BenQ Fp222wh User Manual

  31   How to adjust your monitor
Senseye Demo
Displays the preview of 
screen images under the 
selected mode from 
Picture Mode. The screen 
will be divided into two 
windows; the left window
demonstrates images of 
Standard mode, while
the right window presents 
the images under the 
specified mode.Press the t or u keys to 
change the settings. • ON
• OFF
 

32  How to adjust your monitor  
System menu
1. Press the MENU key to display the main 
menu.
2. Press the 
t or u keys to select SYSTEM 
and then press the ENTER key to enter the 
menu.
3. Press the 
t or u keys to move the 
highlight to a menu item and then press the 
ENTER key to select that item.
4. Press the 
t or u keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Input Uses this to change the 
input to that appropriate...

  33   How to adjust your monitor
*HDMI, short for High Definition Multimedia Interface, is the first industry-supported, uncompressed, 
all-digital audio/video interface between audio/video sources and audio and/or video monitors. Being 
different from other connectors, an HDMI connector can carry both video and audio signals via the same 
cable and transfer uncompressed digital audio and video for the highest image quality. It supports digital 
televisions (DTV), set-top boxes, DVD players, and DVD...

34 Troubleshooting  
9. Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the 
How to adjust the screen resolution on page 19 section, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in the 
How to adjust the screen refresh rate on page 20 section It 
is...

  35   Troubleshooting
The image is distorted, flashes or flickers:
Read the 
How to adjust the screen resolution on page 19 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the 
How to adjust the screen resolution on page 19 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible:
•To unlock the OSD controls...

36  Supported PC Timings  
10. Supported PC Timings
•Image disruption may occur as a result of signal frequency differences from graphic cards which 
do not correspond with the usual standard. This is not, however, an error. You may improve this 
situation by altering an automatic setting or by manually changing the phase setting and the 
pixel frequency from the “Display” menu.
•To extend the service life of the product, we recommend that you use your computers power 
management function. 
Incoming...

  37   Specifications
11. Specifications
ModelFP222W H
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Dynamic contrast ratio
Response time 
Viewing angle (left/right, up/down) 22.0”, active, TFT
558.68 mm
1,680 x 1,050
16.7 million
700:1 / 300 cd/m
2
2000:1 (typical)
5 ms 
170, 160 (CR>
10)
Line frequency 
Image frequency30 - 82 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image diagnostics 
Controls 
FunctionsDigital, OSD Technology, 
i...

38 Specifications  
*HDMI, short for High Definition Multimedia Interface, is the first industry-supported, uncompressed, 
all-digital audio/video interface between audio/video sources and audio and/or video monitors. Being 
different from other connectors, an HDMI connector can carry both video and audio signals via the same 
cable and transfer uncompressed digital audio and video for the highest image quality. It supports digital 
televisions (DTV), set-top boxes, DVD players, and DVD recorders, etc....