BenQ Mp611c Dlp Users Manual

							We l c o m e
MP611/MP611c Digital Projector
Mainstream Series
User Manual
Downloaded From projector-manual.com BenQ Manuals 
						

							Copyright
Copyright 2006 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or 
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, 
manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with respect 
to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any 
particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to 
make changes from time to time in the contents hereof without obligation to notify any person of 
such revision or changes.
*DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others are 
copyrights of their respective companies or organizations.
Downloaded From projector-manual.com BenQ Manuals 
						

							Table of contents iii
Table of contents
Important safety instructions ....................................  1
Introduction ...............................................................  5
Projector features ................................................................. 5
Shipping contents ................................................................. 6
Projector exterior view ......................................................... 7
Controls and functions ........................................................ 8
Positioning your projector ......................................  12
Choosing a location  ........................................................... 12
Safety instructions for ceiling mounting of the projector  13
Obtaining a preferred projected image size ...................... 14
Connection ...............................................................  17
Connecting a computer or monitor  ................................. 17
Connecting Video source devices ...................................... 19
Operation .................................................................  23
Start up  ............................................................................... 23
Utilizing the password function ........................................ 24
Switching input signal ........................................................ 26
Adjusting the projected image  .......................................... 26
Selecting the aspect ratio  ................................................... 28
Selecting a picture mode .................................................... 29
Hiding the image ................................................................ 30
Creating your own startup screen-MyScreen function  ... 30
Activating panel key lock  .................................................. 32
Setting the presentation timer ........................................... 33
Freezing the image  ............................................................. 33
Utilizing FAQ function ...................................................... 34
Shutting down the projector  ............................................. 34
Menu operation .................................................................. 35
Maintenance .............................................................  44
Care of the projector  ......................................................... 44
Lamp information .............................................................. 45
Downloaded From projector-manual.com BenQ Manuals 
						

							Table of contents iv
Troubleshooting .......................................................  51
Specifications ............................................................  52
Projector specifications  ...................................................... 52
Timing chart ........................................................................ 53
Dimensions.......................................................................... 54
Warranty ...................................................................  55
Limited warranty ................................................................ 55
Regulation statements ..............................................  56
FCC statement  .................................................................... 56
EEC statement  .................................................................... 56
MIC statement .................................................................... 56
WEEE directive ................................................................... 56
Downloaded From projector-manual.com BenQ Manuals 
						

							Important safety instructions 1
Important safety instructions
Your BenQ projector is designed and tested to meet the latest standards for safety of 
information technology equipment. However, to ensure safe use of this product, it is 
important that you follow the instructions mentioned in this manual and marked on the 
product. 
Safety Instructions
1.Please read this manual before you 
operate your projector. Save it for 
future reference.   
2.Do not look straight at the projector 
lens during operation. The intense 
light beam may damage your eyes. 
3.Refer servicing to qualified service 
personnel. 4.Always open the lens shutter or 
remove the lens cap when the 
projector lamp is on. 
5. In some countries, the line voltage is 
NOT stable. This projector is designed 
to operate safely within a mains 
voltage between 100 to 240 volts AC, 
but could fail if power cuts or surges 
of ±10 volts occur. In areas where the 
mains voltage may fluctuate or cut 
out, it is recommended that you 
connect your projector through a 
power stabilizer, surge protector or 
uninterruptible power supply (UPS). 
6. Do not block the projection lens with 
any objects when the projector is 
under operation as this could cause 
the objects to become heated and 
deformed or even cause a fire. To 
temporarily turn off the lamp, press 
BLANK on the projector or remote 
control.
Downloaded From projector-manual.com BenQ Manuals 
						

							Important safety instructions 2  
Safety Instructions (Continued)
7. The lamp becomes extremely hot 
during operation. Allow the 
projector to cool for approximately 
45 minutes prior to removing the 
lamp assembly for replacement. 
8. Do not operate lamps beyond the 
rated lamp life. Excessive operation 
of lamps beyond the rated life could 
cause them to break on rare 
occasions. 
9. Never replace the lamp assembly or 
any electronic components unless 
the projector is unplugged. 10. Do not place this product on an 
unstable cart, stand, or table. The 
product may fall, sustaining serious 
damage. 
11. Do not attempt to disassemble this 
projector. There are dangerous high 
voltages inside which may cause 
death if you should come into 
contact with live parts. The only 
user serviceable part is the lamp 
which has its own removable cover.
Under no circumstances should you 
ever undo or remove any other 
covers. Refer servicing only to 
suitably qualified professional 
service personnel.
Downloaded From projector-manual.com BenQ Manuals 
						

							Important safety instructions 3        
Safety Instructions (Continued)
12. Do not place this projector in any of the 
following environments. 
- Space that is poorly ventilated or confined. 
Allow at least 50 cm clearance from walls 
and free flow of air around the projector. 
- Locations where temperatures may 
become excessively high, such as the 
inside of a car with all windows rolled up.
- Locations where excessive humidity, dust, 
or cigarette smoke may contaminate 
optical components, shortening the 
projectors life span and darkening the 
image.
- Locations near fire alarms
- Locations with an ambient temperature 
above 40°C / 104°F
- Locations where the altitudes are higher 
than 10000 feet.
13. Do not block the ventilation holes. 
- Do not place this projector on a blanket, 
bedding or any other soft surface. 
- Do not cover this projector with a cloth or 
any other item. 
- Do not place inflammables near the 
projector.   
If the ventilation holes are seriously 
obstructed, overheating inside the 
projector may result in a fire.
14. Always place the projector on a level, 
horizontal surface during operation.
- Do not use if tilted at an angle of more 
than 10 degrees left to right, nor at angle 
of more than 15 degrees front to back. 
Using the projector when it is not fully 
horizontal may cause a malfunction of, or 
damage to, the lamp. 
15. Do not stand the projector on end 
vertically. Doing so may cause the 
projector to fall over, causing injury or 
resulting in damage to the projector.
10000 
feet
Downloaded From projector-manual.com BenQ Manuals 
						

							Important safety instructions 4
Safety Instructions (Continued)
16. Do not step on the projector or place 
any objects upon it. Besides probable 
physical damage to the projector, doing 
so may result in accidents and possible 
injury.
17. Do not place liquids near or on the 
projector. Liquids spilled into the 
projector may cause it to fail. If the 
projector does become wet, disconnect 
it from the power supplys wall socket 
and call BenQ to have the projector 
serviced.18. This product is capable of displaying 
inverted images for ceiling mount 
installation. 
Use only BenQs Ceiling Mount Kit for 
mounting the projector and ensure it is 
securely installed. 
19. When the projector is under operation, 
you may sense some heated air and 
odor from its ventilation grill. It is a 
normal phenomenon and not a 
product defect.
Downloaded From projector-manual.com BenQ Manuals 
						

							Introduction 5
Introduction
Projector features
The projector integrates high-performance optical engine projection and a user-friendly 
design to deliver high reliability and ease of use.
The projector offers the following features.
• Selectable password protected function
• Compact and portable unit
• High quality manual zoom lens
• One-key auto-adjustment to display the best picture quality
• Digital keystone correction to correct distorted images 
• Adjustable color balance control for data/video display
• Ultra-high brightness projection lamp
• Ability to display 16.7 million colors
• Multi-language On-Screen Display (OSD) menus
• Switchable normal and Economic modes to reduce the power consumption
• Built-in speaker provides mixed mono audio when an audio input is connected
• Powerful AV function to provide high quality video image
• Component HDTV compatibility (YP
bPr)
• The apparent brightness of the projected image will vary depending on the ambient 
lighting conditions, selected input source contrast/brightness settings, and is directly 
proportional to projection distance.
• The lamp brightness will decline over time and may vary within the lamp manufacturers 
specifications. This is normal and expected behavior.
Downloaded From projector-manual.com BenQ Manuals 
						

							Introduction 6
Shipping contents
The projector is shipped with the cables required for connection to a PC or video 
equipment. Carefully unpack and verify that you have all of the items shown below. If any of 
these items are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those 
illustrated.
Optional accessories
Projector Soft carry case Quick start 
guideUser manual 
CD
Pull the tab before using the 
remote control
User manual Remote control with batteries
VG A  c a b l e Pow e r  co rd
1. Spare lamp kit
2. Ceiling mount kit
3. Presentation Plus4. Component Video to VGA (D-sub) 
adaptor cable
5. RS232 cable
Downloaded From projector-manual.com BenQ Manuals