BenQ Fp93gwa User Manual

Welcome
FP93GWa
19 Wide-Screen LCD Monitor
User Manual
 

2   
Copyright
Copyright © 2007 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

Table of Contents 3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 4
Getting to know your monitor  ............................................................................................ 6
Front view  ....................................................................................................................6
Back view...

4  Getting started  
1. Getting started
Your FP93GWa will provide the optimal display performance of the video resolution standard of 
1440 x 900. Please ensure that your graphic card supports the resolution of 1440 x 900. 
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Monitor Base
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product 
supplied for your region)
 

  5   Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Signal Cable: D-Sub
 

6  Getting to know your monitor  
2. Getting to know your monitor
Front view
Back view 
1. AC power input jack
2. D-Sub input socket
 

  7   How to assemble your monitor hardware
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate 
voiding your warranty. Sliding or scraping the monitor 
around on your desk...

8  How to assemble your monitor hardware  
2. Connect the PC video cable.
Connect the plug of the D-Sub cable (at the end without 
the ferrite filter) to the monitor D-Sub socket. Connect the 
other plug of the D-Sub cable (at the end with the ferrite 
filter) to the computer video D-Sub socket. 
Tighten all finger screws to prevent the plugs from acci-
dently falling out during use.
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled 
‘POWER IN’ on the rear...

  9   How to assemble your monitor hardware
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the 
front of the monitor. 
Turn on the computer too, and follow the instructions in 
Section 4: 
Getting the most from your BenQ monitor 
on page 13
 to install the monitor software.
 

10  How to assemble your monitor hardware  
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the 
power cable. Turn off the computer before unplugging the 
monitor signal cable.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate 
voiding your warranty. Sliding or scraping the monitor 
around on your desk will scratch or...