BenQ Fp91e User Manual

							  21   How to set the picture optimization
How to set the picture optimization 
The easiest way to obtain an optimal display is to use the i key function. Press the i key to 
optimize and adjust the screen settings automatically for you. Refer to How to adjust your 
monitor for button locations and functionality. 
If you wish to, you can always adjust the screen settings manually using the buttons on the 
monitor panel. To assist you in this endeavour, BenQ has provided a screen test image utility 
which you can use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as 
the desktop of your operating system. However, we recommend that you use auto.exe. As you 
run auto.exe, a test pattern displays.
2. Press the Enter key to access the monitor On-Screen Display (OSD) menu.
3. If you notice a vertical noise, press the 
W or X keys to select Geometry and press the Enter 
key. Then press the
W or X keys to select Pixel Clock and press the Enter key again. Then, 
press the
W or X key to adjust the monitor until the noise disappears.
4. If you notice a horizontal noise, press the
W or X keys to select Geometry and press the 
Enter key. Then press the 
W or X keys to select Phase and press the Enter key again. Then, 
press the 
W or X keys to adjust the monitor until the noise disappears.
To make sure the 
i key function performs well, you have to select one of the supported modes. If 
the 
i key does not work properly and the NON PRESET MODE message is on the OSD, it means 
you are not using one of the supported modes. Please set your monitor to use one of the 
supported modes as listed at the end of this manual.
11
17
 
						

							22 How to adjust your monitor  
How to adjust your monitor
A Look at the Control Panel
There are 7 keys for user’s control including “Enter”, “W” ,  “X”,  “Exit” ,  “Mode” ,  “iKey” and a 
power switch. The following descriptions are the introduction of these keys & switch.
1. “
iKey” : Adjust vertical position, phase, horizontal position and pixel clock automatically. When 
the Mode Demo is on,  press “
iKey” will turn the Mode Demo off.
2. “Mode” key: Switch between different modes, including Standard, Movie 1, Movie 2, and Photo.
3. “Exit” key: Back to previous menu or exit OSD. This key is also the hot key for volume.
4.
W  (Left) key: For Left/Decrease adjustment.  This key is also the hot key for Contrast.
5.
X (Right) key: For Right/Increase adjustment. This key is also the hot key for Brightness.
6. “Enter” key: Activate OSD, enter sub menu, select items, and confirm selection.
7. “Power”: Turn the power on or off.
8
1         2                  3          4          5          6              7
 
						

							  23   How to adjust your monitor
Hot Key Mode
Brightness and Contrast hot key   
Volume hot key
Mode hot key Press 
X to enter Brightness menu, press W or 
X to adjust the degree of brightness and press 
“Exit” to exit OSD. 
Press 
Wto enter Contrast menu, press W or X 
to adjust the degree of Contrast and press “Exit” 
to leave the OSD. 
Press “Exit” to enter Volume menu. Press W or 
X key to adjust the degree of volume and press 
“Exit” to exit the OSD. 
Press the Mode key to enter the Mode menu. 
Keep pressing the key to switch between these 
four options: Standard, Movie 1, Movie 2, and 
Photo. The specified mode will optimise the 
image properties to best suit the image type. 
Standard mode is suggested for basic PC 
application; Movie 1, enhancing color and 
contrast level, is for viewing videos, while the 
Movie 2 mode best suits landscape-specific 
videos; Photo is designed for viewing still 
images. The newly defined settings will be 
activated spontaneously.
When the adjustment is done, the Mode menu 
will disappear in 2 to 3 seconds.
 
						

							24 How to adjust your monitor  
Main Menu Mode
Control Functions Available in Main Menu        
Luminance sub menu
Main Menu
The operation mode is displayed in the top right corner of the main menu.
Press W or X key to adjust the degree of 
Brightness, press “Exit” to return to the 
previous menu. 
Press 
W or X key to adjust the degree of 
Contrast, press “Exit” to return to the previous 
menu.
 
						

							  25   How to adjust your monitor
Geometry sub menu
Press W or X key to adjust the Horizontal 
Position, press “Exit” to return to previous 
menu.
Press 
W or X key to adjust the Vertical 
Position, press “Exit” key to return to previous 
menu.
Press 
W or Xkey to adjust the value of the 
Pixel Clock, press “Exit” to return to previous 
menu.
Press 
W or X key to adjust the degree of Phase, 
press “Exit” to return to previous menu.
 
						

							26 How to adjust your monitor  
   Color sub menu
Bluish    - applies a cool tint to the image and is factory pre-set to the PC industry standard white 
color.
Reddish - applies a warm tint to the image and is factory pre-set to the news print standard white 
color.
Normal  - allows video and still photographs to be viewed with natural coloring. This is the factory 
default color.
User Preset
User Preset is provided so you can tailor the 
image color tint to suit your liking. The blend of 
the Red, Green and Blue primary colors can be 
altered to change the color tint of the image. The 
default start setting is 50. Decreasing one or 
more of the colors will reduce their respective 
influence on the color tint of the image. e.g. if 
you reduce the Blue level the image will 
gradually take on a yellowish tint. If you reduce 
Green, the image will become a magenta tint.
To reset the defaults, see Recall sub menu for details.
 
						

							
  27
   How to adjust your monitor
   
OSD sub menu
Press W or X key to adjust the Horizontal 
Position of the OSD, press “Exit” to return to 
previous menu.
Press
W or X key to adjust the Vertical Position 
of the OSD, press “Exit” to return to previous 
menu.
Press 
W or X key to adjust the display time of 
the OSD, press “Exit” to return to previous 
menu.
 
						

							28 How to adjust your monitor  
 
Language sub menu
Press the 
W or X keys to select a language to have the OSD display menus in that language.
Press the Exit key to return to previous menu.
 
						

							
  29
   How to adjust your monitor
Recall sub menu
Press W or X key to confirm Mode Recall. 
When you choose Yes, it will recall the current 
mode to default settings. 
Press “Exit” will return to previous menu.
Press 
W or X key to confirm Color Recall. 
When you choose Yes, it will recall the current 
color settings to default settings. 
Press “Exit” will return to previous menu.
Press 
W or X key to confirm Recall All. When 
you choose Yes, it will recall all the current 
settings to default settings. 
Press “Exit” will return to previous menu.
 
						

							
30 How to adjust your monitor   
Miscellaneous sub menu
Mode: 
Select your desired mode from these four 
options: Standard, Movie 1, Movie 2, and 
Photo. The specified mode will optimize the 
image properties to best suit the image type. 
Standard mode is suggested for basic PC 
application; Movie 1, enhancing color and 
contrast level, is for viewing  videos, while the 
Movie 2 mode best suits landscape-specific 
videos; Photo is designed for viewing still 
images.
When done, press Enter to activate the 
settings. To return to previous menu, press 
Exit.
Mode Demo :
Mode Demo allows you to preview the effects of 
the selected Mode from Mode menu. 
When you choose On and press Enter to 
activate Mode Demo, the display will be divided 
into two windows; the left window 
demonstrates images of Standard mode, while 
the right window presents the images under the 
specified mode. 
 To return to previous menu, press Exit.