces system noise and power consumption by 20%. If the Economic mode is selected, the light output will be reduced and result in darker projected images. Setting the projector in Economic mode also extends the lamp timer automatic shutdown feature. See Calculation of lamp hour on page 52 for details on how the total lamp hour is calculated. Reset lamp timer Once the lamp is renewed, select Reset to return the lamp timer to 0. Equivalent lamp hour Displays the number of hours the lamp has been used. Security Settings Change password You will be asked to enter the current password before changing to a new one. See Utilizing the power-on lock function on page 27 for details. Power on lock (Off) Limits use of the projector to only those who know the correct password. When the function is activated for the first time, you have to set a password for it. See Utilizing the power-on lock function on page 27 for details. Once the password is set and this function is selected, the projector is password-protected. Users who do not know the correct password can not use the projector. The password can be entered by using either the buttons on the projector or the remote control. You will be inconvenienced if you activate the power-on lock functionality and subsequently forget the password. Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall. The password will display as asterisks on-screen when being input. Reset All Settings Returns all settings to the factory preset values. The following settings will still remain: Projector Position, Language, Security Settings, High Altitude Mode, Phase, User I, User II, Position, H. Size. Downloaded From projector-manual.com BenQ Manuals
Operation 50 Information menu This menu shows you the current operating status of the projector. Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen. FUNCTIONDESCRIPTION FAQ-Image and Installation Displays possible solutions to problems you may encounter.FAQ-Features and Service Current System Status Source Shows the current signal source. Picture mode Shows the selected mode in the PICTURE menu. Resolution Shows the native resolution of the input signal. Color system Shows input system format, NTSC, PAL, SECAM, or RGB. Equivalent lamp hour Displays the number of hours the lamp has been used. Downloaded From projector-manual.com BenQ Manuals