BenQ Fp202wa User Manual

  11   How to assemble your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the 
power cable. Turn off the computer before unplugging the 
monitor signal cable.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate 
voiding your warranty. Sliding or scraping the monitor 
around on your desk will scratch or...

12  Getting the most from your BenQ monitor  
4. Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install 
the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will determine 
which process you need to follow to successfully install the BenQ LCD Monitor driver software. 
These circumstances relate to which version of...

  13   Getting the most from your BenQ monitor
To install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
software on a new computer which has never had a monitor driver installed before. This 
instruction is only suitable for a computer which has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has...

14  Getting the most from your BenQ monitor  
To upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software 
on your Microsoft Windows computer. It is currently tested as compatible (and recommended 
only) for Windows XP and Windows Vista Operating System (OS). 
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of 
Windows, however, as at the time of writing, BenQ has done no...

  15   Getting the most from your BenQ monitor
How to install on Windows Vista system
1. Open Display Settings.
Right-click the desktop and select Personalize from the popup menu.
Select Display Settings from the Personalize appearance and sounds window. 
The Display Settings window will display.
2. Click the Advanced Settings button. 
The Generic PnP Monitor Properties window will display.
3. Click the Monitor tab and the Properties button.
4. Click Continue in the prompted User Account Control window....

16  Getting the most from your BenQ monitor  
How to install on Windows XP system
1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop. 
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel. 
In Windows XP version, Control Panel is located directly under the main Start menu item. 
The menu options displayed will depend upon which type of view is selected for...

  17   How to adjust the screen resolution
5.  How to adjust the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. 
The best possible picture for your FP202W V3/FP202W A is achieved with a resolution of 
1680 x 1050. This is called “Native Resolution” or maximal resolution – that is, the clearest picture. 
Lower resolutions are displayed on a full screen through an interpolation circuit. Image blurring 
across pixel boundaries can...

18  How to adjust the screen refresh rate  
6. How to adjust the screen refresh rate 
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not 
technically possible for an LCD display to flicker. The best results are obtained by using the factory 
modes already set in your computer. There is a table with the factory modes in the specification 
section of this Users Manual: 
Supported PC Timings on page 34
You can choose 60 Hertz for the native resolution of 1680 x...

  19   Picture optimization
7. Picture optimization 
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the i key 
function. Press the 
i key to optimize the currently displayed image to the screen. 
When you connect a digital video output using a digital (DVI) cable to your monitor, the i key and the Auto 
Adjustment function will be disabled, because the monitor will automatically display the best image. 
Please ensure that the connected graphic card on your computer is...

20  How to adjust your monitor  
8. How to adjust your monitor
The control panel
1. “Power”: Turn the power on or off.
2. “ENTER” key: Enter sub menus and select items.
3.
t (Up) key: For Up/Increase adjustment. The key is also the hot key for Brightness.
4.
u (Down) key: For Down/Decrease adjustment.  The key is also the hot key for Contrast.
5. “Exit” key: Activate OSD main menu and return to the previous menu or exit OSD.
6. “Mode” key: Switch between different modes, including Standard, Movie,...