BenQ Ew2430v User Manual

LCD Monitor
User Manual
EW2430V
EW2730V
 

Copyright
Copyright © 2011 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to the...

Table of Contents
Copyright .......................................................................................................................... 2
Disclaimer ......................................................................................................................... 2
Getting started  .................................................................................................................. 4
Getting to know your monitor...

4  Getting started  
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Monitor Base
Quick Start Guide
 
CD-ROM
 
Remote Control
(EW2730V only)
Power Cord
(Picture may differ from product supplied 
for your region.)
Video Cable: D-Sub 
 

  5
  Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal  for protecting the monitor during transport.
Always keep the product and accessories out of reach of small children. 
Audio Cable
Audio cable: RCA (L/R)
USB Cable
 
Video Cable: DVI-D 
(Optional accessory for models with DVI 
inputs, sold separately)
Video Cable: HDMI
(Optional accessory for models with 
HDMI inputs, sold separately)...

6  Getting to know your monitor  
2. Getting to know your monitor
Front view
Back view
 Above diagram may vary depending on the model.1. USB port x 4 (downstream; 
connecting to USB devices)
2. Speakers
3. Power button
4. Remote control sensor (EW2730V 
only)
5. Control buttons
6. AC Power Input jack
7. Headphone jack
8. Audio Line In
9. Audio Line Out
10.Audio input jacks (L/R)
11. HDMI socket x 2
12.DVI-D socket 
13.Component input sockets (YPbPr)
14.D-Sub socket
15.USB port x 1 (upstream; connecting...

  7   Getting to know your monitor
Connection
The following connection illustrations are for your reference only. For cables that are not supplied 
with your product, you can purchase them separately.
For detailed connection methods, see page 11 - 13.
Headphone
Speakers
Gaming 
consolePC/NotebookBlu-ray player
Set-up box, 
HDTV receiver, 
Camcorder, 
DVD playerUSB peripherals
 

8  Getting to know the remote control (EW2730V 
3. Getting to know the remote control (EW2730V only)
Front view
OSD = On Screen Display.1. Mute button Mutes the volume.
2. Input source button Switches between different video signals that may be connected to 
your monitor.
3. Senseye mode button Switches to different Senseye modes.
4. Volume up button Increases the volume.
5. Volume down button Decreases the volume.
6. Brightness/Contrast button •Adjusts the balance between light and dark shades.
•Adjusts...

  9   Getting to know the remote control (EW2730V only)
Installing the battery
1. Turn over the remote control. Remove the battery 
cover as illustrated.
 
2. Remove the battery insulation sheet.
3. Replace the provided battery onto the battery holder 
properly. Make sure that the positive terminal (+) 
faces upward.
4. Replace the battery cover.
The remote control is ready to use now.
1
2
 

10  How to assemble your monitor hardware  
4. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. 
Placing the screen surface on an object like a stapler or a 
mouse will crack the glass or damage the LCD substrate 
voiding your warranty. Sliding or scraping the monitor 
around on your desk...