BenQ Fp71g User Manual

Welcome
FP71G/FP71G+/FP71G+u
LCD Color Monitor
17.0 LCD Panel Size
User’s Manual
 

2   
Copyright
Copyright © 2006 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to...

3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 4
Getting to know your monitor  ............................................................................................ 5
Front View  ................................................................................................................... 5
Back View...

  4   Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
  
11
11
BenQ LCD Monitor
 
Quick Start Guide
  
CD-ROM
 
Power Cord
Signal Cable: D-Sub
P/N:53.L9003.002
 

5 Getting to know your monitor  
Getting to know your monitor
Front View
Back View 
1. Power AC input jack
2. D-Sub Connector
11
12
 

  6   How to install your monitor hardware
How to install your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler 
or a mouse will crack the glass or damage the LCD 
substrate voiding your warranty. Sliding or scraping 
the monitor around on your desk will...

7 How to install your monitor hardware  
2. Connect the video cable.   
Connect the plug of the D-Sub cable (at the end without 
the ferrite filter) to the monitor D-Sub socket. Connect 
the other plug of the D-Sub cable (at the end with the 
ferrite filter) to the computer video D-Sub socket. 
Tighten all finger screws to prevent the plugs from 
accidently falling out during use.
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
’POWER IN’ on the rear of...

  8   How to install your monitor hardware
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point
and turn it on.
Turn on the monitor by pressing the power button on the
front of the monitor. 
Turn on the computer too, and follow the instructions in
Section 4: 
Getting the most from your BenQ monitor to install
the monitor software.
 
 

9 How to install your monitor hardware  
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler 
or a mouse will crack the glass or damage the LCD 
substrate voiding your warranty. Sliding or scraping 
the monitor around on your desk will scratch or 
damage...

  10   Getting the most from your BenQ monitor
Getting the most from your BenQ monitor
How do I gain the most benefit from my new monitor?
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install 
the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor 
CD-ROM. 
The circumstances under which you connect and install your BenQ LCD Monitor will determine 
which process you need to follow to successfully install the BenQ LCD Monitor driver...