BenQ Ew2430v User Manual

  11   How to assemble your monitor hardware
You should position the monitor and angle the screen to 
minimize unwanted reflections from other light sources. 
2. Connect the video cable.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without 
the ferrite filter) to the monitor video socket. Connect the 
other end of the cable (at the end with the ferrite filter) to 
the computer video socket.
Tighten all finger screws to prevent the plugs from 
accidently falling out during...

12  How to assemble your monitor hardware  
The video cable included in your package and the socket illustrations on the right may vary depending on 
the LCD model.
If there is more than one video transmission method available to you, you might want to take the picture 
quality of each video cable into consideration before making the connection.
- Best quality: HDMI / DVI-D
- Better quality: D-Sub
- Good quality: Component
3. Connect the audio cable.
To Input Audio Signals
Connect the provided audio...

  13   How to assemble your monitor hardware
• Or you can output audio using the built-in speakers on 
the monitor.
The output priority of the audio signals detected on your monitor is headphone jack, Line Out socket, and 
the built-in speakers. Your monitor scans for available sockets and outputs audio signals in this order if 
audio cables are connected properly.
A headphone should be connected to the headphone jack only; connection to other jacks may cause 
damage to the headphone. If you prefer to...

14  How to assemble your monitor hardware  
6. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power key. 
Turn on the computer too, and follow the instructions in 
Getting the most from your BenQ monitor on page 
17
 to install the monitor software.
To extend the service life of the product, we recommend 
that you use your computers power management...

  15   How to assemble your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging 
the power cable. Turn off the computer before unplugging 
the monitor signal cable.
Protect the monitor and screen by clearing a flat open 
area on your desk and placing a soft item like a towel on 
the desk for padding, before laying the screen face down 
on a flat clean padded surface.
2. Release the thumbscrew on the bottom of the 
monitor...

16  How to assemble your monitor hardware  
Using the monitor wall mounting kit
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the 
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit, please 
read the precautions carefully.
Precautions:
•Install your monitor and monitor mounting kit on a wall with flat surface.
•Ensure that the wall material is stable to support the weight of the monitor.
•Turn off the monitor and the power...

  17   Getting the most from your BenQ monitor
5. Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install 
the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will determine 
which process you need to follow to successfully install the BenQ LCD Monitor driver software. 
These circumstances relate to which version of...

18  Getting the most from your BenQ monitor  
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
software on a new computer which has never had a monitor driver installed before. This 
instruction is only suitable for a computer which has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that...

  19   Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software 
on your Microsoft Windows computer. It is currently tested as compatible for Windows XP, 
Windows Vista, and Windows 7 Operating System (OS). 
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, 
however, as at the time of writing, BenQ has done no testing of...

20  Getting the most from your BenQ monitor  
How to install on Windows 7 system
1. Open Display Properties.
Go to Start, Control Panel, Hardware and Sound, Devices and Printers and right-click the 
name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers, and 
right-click the name of your monitor from the menu.
2. Select Properties from the menu.
3. Click the 
Hardware tab.
4. Click 
Generic PnP Monitor, and then the Properties...