BenQ Lw61st Users Manual

Operation 31 6. Press  to select a menu item to be changed and adjust the value with /. See 
Fine-tuning the image quality in user modes below for details.
7. When all settings have been done, highlight Save Settings and press MODE/
ENTER to store the settings.
8. The confirmation message “Setting Saved” is displayed.
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available 
when User 1 or User 2 is selected. Based on your needs,...

Operation 32There are many different shades that are considered to be white for various purposes. 
One of the common methods of representing white color is known as the “color 
temperature”. A white color with a low color temperature appears to be reddish white. A 
white color with a high color temperature appears to have more blue in it.
3D Color Management
In most installation situations, color management will not be necessary, such as in 
classroom, meeting room, or lounge room situations where lights...

Operation 33
Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a 
setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be 
overpowering and unrealistic.
6. Press  to highlight Gain and adjust its values to your preference by pressing  /
. The contrast level of the primary color you select will be affected. Every 
adjustment made will reflect to the image immediately. 
7. Repeat steps 3 to 6 for...

Operation 34
To cancel the timer, perform the following steps:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight 
Off. Press MODE/ENTER. A confirmation message is displayed.
2. Highlight Ye s and press MODE/ENTER to confirm. You will see the message 
“Timer is Off” appearing on the screen. 
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging 
function. See Connection on page 17 for details.
You can operate your display...

Operation 35
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings 
from being changed accidentally (by children, for example). When the Panel Key Lock is 
on, no control keys on the projector will operate except  POWER.
1. Go to the SYSTEM SETUP: Basic > Panel Key Lock menu, and select On by 
pressing  /  on the projector or remote control. A confirmation message is 
displayed. 
2. Highlight Ye s and press MODE/ENTER to confirm.
To release panel key...

Operation 364. If the action is successful, you see the message Captured Succeeded on the 
screen. The captured picture is saved as MyScreen.
5. To view the captured picture displayed as the startup screen, set MyScreen in the 
SYSTEM SETUP: Basic > Splash Screen menu and restart the projector.
•  Using the OSD menu
1. Press MENU/EXIT and then press  /  until the SYSTEM SETUP: Basic menu 
is highlighted.
2. Press  to highlight MyScreen and press MODE/ENTER.
3. Repeat steps 2-5 in the Using the remote...

Operation 37
Presenting from a USB Reader
This feature displays a slide show of images stored on a USB flash drive connected to the 
projector. It can eliminate the need for a computer source.
Supported image formats:
•  Not all PDF files can be displayed.
•  A square box will be displayed on the filename for unidentified characters.
•  Thai filename is not supported.
•  Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than WXGA (1280 x 
800) only.
•  If a folder...

Operation 38
During a slide show
Setting page
You can adjust the file order and Slideshow settings. When you are done, press OK to save 
the settings or press Cancel to ignore the change.
Shutting down the projector
1. Press  POWER or   OFF, and a confirmation message will be displayed 
prompting you. 
If you dont respond in a few seconds, the message will disappear.
2. Press  POWER or   OFF a second time. The POWER indicator light 
flashes orange, the light source shuts down.
3. A Power Off Ring Tone...

Operation 39
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected and the projector model you are using.
Main menu Sub-menu Options
1. 
DISPLAY
Wall ColorOff/Light Yellow/Pink/Light Green/
Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16:10
Auto Keystone On/Off
Keystone
Position
Phase
H. Size
Digital Zoom
3D Sync Off/Frame Sequential/Top-Bottom
3D Sync Invert Disable/Invert
Teaching 
TemplateBlackboardOff/Letter Formation/Worksheet/...

Operation 40
Main menu Sub-menu Options
4. 
SYSTEM 
SETUP: 
Basic
Language
Projector PositionFront Table/Rear Table/Rear 
Ceiling/Front Ceiling
Menu SettingsMenu Display 
Time5 sec/10 sec/15 sec/20 sec/25 sec/30 
sec
Menu PositionCenter/Top-Left/Top-Right/Bottom-
Right/Bottom-Left
Reminder 
MessageOn/Off
Operation 
SettingsDirect Power On On/Off
Signal Power On On/Off
Auto Power OffDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Eco Blank TimerDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Sleep...