BenQ Fp92es User Manual

							  31   How to adjust your monitor
User Mode Tailors the image color 
tint. The blend of the Red, 
Green and Blue primary 
colors can be altered to 
change the color tint of the 
image. The default start 
setting is 50. Decreasing 
one or more of the colors 
will reduce their respective 
influence on the color tint 
of the image. e.g. if you 
reduce the Blue level the 
image will gradually take 
on a yellowish tint. If you 
reduce Green, the image 
will become a magenta 
tint.Press the W or X keys and 
the ENTER key to select 
Red, Green, or Blue. Then 
use the 
W or X keys to 
make the color adjustments.• Red 
(0 to 100)
• Green
(0 to 100)
• Blue
(0 to 100)
Press MENU to leave the Color menu.
Reset Color Resets the User Mode 
custom color settings to 
the factory defaults. Press the 
W or X keys to 
change the settings. • Ye s
• No
 
						

							32  How to adjust your monitor  
Picture Advanced menu
1. Press the MENU key to display the main 
menu.
2. Press the 
W or X keys to select PICTURE 
ADVANCED and then press the ENTER 
key to enter the menu.
3. Press the 
W or X keys to move the 
highlight to a menu item and then press 
the ENTER key to select that item.
4. Press the 
W or X keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Picture Mode
Selects a picture mode that 
best suits the type of 
images shown on the 
screen. 
• Standard - for basic PC
application.
• Movie - for viewing 
videos.
• Dynamics - for viewing
landscape-specific videos
and playing games.
• Photo - for viewing still
images.
• sRGB - for better color
matching representation
with the peripheral
devices, such as printers,
DSCs, etc.Press the 
W or X keys to 
adjust the value.• Standard
• Movie
• Dynamics
• Photo
• sRGB
 
						

							  33   How to adjust your monitor
Senseye Demo
Displays the preview of 
screen images under the 
selected mode from Pic-
ture Mode. The screen will 
be divided into two win-
dows; the left window
demonstrates images of 
Standard mode, while
the right window presents 
the images under the spec-
ified mode.Press the W or X keys to 
change the settings. • ON
• OFF
 
						

							34  How to adjust your monitor  
Audio menu
1. Press the MENU key to display the main 
menu.
2. Press the 
W or X keys to select AUDIO 
and then press the ENTER key to enter the 
menu.
3. Press the 
W or X keys to move the 
highlight to a menu item and then press 
the ENTER key to select that item.
4. Press the 
W or X keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Volume Adjusts the level of 
volume. Press the 
X key to increase 
the volume and press the 
W 
key to decrease the volume.0 to 100
Mute Mutes the audio input.
Press the 
W or X keys to 
change the settings. • ON
• OFF
 
						

							  35   How to adjust your monitor
System menu
1. Press the MENU key to display the main 
menu.
2. Press the 
W or X keys to select SYSTEM 
and then press the ENTER key to enter the 
menu.
3. Press the 
W or X keys to move the 
highlight to a menu item and then press 
the ENTER key to select that item.
4. Press the 
W or X keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Input Selects the D-sub (analog)
or DVI (digital) input. Use 
this to change the input to 
that appropriate to your 
video cable connection 
type.Press the 
W or X keys to 
change the settings.• DVI
• D-sub
OSD Settings - Press ENTER to enter the OSD Settings menu.
 
						

							36  How to adjust your monitor  
Language Sets the OSD menu 
language.Press the W or X keys to 
adjust the value.
The language options 
displayed on your OSD 
may differ from those 
shown on the right, 
depending on the product 
supplied in your region.
• English
• French
• German
• Italian
• Spanish
• Polish/
Japanese
• Czech/
Traditional
Chinese
• Hungarian/
Simplified 
Chinese
• Serbo-Croatian
• Romanian
• Dutch
• Russian
• Swedish
• Portuguese
H. Position Adjusts the horizontal 
position of the OSD menu. 
Press the 
W or X keys to 
change the settings. 0 to 100
V. Position Adjusts the vertical 
position of the OSD menu.0 to 100
Display Time Adjusts the display time of 
the OSD menu.• 5 sec.
• 10 sec.
• 15 sec.
• 20 sec.
• 25 sec.
• 30 sec.
 
						

							  37   How to adjust your monitor
OSD Lock Prevents all the monitor 
settings from being 
accidentally changed. 
When this function is 
activated, the OSD 
controls and hotkey 
operations will be 
disabled.Press the W or X keys to 
change the settings. 
To unlock the OSD 
controls when the OSD is 
preset to be locked, press 
and hold the ’MENU key 
for 15 seconds to enter 
the OSD Lock option and 
make changes. 
Alternatively, you may 
use the W or X keys to 
select ’OFF’ in the OSD 
Lock submenu from the 
’OSD Settings’ menu, and 
all OSD controls will be 
accessible.
• ON
• OFF
Press MENU to leave the OSD Settings menu.
Information Displays the current 
monitor property settings.Press the ENTER key to 
select this option.
Reset All Resets all mode, color and 
geometry settings to the 
factory default values.Press the 
W or X keys to 
change the settings. • Ye s
• No
 
						

							38 Troubleshooting  
9. Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the 
How to adjust the screen resolution on page 21 section, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in the 
How to adjust the screen refresh rate on page 22 section It 
is normal for blurring to occur due to conduction losses in extension cables. You can minimize 
these losses by using an extension cable with better conduction quality or with a built-in booster.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the How to adjust the screen resolution on page 21 section. Select the native resolution.
Pixel errors can be seen:
One of several pixels is permanently black, one or more pixels are permanently white, one or 
more pixels are permanently red, green, blue or another color.
•Clean the LCD screen.
•Cycle power on-off.
•These are pixels that are permanently on or off and is a natural defect that occurs in LCD 
technology.
The image has a faulty coloration:
It has a yellow, blue or pink appearance.
Select MENU > PICTURE > Color > Reset Color, and then choose “Yes” in the “Caution” message 
box to reset the color settings to the factory defaults. 
If the image is still not correct and the OSD also has faulty coloration, this means one of the three 
primary colors is missing in the signal input. Now check the signal cable connectors. If any pin is 
bent or broken off, please contact your dealer to get necessary support.
No image can be seen:
Is the prompt on the display illuminated in green?
If the LED is illuminated in green and there is a message “Out of Range” on the screen, this means 
you are using a display mode that this monitor does not support, please change the setting to one 
of the supported mode. Please read “
Supported PC Timings on page 39” section.
Faint shadow from the static image displayed is visible on the screen:
•Activate the power management function to let your computer and monitor go into a low 
power sleep mode when not actively in use.
•Use a screensaver to prevent the occurrence of image retention.
Is the prompt on the display illuminated in orange?
 
						

							  39   Troubleshooting
If the LED is illuminated in orange, the power management mode is active. Press any button on 
the computer keyboard or move the mouse. If that does not help, check the signal cable 
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the 
How to adjust the screen resolution on page 21 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the 
How to adjust the screen resolution on page 21 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible:
•To unlock the OSD controls when the OSD is preset to be locked, press and hold the “MENU” 
key for 15 seconds to enter the “OSD Lock” option and make changes. 
•Alternatively, you may use the 
W or X keys to select “OFF” in the “OSD Lock” submenu 
from the “OSD Settings” menu (under SYSTEM), and all OSD controls will be accessible.
Need more help?
If your problems remain after checking this manual, please contact your place of purchase or 
e-mail us at: [email protected]
 
						

							40  Supported PC Timings  
10. Supported PC Timings
•Modes not listed in the table may not be supported. For an optimal picture, we recommended 
you choose a mode listed in the table above.
•There are 22 available modes that are compatible with Windows. 
•Image disruption may occur as a result of signal frequency differences from graphic cards 
which do not correspond with the usual standard. This is not, however, an error. You may 
improve this situation by altering an automatic setting or by manually changing the phase 
setting and the pixel frequency from the “DISPLAY” menu.
•If you switch off the monitor, interference lines can occur on your screen. But do not be 
concerned about this, as it is normal. 
•To extend the service life of the product, we recommend that you use your computers power 
management function. 
Incoming display mode (Input timing)
ResolutionHorizontal 
Frequency (KHz)Ve r t i c a l  
Frequency (Hz)Pixel 
Frequency (MHz)Comment
640x350 31.47(P) 70.08(N) 25.17 DOS
720x400 31.47(N) 70.08(P) 28.32 DOS
640x480 31.47(N) 60.00(N) 25.18 DOS
640x480 35.00(N) 67.00(N) 30.24 Macintosh
640x480 37.86(N) 72.80(N) 31.50 VESA
640x480 37.50(N) 75.00(N) 31.50 VESA
800x600 35.16(P) 56.25(P) 36.00 VESA
800x600 37.88(P) 60.32(P) 40.00 VESA
800x600 48.08(P) 72.19(P) 50.00 VESA
800x600 46.87(P) 75.00(P) 49.50 VESA
832x624 49.72(N) 74.55(N) 57.29 Macintosh
1024x768 48.36(N) 60.00(N) 65.00 VESA
1024x768 56.48(N) 70.10(N) 75.00 VESA
1024x768 60.02(P) 75.00(P) 78.75 VESA
1152x864 67.50(P) 75.00(P) 108.00 VESA
1152x870 68.68(N) 75.06(N) 100.00 Macintosh
1152x900 61.80(N) 66.00(N) 94.50 SUN 66
1152x900 71.81(N) 76.14(N) 108.00 SUN
1280x1024 64.00(P) 60.00(P) 108.00 VESA
1280x1024 75.83(N) 71.53(N) 128.00 IBMI
1280x1024 80.00(P) 75.00(P) 135.00 VESA
1280x1024 81.18(N) 76.16(N) 135.09 SPARC2