BenQ Fp91e User Manual

  31   How to adjust your monitor
Input Select: 
Select D-sub (analog) or DVI (digital) input to 
activate the new settings.
Sharpness:
Press the 
W or X key to adjust the degree of 
Sharpness and activate the new settings. 
Display Information:
Select Display Information to display the 
current monitor proerty settings. 
Press the Exit key to return to previous menu.
AMA:
Select the 
W or X key to confirm AMA. When 
you choose “On”, it will improve the gray level 
response time of the LCD panel.
To...

32 How to adjust your monitor  
Audio sub menu 
Volume:
Press 
W or Xkey to adjust the degree of 
Volume. 
SRS:
Press 
W or X key to select “ON” or “OFF” 
for SRS function.
Mute:
Press 
W or X key to select “ON” or “OFF” 
for Mute.
 

  33   Troubleshooting
Troubleshooting
Frequently Asked Questions (FAQ)
The image is blurred:
Read the How to adjust the screen resolution section, and then select the correct resolution, 
refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in the How to adjust the screen refresh rate section. It is 
normal for blurring to...

34 Troubleshooting  
The image is distorted, flashes or flickers:
Read the How to adjust the screen resolution section and then select the correct resolution, 
refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the How to adjust the screen resolution section and then select the correct resolution, 
refresh rate and make adjustments based on these instructions.
Need More Help?
If your problems remain after checking this manual, please contact your...

  35   Supported operating modes
Supported operating modes
•  Modes not listed in the table may not be supported. For an optimal picture, we recommended 
you choose a mode listed in the table above.
•  There are 22 available modes that are compatible with Windows. 
•  Image disruption may occur as a result of signal frequency differences from VGA cards which do 
not correspond with the usual standard. This is not, however, an error. You may improve this 
situation by altering an automatic setting or by...

36 Specifications  
Specifications
BenQ FP91E
11
ModelFP91E
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Response time 
Viewing angle 
(left/right, up/down) 19.0 , active, TFT
480 mm
1280 x 1024
16.7 million
1000:1 / 250 cd/m
2
25 ms (Ton + Toff)
  8 ms (GTG)
170/170 (CR=10)
Line frequency 
Image frequency31 - 81 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image checks 
Controls 
FunctionsDigital, Screen OSD Technology, iKey...

  37
   Specifications
Input signal 
   PC
   Speaker
Synchronization RGB analog 0.7 Vpp/
75 Ohm positive 
Digital: DVI-D
2W x 2
 is a trademark of SRS Labs, Inc. SRS 
technology is incorporated under license from 
SRS Labs, Inc
.
TTL separate signal connection 15-pin mini 
D-sub cable  
Temperature (operating) 
Air humidity (operating) 0 °C - 40 °C
10% - 90%
Certifications TCO 99/03, TÜV/ Ergonomics, TÜV/ GS, FCC 
Class B, ISO 13406-2 , VCCI, CSA, CB 
Report, CE, C-Tick, BSMI, Fimko, GOST
Operating...