BenQ Fp222wh User Manual

							  31   How to adjust your monitor
Senseye Demo
Displays the preview of 
screen images under the 
selected mode from 
Picture Mode. The screen 
will be divided into two 
windows; the left window
demonstrates images of 
Standard mode, while
the right window presents 
the images under the 
specified mode.Press the t or u keys to 
change the settings. • ON
• OFF
 
						

							32  How to adjust your monitor  
System menu
1. Press the MENU key to display the main 
menu.
2. Press the 
t or u keys to select SYSTEM 
and then press the ENTER key to enter the 
menu.
3. Press the 
t or u keys to move the 
highlight to a menu item and then press the 
ENTER key to select that item.
4. Press the 
t or u keys to make 
adjustments or selections.
5. To return to the previous menu, press the 
MENU button.
ItemFunctionOperationRange
Input Uses this to change the 
input to that appropriate 
to your video cable 
connection type.Press the 
t or u keys to 
change the settings.• DVI
• D-sub
• HDMI*
OSD Settings - Press ENTER to enter the OSD Settings menu.
Language Sets the OSD menu 
language.Press the 
t or u keys to 
change the settings.
The language options 
displayed on your OSD 
may differ from those 
shown on the right, 
depending on the product 
supplied in your region.
• English
• French
• German
• Italian
• Spanish
• Polish/
Japanese
• Czech/
Traditional
Chinese
• Hungarian/
Simplified 
Chinese
• Serbo-Croatian
• Romanian
• Dutch
• Russian
• Swedish
• Portuguese
H. Position Adjusts the horizontal 
position of the OSD menu. Press the 
t or u keys to 
change the settings.0 to 100
 
						

							  33   How to adjust your monitor
*HDMI, short for High Definition Multimedia Interface, is the first industry-supported, uncompressed, 
all-digital audio/video interface between audio/video sources and audio and/or video monitors. Being 
different from other connectors, an HDMI connector can carry both video and audio signals via the same 
cable and transfer uncompressed digital audio and video for the highest image quality. It supports digital 
televisions (DTV), set-top boxes, DVD players, and DVD recorders, etc. The HDMI connector on your 
FP222W H supports video source only.   
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics 
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for 
remote diagnostics.
V. Position Adjusts the vertical 
position of the OSD menu.Press the t or u keys to 
change the settings.0 to 100
Display Time Adjusts the display time of 
the OSD menu.Press the 
t or u keys to 
change the settings.• 5 Sec.
• 10 Sec.
• 15 Sec.
• 20 Sec.
• 25 Sec.
• 30 Sec.
OSD Lock Prevents all the monitor 
settings from being 
accidentally changed. 
When this function is 
activated, the OSD 
controls and hotkey 
operations will be 
disabled.Press the 
t or u keys to 
change the settings.
To unlock the OSD 
controls when the OSD is 
preset to be locked, press 
and hold the MENU 
button for 15 seconds to 
enter the OSD Lock 
option and make 
changes. Alternatively, 
you may use the t or u 
keys to select ’OFF’ in the 
OSD Lock submenu 
from the ’OSD Settings’ 
menu, and all OSD 
controls will be 
accessible.
• ON
• OFF
Press MENU to leave the OSD Settings menu.
DDC/CI* Allows the monitor 
settings to be set through 
the software on the PC.Press the ENTER key to 
select this option. Press the 
t or u keys to change the 
settings.• ON
• OFF
Information Displays the current 
monitor property settings.Press the ENTER key to 
select this option.
Reset All Resets all mode, color and 
geometry settings to the 
factory default values.Press the 
t or u keys to 
change the settings.• Ye s
• No
 
						

							34 Troubleshooting  
9. Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the 
How to adjust the screen resolution on page 19 section, and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by 
working through the instructions in the 
How to adjust the screen refresh rate on page 20 section It 
is normal for blurring to occur due to conduction losses in extension cables. You can minimize 
these losses by using an extension cable with better conduction quality or with a built-in booster.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the How to adjust the screen resolution on page 19 section. Select the native resolution.
Pixel errors can be seen:
One of several pixels is permanently black, one or more pixels are permanently white, one or 
more pixels are permanently red, green, blue or another color.
•  Clean the LCD screen.
•  Cycle power on-off.
•  These are pixels that are permanently on or off and is a natural defect that occurs in LCD 
technology.
The image has a faulty coloration:
It has a yellow, blue or pink appearance.
Select MENU > PICTURE > Color > Reset Color, and then choose “Yes” in the “Caution” message 
box to reset the color settings to the factory defaults. 
If the image is still not correct and the OSD also has faulty coloration, this means one of the three 
primary colors is missing in the signal input. Now check the signal cable connectors. If any pin is 
bent or broken off, please contact your dealer to get necessary support.
No image can be seen:
Is the prompt on the display illuminated in green?
If the LED is illuminated in green and there is a message “Out of Range” on the screen, this means 
you are using a display mode that this monitor does not support, please change the setting to one 
of the supported mode. Please read “
Supported PC Timings on page 36” section. Recommended 
mode is 1680 x 1050 @ 60Hz.
Is the prompt on the display illuminated in orange?
If the LED is illuminated in orange, the power management mode is active. Press any button on 
the computer keyboard or move the mouse. If that does not help, check the signal cable 
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
 
						

							  35   Troubleshooting
The image is distorted, flashes or flickers:
Read the 
How to adjust the screen resolution on page 19 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The image is displaced in one direction:
Read the 
How to adjust the screen resolution on page 19 section and then select the correct 
resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible:
•To unlock the OSD controls when the OSD is preset to be locked, press and hold the “MENU” 
key for 15 seconds to enter the “OSD Lock” option and make changes. 
•Alternatively, you may use the 
t or u keys to select “OFF” in the “OSD Lock” submenu from 
the “OSD Settings” menu (under SYSTEM), and all OSD controls will be accessible.
Need more help?
If your problems remain after checking this manual, please contact your place of purchase or 
e-mail us at: [email protected]
 
						

							36  Supported PC Timings  
10. Supported PC Timings
•Image disruption may occur as a result of signal frequency differences from graphic cards which 
do not correspond with the usual standard. This is not, however, an error. You may improve this 
situation by altering an automatic setting or by manually changing the phase setting and the 
pixel frequency from the “Display” menu.
•To extend the service life of the product, we recommend that you use your computers power 
management function. 
Incoming display mode (Input timing)
ResolutionHorizontal 
Frequency (KHz)Ve rt ic a l  
Frequency (Hz)Pixel 
Frequency (MHz)Comment
640x350 31.47 70.08 25.17 DOS
720x400 31.47 70.08 28.32 DOS
640x480 31.47 60.00 25.18 DOS
640x480 35.00 67.00 30.24 Macintosh
640x480 37.86 72.80 31.50 VESA
640x480 37.50 75.00 31.50 VESA
800x600 37.88 60.32 40.00 VESA
800x600 48.08 72.19 50.00 VESA
800x600 46.86 75.00 49.50 VESA
832x624 49.72 74.55 57.29 Macintosh
1024x768 48.36 60.00 65.00 VESA
1024x768 56.48 70.10 75.00 VESA
1024x768 60.02 75.00 78.75 VESA
1024x768 60.24 74.93 80.00 Macintosh
1152x864 67.50 75.00 108.00 VESA
1152x870 68.68 75.06 100.00 Macintosh
1152x900 61.80 66.00 94.50 SUN 66
1152x900 71.81 76.14 108.00 SUN
1280x1024 64.00 60.00 108.00 VESA
1280x1024 75.83 71.53 128.00 IBMI
1280x1024 80.00 75.00 135.00 VESA
1280x1024 81.18 76.16 135.09 SPARC2
1680x1050 75.00 60.00 162.00 VESA
 
						

							  37   Specifications
11. Specifications
ModelFP222W H
Display type 
Viewable diagonal 
Native (maximum) resolution
Colors
Contrast / Brightness
Dynamic contrast ratio
Response time 
Viewing angle (left/right, up/down) 22.0”, active, TFT
558.68 mm
1,680 x 1,050
16.7 million
700:1 / 300 cd/m
2
2000:1 (typical)
5 ms 
170, 160 (CR>
10)
Line frequency 
Image frequency30 - 82 kHz Multi- frequency monitor
56 - 76 Hz modes within these parameters
Image diagnostics 
Controls 
FunctionsDigital, OSD Technology, 
i  key (automatic image 
setting) 
7 buttons and 
i  key.
Contrast, brightness, vert. & hor. image position, 
phase, pixel clock, color balance, color palette, 
picture mode, Senseye demo, multiple-language 
OSD, OSD position, OSD lock, DDC/CI*, input 
selection, DynamicContrast
Power management
Max. power consumption 
Standby power consumptionVESA DPMS, EPA
<
 49 Watt 
<
 1 Watt, 120 V
<
 2 Watt, 240 V
Input signal 
PC
SynchronizationRGB analog 0.7 Vpp/75 Ohm positive 
Digital: DVI-D, HDMI* (optional)
TTL separate signal connection 15-pin mini D-sub 
cable 
Temperature (operating) 
Air humidity (operating)0 °C - 40 °C
10% - 90%
Certifications TCO 03, TÜV/Ergonomics, TÜV/GS, FCC Class 
B, ISO 13406-2, VCCI, CB Report, CE, C-Tick, 
BSMI, Fimko, GOST, CSA, CCC, MIC
 
						

							38 Specifications  
*HDMI, short for High Definition Multimedia Interface, is the first industry-supported, uncompressed, 
all-digital audio/video interface between audio/video sources and audio and/or video monitors. Being 
different from other connectors, an HDMI connector can carry both video and audio signals via the same 
cable and transfer uncompressed digital audio and video for the highest image quality. It supports digital 
televisions (DTV), set-top boxes, DVD players, and DVD recorders, etc. The HDMI connector on your 
FP222W H supports video source only. 
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics 
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for 
remote diagnostics.
Operating voltage 
Dimensions (H x W x D) 
WeightAutomatic switched mode power supply, 
100-240 V, 50-60 Hz
422.45 x 518.26 x 169.57 mm
5.8 kg