BenQ Fp91e User Manual

FP91E
LCD Color Monitor
19.0 LCD Panel Size
User’s Manual
We l c o m e
 

2   
Copyright
Copyright © 2005 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

Table of Contents 3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 5
Getting to know your monitor  ............................................................................................ 7
Front View  ................................................................................................................... 7
Back View (1)...

Table of Contents 4
 

  5   Getting started
Getting started
When unpacking please check you have the following items. If they are missing or are damaged, 
please immediately contact the dealer at which you purchased the goods.
 
1
BenQ LCD Monitor
Quick Start Guide
 
CD-ROM Disk
Power Cord
Signal Cable: D-Sub
 
Signal Cable: DVI-D
 
P/N:53.L9003.002
 

6 Getting started  
Audio Cable 
 

  7   Getting to know your monitor
Getting to know your monitor
Front View
Back View (1)
2
 

8 Getting to know your monitor  
Back View (2): Locations of plugs & sockets
1. Audio Connector
2. Power AC Input Jack
3. DVI-D Connector
4. D-Sub Connector
                                                                    
1    2            3        4
 

  9
   How to install your monitor hardware
How to install your monitor hardware
If the computer is turned on you must turn it off before continuing. 
  Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Unpack the monitor and place it on a stable surface.
You should position the monitor and angle the screen 
to minimize unwanted refl ections from other light 
sources.  
2. Connect the video cable.   
Connect one end of the DVI-D cable to the monitor 
DVI-D socket and the...

10 How to install your monitor hardware  
4. Connect the audio cable.
Connect the audio cable between the socket on the rear of 
the monitor and your computer audio outlet.
Optional: Connect an earphone into the earphone 
jack located on the underside of the control panel as 
shown. 
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point 
and turn it on.
Picture may differ from product supplied for your 
region.
Turn on the monitor by pressing the power button on the...