Home > BenQ > Projector > BenQ Gp2 Users Manual

BenQ Gp2 Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual BenQ Gp2 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 702 BenQ manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Operation61
    Description of each menu
    FUNCTIONDESCRIPTION
    Language
    Sets the language for the On-Screen Display (OSD) menus.
    LED Mode
    Choose Eco to dim the projector LED which will lower power 
    consumption, extend the LED life and reduce noise. Choose 
    Normal to return normal mode.
    Wall ColorCorrects the projected picture’s color when the projection surface is 
    not white.
    Auto 
    Key s t o n eAuto corrects any keystoning of the image.
    Auto Power 
    OffAllows the projector to turn off automatically if no input signal is 
    detected after a set period of time.
    Splash ScreenAllows you to select which logo screen will display during projector 
    start-up. Three options are available: BenQ logo, Black screen, or 
    Blue screen.
    High Altitude 
    ModeA mode for operation in high altitude areas. See Operating in a high 
    altitude environment on page 37for details.
    Audio 
    SettingsSee Adjusting the sound on page 37 for details.
    Menu Display 
    TimeSets the length of time the OSD will remain active after your last key 
    press. The range is from 5 to 30 seconds in 5-second increments.
    Security 
    SettingsSee Securing the projector on page 32 for details.
    Test PatternSelecting OK enables the function and the projector displays the grid 
    test pattern. It helps you adjust the image size and focus and check 
    that the projected image is free from distortion.
    Reset All 
    SettingsReturns all settings to the factory preset values.
    Firmware 
    UpgradeUpdating the latest firmware are only allowed via an SD card. 
    1. GENERAL menu
    Downloaded From projector-manual.com BenQ Manuals 
    						
    							Operation 62
    FUNCTIONDESCRIPTION
    Source
    Shows the current signal source.
    Picture ModeShows the selected mode.
    Color SystemShows input system format: RGB or YUV.
    ResolutionShows the native resolution of the input signal.
    Internal 
    MemoryShows the memory capacity status: Internal Memory.
    SD Card Shows the memory capacity status: SD Card.
    USB DriveShows the memory capacity status: USB Drive.
    Firmware 
    VersionShows firmware version.
    2. INFORMATION menu
    Downloaded From projector-manual.com BenQ Manuals 
    						
    							Operation63
    Shutting down the projector
    1. Press Power and a confirmation message 
    displays prompting you. 
    If you dont respond in a few seconds, the 
    message will disappear.
    2. Press Power a second time. 
    3. The Power LED indicator flashes blue slowly 
    and fans stop.
    4. Disconnect the power cord from the wall socket if the projector will not be used in 
    an extended period of time.II
    II
    Downloaded From projector-manual.com BenQ Manuals 
    						
    							Maintenance 64
    Maintenance
    Care of the projector
    Your projector needs little maintenance. The only thing you need to do on a regular basis 
    is to keep the lens clean.
    Never remove any parts of the projector. Contact your dealer if other parts need 
    replacing.
    Cleaning the lens
    Clean the lens whenever you notice dirt or dust on the surface. 
    • Use a canister of compressed air to remove dust. 
    • If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens 
    cleaner and gently wipe the lens surface.
    Never rub the lens with abrasive materials.
    Cleaning the projector case
    Before you clean the case, turn the projector off using the proper shutdown procedure as 
    described in Shutting down the projector on page 63 and unplug the power cord.
    • To remove dirt or dust, wipe the case with a soft, lint-free cloth.
    • To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral pH 
    detergent. Then wipe the case.
    Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the 
    case.
    Storing the projector
    If you need to store the projector for an extended time, please follow the instructions 
    below:
    • Make sure the temperature and humidity of the storage area are within the 
    recommended range for the projector. Please refer to Specifications on page 67 or 
    consult your dealer about the range.
    • Retract the adjuster feet.
    • Remove the battery from the remote control.
    • Pack the projector in its original packing or equivalent.
    Transporting the projector
    It is recommended that you ship the projector with its original packing or equivalent.
    Downloaded From projector-manual.com BenQ Manuals 
    						
    							Maintenance65
    LED Indicators
    Status / Problems
    LED indicators
    LED BehaviorPow e rOK & 
    RingKey
    Standby Blue Off Off Power LED slow flash
    Power on Blue Blue WhiteLight solid on sequence : 
    Power
    ->Key->Ring & OK 
    Cooling Blue Off Off Power LED slow flash
    Fan1 error Off Blue WhiteRing & OK LED flash first and 
    then key LED flash (1.5 seconds 
    interval)
    Te m p  e r r o r O f f B l u e W h i t eRing & OK LED and Key LED 
    flash at the same time (1.5 
    seconds interval for LED flash)
    Downloaded From projector-manual.com BenQ Manuals 
    						
    							Troubleshooting 66
    Troubleshooting
    The projector does not turn on.
    No picture
    Blurred image
    Remote control does not work
    The password is incorrect
    CauseRemedy
    There is no power from the power cable.Plug the AC adapter into the DC IN socket on the 
    projector, plug the power cord into the AC inlet 
    on the AC adapter, plug the power cord into the 
    power outlet. If the power outlet has a switch, 
    make sure that it is switched on.
    Attempting to turn the projector on again 
    during the cooling process.Wait until the cooling down process has 
    completed.
    CauseRemedy
    The source is not turned on or 
    connected correctly.Turn the source on and check that the signal cable 
    is connected correctly.
    The projector is not correctly connected 
    to the input signal device.Check the connection.
    The input signal has not been correctly 
    selected.Select the correct input signal with the 
    / key 
    on the projector or remote control.
    CauseRemedy
    The projection lens is not correctly 
    focused.Adjust the focus of the lens using the focus ring.
    The projector and the screen are not 
    aligned properly.Adjust the projection angle and direction as well 
    as the height of the unit if necessary.
    CauseRemedy
    The battery is out of power. Replace the battery with new one.
    There is an obstacle between the remote 
    control and the projector.Remove the obstacle.
    You are too far away from the projector. Stand within 7 meters (23 feet) of the projector.
    CauseRemedy
    You do not remember the password.Please see Entering the password recall 
    procedure on page 32 for details.
    Downloaded From projector-manual.com BenQ Manuals 
    						
    							Specifications67
    Specifications
    Projector specifications 
    All specifications are subject to change without notice. 
    General
    Product name Mini Projector
    Model name GP2
    Optical
    Resolution 1280 x 800 WXGA
    Display system 1-CHIP DMD
    Lens F/Number F = 1.928 
    f = 26.95 mm
    Lamp LED
    Throw Ratio 1.13 (44 @ 1m)
    Electrical
    Power supply AC100–240V, 3.20 A,
    50-60 Hz (Automatic)
    Power consumption 48 W (Max.); < 1 W (Standby)
    Keystone Adjustment 1D, Vertical +/- 40 degrees
    Mechanical
    Dimensions 140.3 mm (W) x 52.5 mm (H) x 129.8 mm (D)
    Weight 565g
    Input terminal
    Multi-input
         Computer input D-Sub 15-pin (female) x 1
         Component input Analog - D-Sub  Component RCA jack x 3 (through RGB 
    input)
    HDMI Digital Video x1 (mini type)
         Video input RCA jack x 1
       HDMIHDMI (v1.3) : x1 (mini type)
         Audio input RCA jack x 2
    3.5 mm stereo mini jack x 1
    USB-A type For USB flash drive. Supports videos/photos/music/
    documents.
    mini-B USB type Supports USB display and USB file transfer
    SD card slot Supports videos/photos/music/documents
    iPhone/iPod input  with embedded iPhone/iPod dock
    Internal memory 2GB (1.3 GB for user usage)
    Output terminal
    Audio output 3.5 mm stereo mini jack x 1
    Environmental Requirements
    Operating temperature 0°C-40°C at sea level
    Downloaded From projector-manual.com BenQ Manuals 
    						
    							Specifications 68Operating relative 
    humidity10%-90% (without condensation)
    Operating altitude • 0–1499 m at 0°C–35°C
    • 1500–3000 m at 0°C–30°C (with High Altitude Mode on)
    Downloaded From projector-manual.com BenQ Manuals 
    						
    							Specifications69
    Dimensions
    140.3 mm (W) x 52.5 mm (H) x 129.8 mm (D)
    Timing chart
    Supported timing for PC input
    22.833
    Resolution ModeVe r t i c a l  
    Frequency (Hz)Horizontal 
    Frequency (kHz)
    720 x 400 720 x 400_70 70.087 31.469
    640 x 480VGA_60 59.940 31.469
    VGA_75 75.000 37.500
    VGA_85 85.008 43.269
    800 x 600SVGA_60 60.317 37.879
    SVGA_75 75.000 46.875
    SVGA_85 85.061 53.674
    1024 x 768XGA_60 60.004 48.363
    XGA_70 70.069 56.476
    XGA_75 75.029 60.023
    XGA_85 84.997 68.667
    1152 x 864 1152 x 864_75 75.00 67.500
    1024 x 576BenQ Notebook 
    Timing60.0 35.820
    1024 x 600BenQ Notebook 
    Timing64.995 41.467
    1280 x 720 1280 x 720_60 60 45.000
    1280 x 768 1280 x 768_60 59.870 47.776
    1280 x 800WXGA_60 59.810 49.702
    WXGA_75 74.934 62.795
    WXGA_85 84.880 71.554
    1280 x 1024SXGA_60 60.020 63.981
    SXGA_75 75.025 79.976
    1280 x 960 1280 x 960_60 60.000 60.000
    1360 x 768 1360 x 768_60 60.015 47.712
    1440 x 900 WXGA+_60 59.887 55.935
    1400 x 1050 SXGA+_60 59.978 65.317
    1680 x 1050 1680 x 1050_60 59.954 65.290
    640 x 480 
    @67HzMAC13 66.667 35.000
    832 x 624@75Hz MAC16 74.546 49.722
    1024 x 
    768@75HzMAC19 74.93 60.241
    1152 x 
    870@75HzMAC21 75.06 68.68
    Downloaded From projector-manual.com BenQ Manuals 
    						
    							Specifications 70
    Supported timing for HDMI input
    PC timings:
    Resolution ModeVe r t i c a l  
    Frequency (Hz)Horizontal 
    Frequency (kHz)
    640 x 480VGA_60 59.940 31.469
    VGA_72 72.809 37.861
    VGA_75 75.000 37.500
    VGA_85 85.008 43.269
    720 x 400 720 x 400_70 70.087 31.469
    800 x 600SVGA_60 60.317 37.879
    SVGA_72 72.188 48.077
    SVGA_75 75.000 46.875
    SVGA_85 85.061 53.674
    1024 x 768XGA_60 60.004 48.363
    XGA_70 70.069 56.476
    XGA_75 75.029 60.023
    XGA_85 84.997 68.667
    1152 x 864 1152 x 864_75 75.00 67.500
    1024 x 576BenQ Notebook 
    Timing60.000 35.820
    1024 x 600BenQ Notebook 
    Timing64.995 41.467
    1280 x 7201280 x 720_60 60 45.000
    1280 x 720_120 120 90.000
    1280 x 768 1280 x 768_60 59.870 47.776
    1280 x 800WXGA_60 59.810 49.702
    WXGA_75 74.934 62.795
    WXGA_85 84.880 71.554
    1280 x 1024SXGA_60 60.020 63.981
    SXGA_75 75.025 79.976
    1280 x 9601280 x 960_60 60.000 60.000
    1280 x 960_85 85.002 85.938
    1360 x 768 1360 x 768_60 60.015 47.712
    1440 x 900 WXGA+_60 59.887 55.935
    1400 x 1050 SXGA+_60 59.978 65.317
    1680 x 1050 1680 x 1050_60 59.954 65.290
    640 x 480@67Hz MAC13 66.667 35.000
    832 x 624@75Hz MAC16 74.546 49.772
    1024 x 
    768@75HzMAC19 75.020 60.241
    1152 x 
    870@75HzMAC21 75.06 68.68
    Downloaded From projector-manual.com BenQ Manuals 
    						
    All BenQ manuals Comments (0)

    Related Manuals for BenQ Gp2 Users Manual